As one of the costly & energy-hungry aspects of your house, your heating system needs careful installation, maintenance, and control in order to operate at the highest efficiency. Common Heating System installation mistakes lead to inefficiencies and unable to provide you with the desired temperature.

So if you are new in the heating system installation market, you probably want to know the best possible way to install the heating system without any hassle. Continue reading the guide as here we bring something unique for you.

Common Installation Mistakes and their Solutions :

Following are the mistakes the people make during the Heating system installation procedure. Let’s understand them one by one.

1.   Implementing a Poor Drainage System

If the drainage system hasn’t filtered properly, it creates a fairly substantial amount of moisture in the heating system operating. This can lead to backed-up pipes and even mold growth.

Unfortunately,  a poor drainage system is one of the most common heating systems installation mistakes. Hence, it will always be better to call a professional service provider and hand over the task to them. They will install the drainage system properly and make sure that everything is in its right place.

2.   Wrongly Installation of Thermostat

Many people don’t know that thermostat has a huge effect on the Heating system performance. However, improperly installing the thermostat is another common mistake that people make while installing their system. As a result, you have to put extra pressure to start your system.

Now you might think, what will be the ideal place to install the thermostat? The thermostat’s perfect location will be far away from the air vents and in a place where the sunlight hardly reaches. Remember that a properly installed thermostat will provide an accurate temperature.

3.   Inappropriately Sealing the Air Ducts

Improperly sealing the air ducts is another common mistake that most users made while trying to install the Heating system on their own. Always remember there should not be any cracks in the ductwork. Also, it would help if you closed up all the other cracks with a permanent sealer.

If you need any assistance, then immediately contact your local Heating system service provider. They will make sure that the air ducts are snugly secured in their position.

4.   Improperly Placing the Condenser

The condenser is the most crucial part of the heating system. The less it works, the more efficiently your system will run. Not only condenser save the optimal energy, but it increases the lifecycle of your system as well.

How to decrease strain on your Heating system? Regular clean it. Apart from this, you have to make sure that you put the condenser in the right place.

5.   Picking the Wrong Size Unit

Another common mistake people make when installing the heating system in their home or office. If your unit is small for your house, this will cause your system to work harder. As a result, you have to pay higher energy bills. On the other hand, if you select a big size unit, it means you spent unnecessary extra money.

There are multiple unit sizes available in the market, and you should pick up the one that matches your place’s need.

6.   Ignore the Air Flow

 If you wish to get your system’s peak performance, ensure that there is unrestricted airflow within the system. If the airflow becomes restricted or blocked, this can stain the system to a large degree and lost its ability to adjust your home temperature.

Therefore while planning for a heating system installation, give special attention to the airflow system and provide your family members with a friendly environment.

7.   Place Air Vents in Wrong Areas

The air vent’s location is important to the functionality of your heating system. If you install them in the wrong areas, you will struggle to get adequate airflow, and unfortunately, this is also a common mistake.

So how to avoid this mistake? Simple spread the air vents throughout your house and place them in areas where they won’t be wrapped up with other objects.

8.   Not Regularly Clean the Condenser

To run your system efficiently, the condenser needs to have at least 2 to 2.5 feet of clearance on each side. If you don’t do so, your system might break down completely.  Hence, keep this thing in mind and then start installing your heating system.

Want to Avoid these Common Mistakes? Contact us today

Heating system installation and maintenance mistakes can cost you hugely. Wist, to avoid huge expenses? If yes, we here at JetAirCo are the people you can rely upon. Our HVAC installation and maintenance service center is located in Hauppauge, Smithtown, Northport, and Long Island. We have installed countless heating systems over the years. Regardless of your heating system installation needs, our teams of dedicated professionals can accommodate you.

As the name says, space heaters can heat a single room or a small area. Whereas central heating heats different rooms of your house, space heaters have very limited use and are perfect for zone heating.  You have many options to fuel your heating systems, including electricity, natural gas, propane, fuel oil, and more. Portable heaters are mainly electric. The home heating system is a vast area, which includes different systems for heating the temperature of your house. Depending on the weather, climate, area, and preferences, you can buy a home heating system for your needs. You can also consult with a home heating system service provider near you. They are experts in the field and come up with the right solution that will meet your requirement perfectly.

Operation:

Space heaters can run on electricity or flammable fuel, such as natural gas, kerosene, propane, or wood. Electric space heaters are very common, and they come in different categories – convection heaters, infrared heaters, and heat pumps.

