Whether you realize it or not, the air ductwork plays a vital role in keeping your home chilly during the hot days and warm in the winter. Besides, air ductwork connects with the heating system and circulates fresh air to every corner of your home. However, millions of homeowners have duct leaks in their system, and it might end up with high repairing bills. Fortunately, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, you can hire JetAirCo Heating Repair service and seal air ductwork instantly. Continue reading the blog as we will disclose the best strategies to seal the air ductwork.

Duct Sealing Procedure :

If you believe you have leaky air ductwork, there are a few different duct sealing methods that you can apply. Let’s go through them in detail.

1. Duct Sealing Tape:

One of the simplest ways to seal leaky ductwork is to use HVAC duct sealing tape. It’s also known as aluminum foil tape. The duct sealing tape comes with a roll and can be found in every hardware store. This duct sealing method takes less time and is inexpensive. However, duct sealing tape is not lasting much compared to other selling methods. Besides, this sealing tape method is quite tricky. Therefore, we advise you to hire JetAirCo HVAC Service and allow us to seal the leaky ductwork. As per Underwriters Laboratory, the duct sealing tape is suitable for residential use air ductwork. Also, this type of taps isn’t smoke-related and prevents fire accidents.

2. Mastic Sealing Tape:

As said earlier, duct sealing tape seems to be more costly and less durable in the long run. As an alternative, homeowners might search for a reliable choice- mastic sealing tape. As per JetAirCo, water-based mastic-sealing will be the best option to seal leaky ductwork as it tightly holds the air ductwork for the longest time. Keep in mind, never get mastic sealing tape confused with duct seal. A duct seal is mainly utilized to seal the electrical wires surrounding the outside of your home. Also, depending on the leak size, you might need to stir the liquid mastic seal with other products—for example, fiberglass mesh tape. However, the best option will be to hire JetAirCo Heating Systems Maintenance Services and hand over your task within our shoulders.

 Advantages of Duct Sealing

A properly sealed air ductwork can make your place more comfortable, safer, and efficient. Besides, you will get the following benefits if you hire JetAirCo Heating Maintenance service and seal your air ductwork with us.

1. Indoor Air Quality:

Insulation particles, garden chemicals, and other loose particles can enter your house through leaky ductwork. As a result, your family members might suffer from aggravating asthma and allergy problems. Fortunately, sealing air ductwork can reduce the risk of pollutants entering ducts and increase indoor air quality.

2. Save Money:

A reliable contractor like JetAirCo Heating System Maintenance can increase the system energy efficiency up to 30 percent. Sealing air ductwork can lower your energy bills and increase overall efficiency. Besides, if you are looking to install a new heating system, a sealed air duct system can help you in several ways.

3. Protect the Environment:

Sometimes, the energy used in our house comes from the burning of fossil fuel, which often leads to acid rain, smog, and climate change. However, by reducing the air ductwork, you can reduce the energy amount and create an eco-friendly environment inside your house.

Final Thoughts

As discussed earlier, air ductwork plays a crucial role in making your residence comfortable. However, it’s necessary to seal the air duct properly; else, you might suffer from different physical discomforts, including allergy and asthma. So, if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York, we request you contact JetAirCo Heating Repairs Service and take our assistance.

Despite the way that we’re simply a month into the fall season, an ever-increasing number of mortgage holders are starting to set up their homes for winter to guarantee that they stay warm and agreeable all through the season. Regularly, they do this by supplanting their material frameworks or even their windows. Undoubtedly, these are good choices. However, do you know furnace maintenance tips can also keep your place comfortable?

Remember that experts suggest that you don’t just turn on your furnace in the winter months. This is because your heating system remains idle for a couple of months. Hence, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Services and after that activate your furnace system.

Things You Should Perform Before Turning on Your Furnace System:

In the undermentioned section, JetAirCo listed six crucial aspects you must consider before turning on your furnace during the winter months.

1. Check the Filters:

Before you activate your heating system, you must thoroughly check out the air filter. Keep in mind; you haven’t used your furnace for months. Hence, there’s a considerable possibility that dirt and lose particles might gather within your furnace. If you notice a dirty air filter, give JetAirCo Furnaces and Boilers Service a call and replace the clogged air filter before you use the furnace. A dirty air filter can reduce the indoor air quality as well as negatively affect your family member’s health, especially if you have children and senior citizens at home.

2. Be Sure that the Thermostat Works Correctly:

As per a 2018 survey, the thermostat can affect the furnace’s efficiency. Less efficiency means you might end up with higher energy bills. So, hire JetAirCo Gas Furnace Repair Services, and ensure that the thermostat works smoothly before using your furnace heating system. 

