With radiant heating, the system sends heat to the floor, the panel, or the house’s ceiling. The system works on the radiant heat transfer by delivering heat from the hot surface to the people and the objects, using infrared radiation. When the system is on your floor, it is called radiant floor heating. If you want to know about the best heating system, you can contact JetAirCo. The company has a wide presence in New York and offers heating services in Hauppauge, Smithtown, Northport, and more.

Radiant floor heating benefits you in many ways. It is more efficient than a baseboard heating system and forced-air heating system as you can avoid duct losses. If people have allergic symptoms, they choose the radiant floor heating over the forced air system.

The hydronic system also uses little electricity and proves to be the best option in areas where electricity prices are very high. Besides, the system also uses a wide variety of energy resources, including standard gas or oil-fired boiler, wood-fired boilers, and more.

The radiant floor heating depends on the natural circulation of the heat in a room. The warm air rises higher from the floor, and the cold air is heated when it comes close to the hot surfaces. The radiant floor heating is different from radiant panel heating.

If you need any suggestion for your home heating system, JetAirCo has always been there to solve your queries. If you need heating system repairing and installation services, you will get a quick response from us since we know comfort is important for you. Call us to get more details about our heating services.

You will get three types of radiant floor heating – radiant air floors where the heat-carrying medium is the air, electric radiant floor, and hot water radiant floors. These types also get further categorization according to the installation process – wet installations, sandwiches, and dry installations.

Air-heated radiant floor:

Air cannot carry a large amount of heat, and it is not cost-effective in residential applications. It can be combined with the solar heating system.

Electric radiant floors:

The electric radiant floor contains cables. Electrically conductive plastic will be laid below a floor covering.

Hydronic system:

It is the most common and cost-effective solution. The methods of installing electric and hydronic radiant heating system are similar.

Our experts will offer you the best tips for your heating system. Contact JetAirCo and find the right solution for your heating system. We have a team of experts who will visit your house and conduct thorough research about your heating system. We offer services in Hauppauge, Smithtown, Northport, and other areas of New York.

No matter which type of heating system you have, it consumes energy and increases your expenditure. Knowing tips to use your heating systems properly helps you in many ways. If you are finding ways to cut down your energy cost, read the content below. You can call JetAirCo and fix any problems with your heating system. We offer heating system maintenance and repair services in Smithtown, Hauppauge, and Long Island, New York. Our experts will also offer you cost-effective solutions for saving your energy and reduce the cost.

While using your heating systems, you can keep in mind a few factors that will give you better options without compromising your comfort.

You can set your programmable thermostat at a low temperature, maintaining your comfort level. Reduce a few degrees when you are away from your house, or you are sleeping. This simple habit will give you an unexpected result when it comes to saving energy bills.

Do not ignore the cleanliness of your furnace’s filters. Filters play an important role in improving the quality of the air. A clean air filter also helps your system work flawlessly, which lowers energy consumption.

A few important parts of your system need always cleaning, including warm-air registers, baseboard heaters, radiators, and more. Ensure that drapes or furniture do not cover them.

Call an expert and drain the trapped air in the hot water radiator. An expert will perform the task perfectly. JetAirCo is an experienced name that offers heating services in a wide region of New York. If you need any help to take care of your system, call JetAirCo for the services. We have an experienced team that checks your home environment and will offer you a cost-effective solution.

Turn off kitchen, bath, and other exhaust fans within 20 minutes of completing your cooking or bathing. If you want to buy new fans, buy high-efficient ones with a low-noise feature.

In the day time, let the sun rays in to heat your house naturally. These are some tips that you can follow for heating your house. It reduces your energy costs also. Remember that maintenance is the key to keep your heating system in good condition. The better your system, the higher it performs.

If you need any suggestions for heating system maintenance, call us. Our expert will guide you to better care of your system. we will provide you tips to check the system’s problems on your own. But, hire an expert for annual maintenance because this will ensure that your system will run perfectly.