Convection heaters make the heating element hot by passing the electricity through it. The heating elements are made of metal or ceramic. Using convection, the system transfers heat to the air. Some systems use a fan to distribute the heat in a better way.

Infrared heaters also heat the conductive wire by passing electricity through it. It is mostly based on radiant heating, where hot wires warm the solid surface by emitting infrared rays. It does not warm the air directly.

Heat pumps do not produce heat; rather, it moves heat from outside to inside for warming the temperature. It cools down the temperature also by reversing the process.

Radiant heater:

It produces infrared radiation, which is easily absorbed by your skin before heating the air in the space. This type of heating system works perfectly for a poorly insulated home.

When you are using a heating system, safety is an unavoidable thing to consider. The space heater has the risk of fire, burns, and carbon monoxide poisoning.

You can follow some safety tips to keep your home environment safe and secure from any mishap.

Safety:

  1. Plug space heaters directly into the wall outlet instead of an extension cord.
  2. Check the plugs and cords to identify periodical damages.
  3. Keep the flammable material at least 3 feet away from the heater.
  4. Turn off your heater when you are away from home, or you are sleeping.

You can hire a heating expert to take care of your systems. They have wide knowledge in the area and will solve your problem quickly. JetAirCo is a coveted name for your heating system repair and maintenance. We have an experienced team who will visit your place and analyze the problem to figure out the right solution. If you live near Hauppauge, Smithtown, Northport, and Long Island areas, we can efficiently serve your demands. Please call us if you need urgent help with your HVAC systems.

If you are using a solar heating system, you can enjoy the benefits of energy-saving. There is talk everywhere about using renewable energy sources for your living. A solar heating system can be the best solution that heats the air inside your house and reduces the energy consumption bills. We want to make some important awareness for using the solar heating system. The installation plays a very crucial role. Consult JetAirCo and get the right solution for your heating system. We offer the best heating system service and installation In Hauppauge, Smithtown, Northport, and other areas.

When you select the right size for your heating system, you will get the best support. The solar heating system depends on many factors, including your area, climate, design of your house, and more. You will also experience many problems while installing a solar heating system because the homeowner association will not allow you to install your system anywhere you want.

The heating capacity completely relies on the climate and the efficiency of the collectors. You need an active heating system that offers you 40% to 80% of home heating needs.  If you have a system that offers less capacity than mentioned above, it will not provide any benefits.

A well-insulated house with passive solar heating does not require a big size system. Such houses need supplemental heat that can be produced by any type of heating system. You sometimes need back-up support when your heating system does not work properly. In this case, you can opt for the woodstove or the conventional central heating system for heating your house.

Controls for the solar heating system:

When it comes to controlling, this heating system has a more complex process compared to the other heating systems. They come up with the sensors, switches, or motors to operate your system perfectly. But, the thermostat is the main controller of the system. It checks the heating difference between the storage unit and the collectors.

The control of the system varies, depending on the model. These days, systems come up with microprocessors that optimize heat transfer and delivery. You can contact the best heating system service provider to get the best heating system. They will also help you in installation and the maintenance process.

The maintenance of the solar systems does not need a long process. In the rainy season, rainfall clears the dust and debris on your system. In the dry season, you can clean up your system. Clean your system two to four times per year. You can easily clean up your panels with a leaf blower or a quick spray.

If you want to learn more about your heating system, you can call us. JetAirCo is there to help you, no matter what system you have. We are active in areas like Northport, Hauppauge, Smithtown, and more. We have the main branch in Long Island, New York. Contact us for more details.

Your HVAC systems make your living comfortable and beautiful. But, when you have invested in the wrong system, it will make your experience disappointed. You may not get the right temperature, and your expenses go higher and higher every month. If you are not happy with your system, you can consult with an HVAC professional near you. They will guide you buy the right heating system for your work. JetAirCo can help you find the right answer for your heating system. We have been in the service for many years, and we offer HVAC service in Northport, Hauppauge, Smithtown, and more.

When you install the correct size, it benefits you in many ways. You will get proper functions and can cut down the energy cost also. When it comes to the comfort level, your product will offer you the best support.

Noise is another factor that your HVAC system makes. But, when you have the right size system, you can reduce the noise level also. The only way to know the right heating system for your house is by hiring an experienced heating system service provider. You can contact any name near you and have them by your side when planning for your system. We suggest you go for the experienced name because it needs the knowledge to analyze the heating system and installation.

Professionals do the measure in the square footage. Besides, other things are also important to know your system’s right size, and they are windows, insulation, and age of the home. Do not buy a too large system for your heating. It does not benefit you.