3. Search for Drafty Place:

Apart from checking the thermostat settings and air filter, you should search for drafty areas in your house. While doing this, you need to check your windows and doors. Keep in mind; if your windows and doors get damaged, air might escape from these places.  As a result, your furnace will take longer to make your place warm. Therefore, if you notice a draft in your house due to damaged doors and windows, instantly call JetAirCo Heating Systems Services and repair or replace them to prevent air from escaping.

4. Test Carbon Monoxide Detectors:

As per JetAirCo professional, it’s not just the thermostat you inspect before turning on your furnace; you should also see the carbon monoxide detectors to ensure that it still works properly. It’s an essential step as a damaged furnace can create toxic carbon monoxide gas into your house. Therefore, check your carbon monoxide detector thoroughly before turning on the furnace system in winter. However, if you don’t have sufficient time, hire JetAirCo Furnace Repair Services and resolve all your queries at the earliest time.

5. Remove Particles Placed Near the Furnace:

Before you activate your furnace for the winter months, ensure to take out items that are placed near your heating system. These particles often include furniture, old clothing, or any other loose particles. Hence, inspect every area surrounding your furnace and keep them away to a safe place. Besides, ensure that items don’t block the air vents and air ductwork as these might prevent air from circulating in your house.

6. Note Issues Experienced by your Furnace:

While inspecting your furnace heating system, it’s highly recommended to do an overall checking of the furnace unit. Also, when you perform this, take note of the common issues that your furnace system might experience. For example, you might hear unwanted sounds from your heating system, the furnace suddenly stops responding, and many others. If these problems arise, instantly call JetAirCo Heating Systems Maintenance Services to ensure your furnace’s peak performance.

Conclusion

So, if you search for someone who can assist you in maintaining and repairing your furnace at a pocket-friendly price, give JetAirCo  Furnace Repair Services a chance to become your service partner. Our humble request is to contact us if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York.

Do you know that because of a clogged air duct, 25% to 30% of the lost air in your HVAC system? Yes, It’s true and, you might end up with high utility bills. Fortunately, there are lots of remedies to this issue. If you stay in Hauppauge, Smithtown, Northport, and Long Island, New York, the best thing you can do is to hire JetAirCo Heating Repair service.

Now, the question is why air ductwork is so important and when you will realize that it’s time to clean the air ductwork and hire a professional service provider? Well, keep reading the rest of the blog and resolve all your quarries.

 Importance of HVAC Air Ductwork

Many times when people inspect their HVAC system, they often overlook the air ductwork. Remember that it can be a costly mistake as air ductwork circulates hot/cold air to each corner of your house.

In case there are many holes in your air ductwork, your system will lose its air pressure. Also, you will have to put extra pressure to operate your HVAC system. Air ducts are made from a material combination, including plastic and fiberglass, and you can use air ducts for up to 15 years.

However, over time the air ductwork gets damaged. Whenever you notice something happens wrong with the air duct, immediately hire JetAirCo Heating Systems Maintenance Services.

Signs It’s Time for Air Duct Replacement

if you experienced any of the given issues, it’s time to replace the air duct and hire JetAirCo Heating Systems Services.

1. High Energy Bills:

It’s quite normal that the air duct will release some air. However, if more than 25% of air release through the air duct it will significantly increase the energy bills. Many times, you might set the thermostat set to a certain level to warm your place. As a result, the indoor temperature might get higher, but lots of air will be escaping. It might even prevent your HVAC system from responding. Hence, if ever the situation occurs, give a call to the JetAirCo Heating Maintenance service, and within a half-an-hour, our technician will be at your doorstep.

2. Uneven Heating and Cooling:

If you are a homeowner, you might notice that one or more room in the house is improperly cooled or warmed than the other areas of your home. Faulty air ductwork can be the reason behind it. Sometimes, if there’s a leak developed in the air duct, the indoor temperature might vary. So, call JetAirCo Heating Systems Services and allow our technician to identify and fix the air ductwork leak.

3. Hear Unwanted Noise:

While operating, you might hear sound from your HVAC system– it’s normal. However, if you notice that the air ductwork vibrates too much, it indicates you need to inspect the air ductworks thoroughly.

 Bear in mind, via plastic or fiberglass joints; the air ducts are connected to your house. In case these joints get damaged, you might hear rattling or whistling sounds from your HVAC system. Occasionally, holes in the ductwork will prevent air circulation, and you hear unwanted sounds from your system. If it happens, immediately call JetAirCo Heating System Maintenance and replace the air ductworks.