If your furnace starts blowing cold air, this is genuinely the situation that makes you worried. The comfort of heating in the freezing weather gets disturbed completely, and you need the right solutions immediately to restore your peace and comfort. JetAirCo has always been there with you for serving you the proper heating solutions. We have experienced professionals who visit your place and check your furnace to fix the issue. We offer heating services in Hauppauge, Smithtown, Northport, and other areas of New York. If you have any problems with your HVAC systems, you will always have us beside you.

If your furnace is blowing cold air, there are a few things that could cause this problem. Here, we have mentioned all possible reasons for your furnace blowing cold air instead of the warm, comfortable breeze.

Incorrect thermostat setting:

Sometimes, people set their thermostats wrongly, which causes this problem. Keep your thermostat always in the AUTO setting. Your furnace will run correctly. Check the battery of your thermostat also. If the battery is dead, your furnace will stop working.

Sometimes, you bought the wrong thermostat for your system. This incompatible issue causes heating problems. Check your thermostat or hire a professional who will check your thermostat and the compatible issue.

Dirty air filter:

Your air filter gets blocked due to the lack of maintenance. It disturbs the airflow, and you do not get satisfied with heating for your comfort. It also increases the chances of overheating in the system. The safety switch will shut off the burners to prevent any dangerous situation.

If you are using a disposable filter, you can change it. If it the permanent, then you can clean your air filter. But, hiring a heating professional is the safest option to fix the issue. It involves checking technical parts, which you cannot do.

Clogged condensate line:

High-efficiency furnaces generate condensed liquid, which the system drains away. But, if the condensate drains line gets clogged, the furnace will start blowing cold air. JetAirCo has always been ready to meet your requirements. Visit our branch in Long Island, New York. We are actively serving in areas like Hauppauge, Smithtown, Northport, and other areas.

No Pilot light:

You will not get a pilot light if it is blown out or not lighting correctly. Due to blockage, the pilot light may not be lighting correctly. You can relight the pilot light carefully. If it is not lightened or goes out again in a minute, call an HVAC service provider. Your system needs an expert solution.

Leaky ducts:

If you have an old system, leaky ducts are a very common problem. Leaky ducts cause heat loss, increasing energy consumption. JetAirCo can protect you from the growing energy bills. Our solution is effective and affordable also.

Insufficient gas supply:

If your gas supply gets disturbed, you will not get heating from your furnace. Check your gas supply and check the valve also.

In the winter, do not spend a day without your furnace. We give you the right solution for you. Call JetAirCo, and you will get immediate service for your heating system. We offer heating services in Hauppauge, Smithtown, Northport, and other areas of New York.

Your heating system is one of the high sources of energy consumption in your house. But, when it comes to comfort, we are ready to bear this pinch in the pocket. But, if you get a constantly increasing energy bill, you need to follow a few tricks to improve your heating system’s efficiency. Here, we talk about some common tips that make you more aware of your heating system. Maintenance comes first to improve efficiency and cut down your energy cost. JetAirCo is offering heating services in Hauppauge, Smithtown, Northport, and other areas of New York.

If your heating system increases your expenses, the time has come to check a few things that can help you save money. Here, you will get important practices that allow you to use your heating system in the best way.

Lower the temperature:

If you go by the recommendation of the Department of Energy, set the temperature of your heating system to about 68-degree Fahrenheit. It will save you money, and you can bear this cost easily. When you are away from your home, you can lower the temperature down by 10-degree Fahrenheit. Do not shut down your system completely because it makes the environment cold, and your system will again work harder to raise the temperature. It increases energy consumption. If you think that your heating system does not provide enough heat as it did before, get the system checked by professionals. Hire a heating system service provider near you.

You can call JetAirCo for your heating system maintenance and repair in Northport, Smithtown, Hauppauge, and other areas. We have a team of experienced professionals who will do an in-depth analysis of your home environment.

The use of thermostat:

If you are using a heat pump for heating your home, you can avoid a programmable thermostat for regulating the temperature. In the summer, your heat pump works like an air conditioner. So, your thermostat can help you get the right temperature by saving energy and money. But, when you turn on your heat pump’s heating mode, your thermostat will not work perfectly. Your heating system may operate in-efficiently. If you have a heat pump, try to maintain a moderate temperature to make your heating system work perfectly.