When you invest in the oversized furnace, it goes on and off frequently. This short cycle causes hot and cold spaces in your home. Besides, it causes too much noise which disturbs your peace.

Check the AFUE rating when buying a heating system. AFUE is Annual Fuel Utilization Efficiency. It measures the efficiency of your furnace. The minimum rating is 80%. But, you can opt for the higher efficiency rating also. The high-efficiency rating is between 90%-98%. Its upfront charges are higher, but you can save money in the long run.

Let a professional decide which option is the best for you. JetAirCo has always been there to meet your demands. You can contact us anytime to fix the HVAC issues. If you want the best heating system for your home, we are ready to serve your demands.

Heat pumps are a common system that can offer you both heating and cooling. You can use the system in winter and summer also. But, a heat pump is not for extreme weather. The system will provide you enough heating and cooling if you live in moderate weather. Leaking in the heat pump is very common, and you can avoid the issue by maintaining your system properly. But, if your system develops a leak, you can leave the responsibility to the professionals. JetAirCo is offering Heating Systems Maintenance Services in Smithtown, Long Island, Northport, and other places of New York.

A heat pump has a reversing valve that changes the flow of refrigerant as per the need. It includes a complex process of heating and cooling because one system takes care of both conditions. Depending on your requirement, the heat pups either release heat inside or outside of your home.

Heat pump leaking does not cause an immediate situation. But when you start ignoring the issue, it causes water damage related problem in your house and in the system both. If your system has stagnant water, it damages the inner parts of the system. If you experience a short-circuit problem, it causes a big expense. So, here are some reasons that cause heating leakage.

Drain issue:

The problem is to drain the excess moisture. The condensate water collects in the condensate pan, and the water then drains away from your heating system, using the drain line. If your system gets clogged, it cannot send the moisture to the drain line. Instead, the system overflows the water. If the condensate pan is fixed correctly, it causes the leakage.

You can check your condensate pan on your own to find any blockage. But, finding mold in the system needs a professional service. JetAirCo is offering heating installation and repair in Hauppauge, Smithtown, Northport.

Dirty coils:

Cold evaporator coil collects the condensation from the indoor air and then drains it into the pan, which leads to another drain. If the coil gets clogged, it stops functioning and spills the water on the ground. To avoid this problem, you need to ensure that the coil gets often cleaned just like your air filter. Hire a heating system service provider to perform this task. JetAirCo has always been there to enhance your comfort level in all weathers. We have an experienced team that visits your place and analyzes the situation properly. Call us to know more.

Cracked overflow pan:

In the cooling process, your heat pump collects heat moisture from the indoor air and collects it on the overflow pan. If the pan gets cracked, the water drains.  You will experience a large amount of water pooling on the ground.

JetAirCo is offering the best services for your heating system. If you want any help from us, please contact us for more details. 

Your heating system is one of the high sources of energy consumption in your house. But, when it comes to comfort, we are ready to bear this pinch in the pocket. But, if you get a constantly increasing energy bill, you need to follow a few tricks to improve your heating system’s efficiency. Here, we talk about some common tips that make you more aware of your heating system. Maintenance comes first to improve efficiency and cut down your energy cost. JetAirCo is offering heating services in Hauppauge, Smithtown, Northport, and other areas of New York.

If your heating system increases your expenses, the time has come to check a few things that can help you save money. Here, you will get important practices that allow you to use your heating system in the best way.

Lower the temperature:

If you go by the recommendation of the Department of Energy, set the temperature of your heating system to about 68-degree Fahrenheit. It will save you money, and you can bear this cost easily. When you are away from your home, you can lower the temperature down by 10-degree Fahrenheit. Do not shut down your system completely because it makes the environment cold, and your system will again work harder to raise the temperature. It increases energy consumption. If you think that your heating system does not provide enough heat as it did before, get the system checked by professionals. Hire a heating system service provider near you.

You can call JetAirCo for your heating system maintenance and repair in Northport, Smithtown, Hauppauge, and other areas. We have a team of experienced professionals who will do an in-depth analysis of your home environment.

The use of thermostat:

If you are using a heat pump for heating your home, you can avoid a programmable thermostat for regulating the temperature. In the summer, your heat pump works like an air conditioner. So, your thermostat can help you get the right temperature by saving energy and money. But, when you turn on your heat pump’s heating mode, your thermostat will not work perfectly. Your heating system may operate in-efficiently. If you have a heat pump, try to maintain a moderate temperature to make your heating system work perfectly.