4. Smelling Mildew and Mold in your Home:

having a dirty or clogged air duct means there’s a possibility of mold and mildew build-up. When mold and mildew grow, you will get an uneven temperature inside your home. Also, if you continuously neglect the problem, then after a few weeks or one month, you will smell mold and mildew when the air will enter your house through air vents. In this circumstance, hire JetAirCo Heating Service and get rid of the issue at the earliest time.

Conclusion

Whether you want to install air ductwork or replace it, try JetAirCo Heating Installation Maintenance Repair Service if you stay in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York. Please stay with us and achieve everything that you want with your HVAC system.

When your heating system stops responding, you might pick up your phone and call your Heating Systems Maintenance Services to repair your system. Undoubtedly, it’s a good choice, especially if you live in Hauppauge, Smithtown, Northport, and Long Island, located in New York, and opt for JetAirCo Heating System Repair Services. However, do you know specific tasks you can perform on your own and save unnecessary repairing costs?

Yes, being a professional expert in the industry, millions of people call JetAirCo and resolve issues independently. In this guide, we will explain seven things you must cross-check before hiring a professional expert.

However, if you feel uncomfortable checking these things, you must call technicians and hand over your tasks.

1.  Inspect Thermostat:

The foremost thing you must check before calling your Heating Systems Service provider. Be sure that you set your thermostat to the temperature recommended by manufacturers. You might don’t believe it, but technicians can often fix the problem by simply adjusting the thermostat to its desired settings. Many times, homeowners didn’t turn on the selector switch, and as a result, they will be unable to set the required temperature.

Hence, before you hire a professional expert, always cross-check and ensure that you have correctly set the desired temperature as well as adequately set the selector switch. Unfortunately, if the thermostat has no display, you don’t have any other options rather than calling the JetAirCo Heating System Repair Services.

2. Clean Filters:

Be sure that you use a clean air filter. Many homeowners inform JetAirCo that they use a dirty air filter, and due to this, their heating system stops responding. However, after changing the air filter, they smoothly operate the heating system. Hence, before opting for Heating Systems Services, double-check that you have a neat & clean air filter.

3. Fuel Supply:

In case you use a gas furnace, then ensure that the gas service hasn’t been stopped. Often, manufacturers deactivate the gas service because of the risks of the development of a leak. And sometimes it might create a problem for your heating system. Therefore, see the fuel supply and be sure that the gas service is activated. However, it will be a risky task for you if you don’t have sufficient knowledge; hence be on the safe side and hire JetAirCo Heating Systems Maintenance Services to perform your task in the most effective way.

4. Pilot Lights:

In case you are using an older gas furnace or water heater, be sure that the pilot light is in a lit state. Else, you might suffer from numerous heating system errors.

On the other hand, if you use an electric furnace heating system, inspect the flash codes are set correctly. However, the best way to deal with the situation is to call a professional technician such as JetAirCo.

5. Check Air Vents:

For any heating system, air vents are the most sensitive components. Hence during the heating system troubleshooting, it will be compulsory to inspect air ducts, vents, blockages and ensure that no blockage can lead to factors of abnormal airflow. Unfortunately, if the error still persists after doing so, don’t waste a single moment and seek professional assistance.

6.  Check Outside Unit:

We hope you might know that through the outside unit, airflow will enter your house.  Often, debris, including branches and leaves, might gather over the outdoor unit, and as a result, it might stop airflow. Therefore, it’s highly recommended to inspect the outdoor unit from top to bottom and remove debris, and other loose particles at least once a month.

7. Power Outages:

Before you hire a reliable, professional expert such as JetAirCo, it’s necessary to check the power outages. Many times, it’s the culprit for irregular airflow. Hence, inspect the power outages and after that call out a technician.

Bottom Lines

You can apply the above tactics to prevent unnecessary repairing costs. However, if you don’t know how to attempt these tips appropriately, things might go against you. Hence, don’t take any risks and contact JetAirCo Maintenance Repair Service and avail of our services at a pocket-friendly price if you stay near Hauppauge, Smithtown, Northport, and Long Island, located in New York.

We all love the idea of staying indoors, feel comfortable during the winter’s days. Thanks to our heating system, it will provide us with warm air even in the middle of the winter months.

However, many homeowners claim that they might have to pay a massive amount of electric bills at the end of the month. Are you one of them? Then get in touch with JetAirCo Heating Systems Maintenance services if you live near Hauppauge, Smithtown, Northport, and Long Island, located in New York. 

Besides, JetAirCo professionals also come with some Heating System Maintenance tips that will help you reduce your monthly electric bills and enjoy the winter season without any hassle.