We will be happy to help you in solving your queries. We are offering heating system services in Hauppauge, Smithtown, Northport, and more.

Here are a few things that you can consider for your heating system to cut down your energy cost. Insulate your house perfectly to keep the warm air inside your house. It keeps the air warm, which reduces pressure on your heating system. If you use a chimney, shut your chimney damper after your use to lock the warm air for your comfort. JetAirCo will always be ready to enhance your comfort level. If you plan to buy a heating system, you can contact us to choose the best one for your use. We offer heating system repair and maintenance service in Hauppauge, Smithtown, Northport, and other areas.

You are inside your house in a cozy environment, but that does not mean you are safe from contaminants. Many factors pollute your home environment, and your furnace is one of the prime factors that can make the inside air poor. We recommend you hire an experienced Heating System Maintenance service provider and check your living environment. JetAirCo brings you some common situations where your furnace contaminates the air.

When you do not maintain your furnace properly, it causes so many issues connected to your health and wellness. In the winter, you may keep your home sealed perfectly for not allowing the outside air to let in. if you have a faulty furnace, this turns the situation worse for you. In a closed environment, the pollutants in the air cannot flow outside.

Hire an expert and maintain your furnace properly. JetAirCo is offering Heating Repairs in Hauppauge, Smithtown, North Port, and other areas of New York. Contact us and get the best service. The company has a trusted customer network, and our loyal clients spread our names. We are happy to serve people. If you have any problem with your heating system, you can contact us. Our experts will reach your place immediately and try to solve your problems without taking much time.

If you want your furnace to work perfectly, taking care of your furnace’s ventilation is a must thing for you. A well-ventilated furnace will always meet your requirement by offering the right temperature for your environment.

Your furnace produces carbon, which goes outside through the un-clogged ventilation. If it gets blocked, the amount of carbon monoxide in the air will also increase, making your environment dangerous to your health.

We recommend a carbon monoxide monitor that detects the presence of carbon in the air. It alerts you. Pay attention to the maintenance of your furnace. You can do some easy checks without in-depth technical knowledge. But, your furnace needs proper maintenance at least twice a year. JetAirCo can help you get the right maintenance service within your budget. We are offering Heating Maintenance in Northport, Hauppauge, Smithtown, and other areas of New York.

We request you to check a few things before our expert team visits your place. Sometimes, there are minor issues like dead thermostat batteries or wrong heating mode, which you can handle perfectly.

Here, we mention a few things that you can check before we arrive at your place.

  1. Make sure that thermostat is in the heating position.
  2. Check the programming setting of your thermostat.
  3. Replace the batteries of your thermostat.
  4. Check there is a proper electricity flow to your thermostat.
  5. Check the furnace switch.
  6. Examine your furnace’s vents

If you find that the issue is somewhere else, call JetAirCo. We will reach your place and offer the best services for your heating system. A faulty heating system is dangerous to your health. Leave the technical parts to us. We offer heating services in Hauppauge, Smithtown, Northport, and other parts of New York. Call us and fix the appointment.

The furnace filter is one of the important parts of a furnace and it also improves the air quality. You cannot overlook the maintenance of the filter because it can cause so many health issues. Since experts always recommend change furnace filter, many people are asking questions about how they can reuse the furnace filter without lowering the air quality. You can contact JetAirCo to know the right way for the maintenance of your heating service. You will get the heating installation service in Long Island, Hauppauge, Smithtown, and in more areas.

A dirty filter causes a dangerous atmosphere:

When your filter is dirty, it does not filter the pollutants from the air. Even a little bit dirty also interrupts the airflow and your heating system also works hard to keep the space warm. So, it will increase your energy-consuming costs because of the reduced airflow.

The real problem is also associated with a filter that is clogged. In that case, no air can pass through it. The heated air overheats the heat exchanger and your furnace will stop performing.

Types of furnace filter:

If you are worried about the cleaning of the filter, you can seek help from professionals. JetAirCo will offer heating system repair and maintenance service. The company has a wide presence in Hauppauge, Smithtown, Northport, and in other areas.

