Whether you use a boiler or furnace heating system, you will experience several issues with your system after a certain period. When this happens, the first thing that might come to your mind is to call an oil Furnace & Boiler Repair service provider like JetAirCo. As one of the leading Furnaces and Boilers system providers in the regions of Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA, JetAirCo’s professionals are always available to handle Oil Burner Service quickly, Boiler repair service, Furnace Repair Services, and Boiler Installation issues. Therefore, you can rely upon us at any time of the day.

But do you know? There are specific tasks that you can perform on your own. Here, for your help, JetAirCo’s professionals come with some pocket-friendly steps that you can attempt to prevent the costly repair cost.

Step 1:- Completely Shut Down your System

Before you move further, first ensure that your heating system is turned off completely. Hence, switch off the fuel/boiler electrical power and fuel supply. This way, you can protect yourself and perform any heating system maintenance and repair.

As per JetAirCo Gas Furnace Repair Services, you will see the electrical power switch at the top of the cellar stairs or the bottom. Locating it will be easy as the electrical power switch comes with bright red color light.

Step 2:- Take Out Loosen Particles & Carbon Soot

After successfully turning off the heating system, you should take out loose particles and debris from the heating system’s combustion chamber. Remember that the procedure might take some time; however, you need to repeat the step until you completely remove carbon dioxide, water vapor, carbon soot, and other debris from the combustion chamber.

Cleaning the heating system combustion chamber will stop debris build-up on the chamber wall or any other area.

Step 3:- Inspect the Flue Pipe

To make sure your heating system’s combustion products exit from your place correctly, give special attention to the flue pipes. Besides, with It, you will quickly determine any leaks, holes, or cracks.

Hence, thoroughly inspect the flue pipe. Precisely where the lines meet the heating system. In case you experience a small leak or hole, you can wrap it with foil tape for a temporary solution. However, large leaks or holes require professional experts such as JetAirCo Heating System Repair Services.

Step 4:- Change the Oil Filter

Have you remembered when you last replace the oil filter of your heating system? No? Then instantly purchase a new oil filter and replace it with the existing one. Remember that replacing the oil filter ensures that your system will operate at its peak efficiency and prevent short pollutants from clogging the oil-burner nozzle.

Step 5:- Change the Air Filter

Once you have successfully replaced the oil filter, it’s time to consider the air filter. However, before you change the air filter, be sure you brought the perfect air filter for your heating system. Keep in mind; every air filter is unique; hence it’s crucial to choose the right one that will adequately fit your heating system. We advise you to change the air filter; it’s always better to hire a professional expert and let them perform the task on your behalf.

Step 6:- Test the Burner Efficiency

By testing the burner efficiency, you will understand the boiler’s soot level and boiler’s draft pressure.

In order to measure the boiler efficiency, simply put a probe within the exhaust flue to extract the gas sample. Then, with a thermocouple, you can easily calculate the boiler efficiency.

 Conclusion

We have full faith that you can perform the Heating Installation & Repair on your own. However, where is the harm to hire the Best Heating Repair Services for your purpose? Besides, the heating system operates at a high temperature. Hence, if, without taking necessary precautions, you want to do this on your own, you might put yourself at big risk. Henceforth, opt for the assistance of JetAirCo Furnace & Boiler Installation, Maintenance, and Repair service center. Grab our help if you stay near Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA

Your heating system is one of the most crucial components for adjusting a comfortable temperature inside your home. When you have an effective heating system, your life will be much easier and bring comfort to your home infrastructure.

Sitting inside of a hot home in the middle of the summer can be more than unbearable. Besides, it’s also bad for your health. As per the World Health Organization, the temperature inside your house shouldn’t increase above 78 degrees if you wish to avoid the possible health risks that can come along with the summer’s appearance.

Hence, if your house seems too hot this summer, it indicates that you need to have heating system repair done instantly and maintain a comfortable temperature within your house.

Signs your Place Might Require Heating System Repair:

Identifying, whether your heating system needs repairs or not, isn’t rocket science. However, it will be challenging for the normal homeowner to identify a flaw in the heating system. Remember that most of these signs are hidden and can be easily overlooked. These are the top 5 signs that indicate your heating system needs repairs instantly.