Pocket-Friendly Strategies to Cut Down Heating System’s Electric Bill

If you notice that you have to spend an excessive amount of energy bills, you can instantly rely upon JetAirCo Heating System Repair services. Besides, we advise you to thoroughly check out the guide till the end, as this passage brings something fruitful for you.

Close the Available Rooms:

 Most of us have some extra rooms at our house. JetAirCo suggests that when you turn on your heating system, you must close all the unused rooms. Else, you might end up with high electricity bills. We also advise you to close all the air vents of the unused rooms. So the hot air from the air ducts cannot travel through them. You can use a draft blocker or a towel to block these air vents. Unfortunately, if nothing happens after doing so, consult with JetAirCo Heating Installation & Repair service center.

Adjusting the Thermostat Temperature:

Experts believe that adjusting the thermostat can significantly reduce the electric bills of your heating system. JetAirCo thinks that if you lower the thermostat temperature up to 9 degrees, you can even save up to 9% to 10 % annually on heating.  Before going to sleep and before leaving for the office will be the perfect time to adjust the thermostat’s temperature.  Set up the temperature at 64 degrees Fahrenheit will consider as the ideal temperature to cut down monthly electric bills. However, when you leave for work and if nobody is present at your home, you can set the thermostat temperature below 64 degrees Fahrenheit.

Be Sure Windows & Doors are Tightly Closed

Always remember if you haven’t tightly sealed your doors and windows, then your place might lose heat via these. Hence, before the winter months, it’s crucial to inspect all the windows and doors and ensure no leaks. Sometimes, you might experience cold air from the bottom of doors or the sides of windows. In such a circumstance, quickly close them tightly. After doing so, your heating system can easily circulate warm air throughout your home. In this way, you can deduce the monthly electric bills.

Use Ceiling Fans:

Confused and thinks, what’s the role of ceiling fans in the cold days? As per JetAirCo Heating Service, if you have ceiling fans in your rooms, turn them on and let them distribute hot airs throughout your residence. It’s another effective tactic that you can opt for to cut down your monthly energy bills.

Bottom Lines

We believe with these tactics; you can reduce the monthly electric bills of your heating system. However, if you don’t have much time to look at your heating system and stay near Hauppauge, Smithtown, Northport, and Long Island, located in New York, simply contact JetAirCo Heating System Installation, Maintenance, Repair service center.

All homeowners must know a bit about their heating system. For instance, homeowners must have a few heating system repair tips at their hands. Like, you must be aware of the fact that you should repair or replace your heating system before the winter months.

 Also, regularly inspecting your heating system will make it possible to detect minor issues and fix them before the winter months.

Here, JetAirCo’s heating repair service experts discussed some of the crucial aspects that every homeowner must understand. If you want to install, well maintain, or repair your heating system in the regions of Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA. Contact JetAirCo. Rely upon us and get the best service at pocket-friendly prices.

Top Heating Repair Issue you might deal with:

Here, JetAirCo Heating Systems Maintenance Services provides some common heating system repair issues that homeowners might experience.

Damaged Blower Belt:

In case the blower belt in your heating system gets damaged, it will emit high noise. A reliable Heating System Service like JetAirCo is required to fix the issue.

Damaged Ball Bearing:

While turning on your heating system, if you hear a scraping sound, there’s a possibility that the ball bearing gets damaged. When this happens, a professional technician such as JetAirCo can be your ultimate choice.

Heat Exchanger is Damaged:

If you notice a strange odor around the heating system or your residence has a peculiar smell, a cracked or damaged exchanger can be the culprit. If this happens, be sure to call a Heating Installation & Repair service instantly.

Rapid Cycling:

In case your heating system frequently turns on and off itself, it probably happens because of the thermostat. Besides, a clogged or dirty air filter can lead to this problem. Unfortunately, if you cannot identify the root cause of the problem, call out a professional technician, like JetAirCo.

Yellow Pilot Light:

 In case your heating system comes with a pilot light, you might notice that it always produces a blue flame along with a small yellow tip. However, if you see that most of the flame is yellow, it indicates there’s carbon monoxide present. Immediately, schedule a Heating Repairs service.

Bear in mind; a heating system generally operates at high temperatures. Hence if you encounter a serious issue with your heating system, be on the safe side and instantly contact a reliable service provider such as JetAirCo.

When to Replace the Heating System?

You can repair most of your heating system’s components with JetAirCo. However, certain aspects indicate you don’t have any other option left rather than replacing your heating system. These are the points that help you to understand it’s the perfect time to replace your system.

Your heating system is too old:

Do you use your heating system for more than ten years? If so, then repairing costs might be higher than buying a new system. In this circumstance, replacing the heating system will be the best option for you.