We will be happy to help you in solving your queries. We are offering heating system services in Hauppauge, Smithtown, Northport, and more.

Here are a few things that you can consider for your heating system to cut down your energy cost. Insulate your house perfectly to keep the warm air inside your house. It keeps the air warm, which reduces pressure on your heating system. If you use a chimney, shut your chimney damper after your use to lock the warm air for your comfort. JetAirCo will always be ready to enhance your comfort level. If you plan to buy a heating system, you can contact us to choose the best one for your use. We offer heating system repair and maintenance service in Hauppauge, Smithtown, Northport, and other areas.

Noises from your heating system can be the sign of serious errors that need an immediate solution. There are many types of sound you can hear from your system and the content discusses the most common ones to make you aware of the issues with your HVAC systems. Remember that your heating system always needs an expert professional who has years of knowledge in the field. Contact JetAirCo and solve heating needs. In this blog, we discuss the noises and their reason. Contact JetAirCo and get an experienced service for your heating system.

You may get a strange noise from your central heating system. It can be like odd knocks, loud banging, gurgling, and more.

If you are using metal pipes, it can cause sounds like cracking, groaning, and gurgling. The obvious reason for it is that metal pipes expand when they heat up with the hot water. These pipes also rub with other surfaces (walls or flooring). You need to check your pipework to ensure that they are securely set and they cannot move. This can solve the problems.

Noise can be caused by the air in the system. You will get light tapping or clicking noises. You sometimes get the gurgling type of noise which is caused by the radiator that needs bleeding. You can solve the noise by opening the bleed valve so that excess air can be escaped. You must check that the radiator of the system heats up correctly. If not, air can be in your system and cause the same problem.

If you do not have any technical knowledge about your heating system, you must contact an experienced professional for solving the issue. JetAirCo is offering heating system repair and installation services in Hauppauge, Smithtown, Northport, and more.

When you get loud banging noises from the system, it can mean that your boiler’s thermostat is set too high. Set the thermostat low to find out – it helps you or not. If you still get the sound, call a heating system service provider.

Noise can be caused by the limestone build up in the pipes. You need a professional to clean up your pipes. Call JetAirCo and book your service. The company has a branch in Long Island, New York. You can visit the place to know more about the company. Call us and you will get a professional for your service.

Water hammering is another common sound that your system can cause. You must call a professional Service provider for your system repairing. It can be a serious issue. JetAirCo is a company for HVAC services. If you have problems with your heating and cooling system, call us and get a professional for repairing your service.   

A power flush is required when your central heating system builds sludge in it and you do not get enough heating for your comfort. Whenever you feel that our system is not working properly, you can opt for the power flush for your central heating system. But, if you are looking for the exact answer to the question, you can opt for the power flush for every 5 to 6 years. Consult with an experienced HVAC service like JetAirCo. The company has a branch in Long Island, New York.

What is a power flush?

A power flush is nothing but a process of cleaning your central heating system. It is done through circulating the high volume of forced water along with the cleaning agents for clearing the debris. Contact JetAirCo and let them handle this process. Experienced professionals are there to take care of your system.

Here, we come up with a set of questions that help you to decide when the right time is for power flush for your central heating.

If you have new radiators, you no need to do the power flush. But, if you feel cold spots on the radiator, it is a sign of corrosion or sludge in your systems. This sludge may travel to your radiator and causes a cold spot. In this case, you need to do power flushing your system.

When your radiator is less than 4 years old:

If your radiator is less than 4 years old and you have a mild steel radiator and you are living in the hard water area, you will experience the normal rate of corrosion.

But when you have a stainless steel radiator and experience cold spots on the bottom of the radiator, it shows you a sign of faults. You can also check the boiler or plumbing of your heating system. Sometimes, the cold spot can be caused by them also. Hire an experienced professional team for heating service.

JetAirCo is offering heating services in Hauppauge, Smithtown, Northport, and in other areas. Contact the professional team and start repairing your system. Professionals, there are experienced in handling different types of systems and they are well aware of both modern and traditional components of the heating and cooling system.

When you have a 5 years old radiator:

If your radiator is 5 years old, you can opt for the power flushing to maintain your system. But, you can need this process of cleaning for every 8 to 10 years and that too depends on the material used in your system.

How do you know your system needs power flushing?

You can feel the bottom of the radiator and if you find a cold spot, you can opt for the power flushing option. Contact JetAirCo and hire an experienced heating system service provider. We offer services in the area of Hauppauge, Smithtown, Northport, and more. Our main branch is located in Long Island, New York.