1.   High Utility Bills:

When your utility bills increase beyond your imagination, then possibly your heating system is the culprit. Besides, if your gas bills increase suddenly,  it could be because of your heating system.

With time, your heating system becomes less efficient and reduces efficiency. This means your system might take longer to provide your house the right temperature. Hence, check the last 3-4 months bills, and if you found that bills increase drastically, then it’s the perfect time to call a professional technician to repair your system.

2.   Burner Flame Turns Yellow:

We hope you notice that your heating system comes with a blue gas burner flame. If the burner flame suddenly turns yellow, it indicates that something happens wrong with your heating system. A yellow flame indicates the carbon monoxide present in your house. Carbon monoxide gas is very dangerous-especially for your children and pets. Therefore, when you see the furnace flame turning yellow, stop using your system and instantly contact a heating system service provider.

3.   Hear Unwanted Noise from your System:

Do you ever hear unwanted noise from your heating system whenever you want to start it? If yes, that’s not a good sign. It indicates there’s something wrong inside your system that’s causing this noise, and you have to call a technician to come and stop this unwanted sound.

4.   Thermostat Fluctuate Constantly:

If you have to adjust the thermostat too many times, it means something happens wrong. Also sometimes you might face difficulties adjusting some rooms temperature. Unfortunately, if you cannot adjust the thermostat after several attempts, leave the thermostat and pay attention to your heating system. There’s a possibility that the system might not equally distribute temperature to every room and due to this some room feels hot and others a bit cold.

You should quickly address the problem in order to prevent things from getting worse.

5.   Age of your System:

Like other appliances, a heating system also offers its service for a certain period of time. Generally, you can use your heating system for 7 to 8 years. However, if you maintain it well, the longevity can be up to 10 years. Not more than that.

Also, a pilot light is an amazing way to notify whether your heating system is old. If your system contains a pilot light, it means you use an old heating system. If this is the circumstance, then replacing your heating system with a new one will always be fruitful for you.

Grab the Best heating System Repair Service with JetAirCo

We hope till now you have understood the possible signs of heating system replacement. Looking for the best heating system repair service in  Hauppauge, Smithtown, Northport, and Long Island, New York? Your search can be ended with JetAirCo. By providing quality services to our customers, we acquire a strong reputation in the same field. Rely upon us and enjoy this summer with an effective heating system.

The solar heating system has come up with many benefits for saving your energy consumption cost, which is the prime thing for having a heating system. But, you cannot install a solar heating system as easily as you can install other types of systems. You need permission from your local authorities and neighbors. You are even asked to follow the building code for the installation. JetAirCo has been one of the old heating system repair service providers in New York. Although we have handled different heating systems, we are popular for furnace and boiler installation, heat pump services, and more. If you are not satisfied with your HVAC systems, you will get us by your side. Contact us to know more.

Here, we have discussed the things you need to complete beforehand for installing your solar heating system.

Due to the complex process, some households change their thoughts and opt for the regular ones for their comfort and luxury. Remember that a solar heating system is not only good for your saving but also the best option for nature and the environment. It uses renewable energy to heat your house.

You need to investigate your local building codes, zoning ordinances, and other special regulations attached to it. Obtain a building permit if you want to install the heating system on an existing building.

Many a time, community and municipality area impose some rules for installing the system. You may go through the tough process of obtaining permission. The installation is mainly a local issue, and you need to find a legal way to get this job done.

We are experienced in the field, and we want to make you aware of all the problems that you may experience with your solar heating system installation. Building codes are the most crucial thing in this case, and the common problems associated with it are:

  1. Exceeding roof load
  2. Wrong wiring
  3. Unacceptable heat exchangers
  4. Tampering with potable water supplies

You can consider special area regulations, including the local community, subdivisions, and homeowner’s association agreement. The best thing that you can do to avoid any legal issues is to contact your local jurisdiction’s zoning and building enforcement divisions and homeowner’s association.

You can contact us for your heating system installation process. We offer a wide range of services for your home heating systems. We offer gas furnace repair service, oil burner repair service, and other services for maintaining your systems.

You can contact us for more details. We have a main branch in Long Island, New York. But, we serve in other areas also, including Smithtown, Northport, and more.