Lack of energy efficiency:

If you notice a significant increase in your electricity bills, replace your old heating system with a new one despite timely maintenance.

Extend your Heating System Lifecycle with JetAirCo

No matter what system you pick up for your purpose, you can add years to its lifecycle by regularly servicing, maintaining, and repairing it by a reliable professional. JetAirCo heating system Installation Maintenance and Repair service can fulfill all your requirements and ensure that your system works at its peak efficiency. Hence, if you stay in the area of Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA, install or repair your heating system with JetAirCo.

If you want uninterrupted heating during the winter season, you must pay attention to the heating system maintenance before the arrival of freezing time. Your HVAC systems always require a professional analysis because they can check the facts better than you can. You can call JetAirCo offering heating system maintenance services in Smithtown, Northport, Long Island, and more. We come up with some easy tips that help you prepare your heating system for its performance in the winter.

JetAirCo is a trusted name for your HVAC system maintenance, and we are active in different parts of New York. If you want any suggestions to enhance your heating system’s performance, we are always ready to meet your demands.

System maintenance:

Annual system maintenance will take care of your system perfectly. Hire HVAC professionals who will check your systems to find out any errors. HVAC techs also believe that the no-maintenance is the only reason that causes a sudden breakdown of your system. You always need an HVAC expert for this service. They detect leaks and rotting, clean your heating system, check the controls, check the carbon monoxide leakage. Call us for the maintenance of your HVAC systems. We will also offer you some quick tips to maintain your system easily on your own. We have knowledge in handling different types of systems.

Clear the space around your furnace:

If you store anything near your furnace, clean the area to avoid any fire accidents. Check everything to ensure that your living is safe.

Pilot light:

If your system has a pilot light, it must always be lit. Ask your HVAC professionals about the maintenance of your system so that you can take better care of your house and the comfort.

Test your heat and thermostat:

When you switch on the heat, your system will start without any problem. Ensure that there is no delay in starting your system. your HVAC professionals will check things and ensure better performance of your system.

Seal leaks:

If you detect leaks, fix the issue immediately. You can check the areas around the windows, doors, pipes, attic areas to check the leaks. Insulate the areas, and you will definitely feel the difference.

Clean the air filter:

To enhance your heating system’s efficiency, you can clean the air filter of your system. it enhances the air quality also.

If you need any help with your heating system, contact JetAirCo and fix your problem immediately. You will get the best advice for your system. we have a branch in Long Island, New York. We offer Heating Systems Maintenance Services in Smithtown, North Port, and other areas of New York. For more information, visit us online.

Heat pumps are a common system that can offer you both heating and cooling. You can use the system in winter and summer also. But, a heat pump is not for extreme weather. The system will provide you enough heating and cooling if you live in moderate weather. Leaking in the heat pump is very common, and you can avoid the issue by maintaining your system properly. But, if your system develops a leak, you can leave the responsibility to the professionals. JetAirCo is offering Heating Systems Maintenance Services in Smithtown, Long Island, Northport, and other places of New York.

A heat pump has a reversing valve that changes the flow of refrigerant as per the need. It includes a complex process of heating and cooling because one system takes care of both conditions. Depending on your requirement, the heat pups either release heat inside or outside of your home.

Heat pump leaking does not cause an immediate situation. But when you start ignoring the issue, it causes water damage related problem in your house and in the system both. If your system has stagnant water, it damages the inner parts of the system. If you experience a short-circuit problem, it causes a big expense. So, here are some reasons that cause heating leakage.

Drain issue:

The problem is to drain the excess moisture. The condensate water collects in the condensate pan, and the water then drains away from your heating system, using the drain line. If your system gets clogged, it cannot send the moisture to the drain line. Instead, the system overflows the water. If the condensate pan is fixed correctly, it causes the leakage.

You can check your condensate pan on your own to find any blockage. But, finding mold in the system needs a professional service. JetAirCo is offering heating installation and repair in Hauppauge, Smithtown, Northport.

Dirty coils:

Cold evaporator coil collects the condensation from the indoor air and then drains it into the pan, which leads to another drain. If the coil gets clogged, it stops functioning and spills the water on the ground. To avoid this problem, you need to ensure that the coil gets often cleaned just like your air filter. Hire a heating system service provider to perform this task. JetAirCo has always been there to enhance your comfort level in all weathers. We have an experienced team that visits your place and analyzes the situation properly. Call us to know more.

Cracked overflow pan:

In the cooling process, your heat pump collects heat moisture from the indoor air and collects it on the overflow pan. If the pan gets cracked, the water drains.  You will experience a large amount of water pooling on the ground.

JetAirCo is offering the best services for your heating system. If you want any help from us, please contact us for more details.