If your heating system does not work properly, you need a heating system repair service to fix the issue immediately. JetAirCo is a renowned service provider that offers heating services in Hauppauge, Smithtown, Northport, and in more areas of New York. If your heating system is old and you need replacement, you can contact us to get details about different systems and the one that meets your requirement. We describe the seven types of heating systems here to give you knowledge about your home heating. They are available in different sizes and models to meet your demands.

Furnace:

A furnace is the most common type of heating system. It distributed forced, heated air to warm your environment. The air passes through the ducts, and the radiator distributes the air inside your house. A furnace can run on electricity, propane gas, or oil.

Boiler:

Boilers heat your room temperature by hot water or steam, which travels through the pipe to keep you warm. You can manage the zone heating system with your boilers.

Heat pumps:

Heat pumps can work as a heater and a conditioner. The system generally transfers heat instead of generating heat. When it comes to saving energy costs, this type of heating system meets your requirement.

Hybrid heating:

The hybrid heating system is as energy efficient as a heat pump and as powerful as a gas furnace. This system can be used for heating or cooling your home. Since the system works for both heating and cooling, you can also reduce the maintenance charge.

Ductless mini-splits:

You can create a separate HVAC zone with a separate thermostat. This is very useful for a large home, and it can also heat a room without a duct.

Radiant heating:

Radiant heating warms your house by sending hot water through the pipes installed on the floor. This type of heating system needs costly repairing.

Baseboard heaters:

It works as a supplement heating or add-on heating. They come at an affordable price, and you will get mainly two options in the market – electric and hydronic.

The heating system offers you many benefits for your home heating. But, repairing always needs a professional. You cannot handle the technical parts on your own. JetAirCo has been a renowned name for offering heating services in Hauppauge and other parts of New York. We have served many houses and industries. Our experienced team will carry out the job with fineness. Get the best benefits for your heating system at JetAirCo. We offer HVAC services in Hauppauge, Smithtown, Northport, and other parts of New York. Contact us to get more details. 

If your heating system stops suddenly on the coldest day, it puts you worried. This situation is no less fearful than a nightmare. If you want your heating system to work seamlessly in the winter season, invest your time in its maintenance. JetAirCo is a renowned heating system installation and repair service provider in Hauppauge, Smithtown, North Port, and in other areas of New York. You can call us for the maintenance of your heating system.

If you don’t want to experience a sudden breakdown of your system, pay attention to your heating system’s maintenance. Ensure that every part of your system runs perfectly for your comfort. Here are some tips that you can follow for your heating system.

Schedule your maintenance annually:

Like every machine, your heating system also needs maintenance. Our experienced heating system professionals will visit your place and check your systems thoroughly. We check every technical part inside and outside of your system. We aim at making your system efficient enough that it works perfectly in the peak demands. We are offering the best heating repair services in Hauppauge, Smithtown, Northport, and more.

Check smoke alarms and carbon monoxide detectors:

You ignore these two things always. But, they are an important part of your heating systems. For your safety, you need to check your smoke alarms and carbon monoxide detectors. Check the batteries and ensure that they are working perfectly.

Change the air filters:

Air filter maintenance helps you improve the air quality inside your house. A clogged filter can damage your heating system because it overheats your heating system. Besides, it distributes poor air inside your house, keeping your health at risk. So, check your filters and clean or replace them as per your needs.

Check your thermostats:

Your thermostat regulates the temperature. If it is not working well, you will not get the desired heat for your comfort. Turn on heating mode and increase the temperature on your thermostat to ensure that it is working well. Sometimes, expired batteries are the reason for your heating system failure. If you want to enhance your heating system’s efficiency, you can install a programmable or smart thermostat that helps your heating system produce heat according to your needs.

Hire an experienced professional:

Your heating system always needs an experienced professional to maintain it. Check the services your provider offers and research about your company. JetAirCo is an experienced name for your heating system maintenance in Smithtown, Northport, Hauppauge, and in more areas of New York. Contact us to know more about our services. Our branch is located in Long Island, New York.

Choosing the right size of a boiler is important when it comes to your comfort and luxury. Call a professional to guide you since you are not aware of different parts of the boilers. JetAirCo is an experienced name that understands different types of heating systems and they can guide you to buy the most needed system for your home. Since it is an investment, you must consult a professional for this. The company is offering oil furnace and boiler furnace repair services in Hauppauge, Smithtown, Northport, and more.

Heating size matters a lot to offer you a comfortable environment. The system heats the temperature when the outside air remains cold. Here, the size of the boiler does not talk about the physical size of it; rather it defines the power of the unit that is known as the output rating.

The output rating of a boiler is measured with the kilowatts (kW) unit. If you have a too big size, it increases energy consumption and leads to the wastage of fuel. A too-small boiler will not provide you with a comfortable temperature.

If you are confused about which boiler size fits your house, you can contact us. JetAirCo has a branch in Long Island but is a popular name in areas like Hauppauge, Smithtown, Northport, and in more areas.  Hire our boiler installer in Hauppauge.

You can seek help from an expert for your boiler system. But knowing different types will help you make the right decision even more prominently.

There are types of boilers are common in the market and they are:

  1. Combi Boilers
  2. System Boilers
  3. Regular Boilers

Combi boilers:

Combi boilers are a single unit and it is perfect for the small to medium size homes with one or two bathrooms. It is the most cost-effective solution for your home. It offers the central heating and hot water supply as per your demands. It does not need an additional tank or cylinder that saves space in your house.

System Boilers:

System boilers are similar to combi boilers that get water from the mains. They provide a heating system along with storing domestic hot water in a cylinder. It does not need additional space for the cylinder, although.

Regular boiler:

A regular boiler is the oldest heating system and this type of heating system is found in the traditional properties. It comes up with an extension tank and a cylinder.

These are the common types of heating system you have. Consult with JetAirCo and choose the right quality heating boiler for your house. When it comes to size, you need an expert to pick the right size. Find out the best solution from JetAirCo. Get the best boiler service in Northport and in other areas of New York. Call our service.  

Your heating system can make noise because of the scientific reason for metal contract and expand. But, users sometimes feel that the noise gets louder, and it signifies a different cause that needs to be fixed immediately. If you hear any unwanted noise from your heating system that seems a bit different from the natural sounds it makes, you must call a professional. Call a heating system service provider near you, and let the professional fix the issue. JetAirCo is a name in New York for offering trusted services for the HVAC systems. They will visit your place and fix the heating related problems easily. The company is active in Smithtown, Northport, and Long Island areas.

If your heating system causes sounds like gurgling, tapping, humming, creaking, and clicking, your heating system needs a touch of professional who can better solve the issue than you do. A technical person can easily detect the problem and solve it.

Since a heating system is made of metal, it contracts and expands because of the heat. You can hear the noise of it, naturally. This sound has nothing to worry about. But, when you start hearing odd noises from your heating system, don’t waste your time and immediately call an experienced HVAC service provider.

If you are using a boiler for your heating system, then the gurgling sound is very common. But, when the sound gets louder, this denotes underlying faults. You can check your boiler and can make some adjustments.

A conventional heating system has an F&E heating tank, and it causes a noise when it is dry and draws air in the system. You can easily fix the issue on your own by checking the ball valve. If the valve gets stuck in the lifted position, you can move it up and down to restore the water flow in the tank. If you still have the same issue, it needs professional help. Contact JetAirCo and solve the issue immediately. We have a branch in Long Island, New York. But, we are active in areas like Smithtown, Northport, Hauppauge, and more.

The boiler may produce a noise like a kettle boiling and it indicates the limescale build-up in the boiler’s heat exchanger. This interrupts the water flow and water in the heat exchanger gets too hot. When the hot water comes to the temperature of boiling, it makes the sound similar to the whistling kettle. If you have an older heating system, this problem is common. You can remove the limescale through the descaler added to the feed and expansion tank. Clean your system by flushing clean water into the systems.

To keep your heating system protected from the limescale build-up, install a water softener near the main water supply. It transforms the hard water particles into the safe sodium particles that do not cause future build-up.

JetAirCo is an experienced name for your heating system. Years of knowledge make professionals experienced enough to handle any tricky situation with your heating system. If you are not aware of the technical parts, you can leave this fixing on us. We are helping households in Hauppauge, Smithtown, and Northport.