Before you pick the maintenance, you have to be aware of the type of system you have. There are two types of filters used in the furnace – disposable and permanent filters. If your furnace runs with the disposable filter, you need to change it in every 2 to 3 months. It depends on the size and type of filter.

If you are using a permanent filter, you can reuse your filter after a proper cleaning. You can follow some easy tips to clean your filter. You need to check the part and clean it. You need to ensure that the filter should not be too dirty.

Cleaning the permanent filer does not take too much time, anyone can do this. Just remover the filter from the furnace and rinse it to clean the dust. Dry it completely and insert it the furnace again.

How to improve air quality:

If you are concerned about the indoor air quality, you can choose the filter with the MERV rating. The higher the rating, the finer the filtration will be. The rating decides the size of the particles the filter is capable of filtering.

So, this can help you a lot. If you want more detailed information, you can call JetAirCo. The company is offering heating services for your systems in Hauppauge, Smithtown, Northport, and in more areas. 

A heat pump is comparably a cheaper choice for your heating system because it can be used in both heating and cooling conditions. Unlike other systems used for heating your home, it is one of the most cost-effective solutions. But, your location and the weather condition play a major role in choosing a heat pump. You must consult a professional for improving your knowledge of the heat pump. People are commonly aware of furnaces and boiler type heating systems, and they have a little knowledge about the heat pump. Contact JetAirCo and find the best solution for your heating system.

JetAirCo is an experienced name, and they will provide you the right support. Contact the company if you have any problems with your HVAC systems. Our experienced team will visit your place and solve the issues without taking much time. We are offering heating services in Hauppauge, Smithtown, Northport, and more.

A heat pump does not work like other heating systems. Rather, it is more similar to an air conditioner. It uses the refrigerant principle for heating or cooling your house. In the cooling season, the system extracts heat from the indoors and distributes it to the outdoor. The system reverses the process in the heating season.

Whether heat pump right for you?

A heat pump will benefit you or not depends on some factors, including your climate, the fuel type available in your area, and the insulation in your home. All these factors play an important role in offering the desired temperature for your house.

If you are living in a too cold climate, a heat pump will not be enough. The system works efficiently for the moderate climate area. You will need supplementary heat if the temperature remains between 30 and 45 degrees F, causing higher energy consumption.

If your area has natural gas availability, you can buy a heat pump that works on the forced air heating and air conditioning principles.

Natural gas for your heat pump offers you a cost-effective solution for your house. It keeps the temperature within your comfort level and you will enjoy the best benefits for your heating system.

An experienced professional will help you pick the right system for your heating system. They consider the economic condition and try to learn how the system helps you save energy. Check the price and the efficiency of the system, and then decide anything.

JetAirCo is an experienced company with a professional team. Whenever you experience any problem regarding your HVAC system, you can contact us. We have services in Long Island, Hauppauge, Smithtown, and Northport. Call us to hire our services.  

Heating systems provide heat and it keeps you warm in chilling weather. There are 5 most common types of heating systems available in the market and we are talking about them here. If you are looking for the best system for your home, contact JetAirCo. The company has years of experience in the field of providing heating and cooling services to the household. We can help you pick the best heating system for your house.

Furnace:

A furnace is one of the most common types of heating systems for your house. It mainly works on the forced air concept where the air is heated by electricity, gas, propane, or oil. Then, the hot air keeps your room warm through the vents or the ductwork. The common places where you can find your system are basement, attic, or crawl space.

Heat pumps and geothermal heating system:

Heat pumps are very common in the moderate climate area and use electricity to move heat through the ducts. Heat pumps have two components – one stays outside and another one is kept inside of your house.

A geothermal heat pump is there to make your room warm and hot. It uses the earth’s temperature to heat or cool your room. It has no harmful emotion and it is energy-efficient also.

If you are confused about which system to buy, we recommend you call us for the best option. JetAirCo is offering heating services in Hauppauge, Smithtown, Northport, and more areas. Our branch is located in Long Island, New York.

Boiler heating system:

Boilers use the stored water to keep a space warm and it also uses oil, gas, electricity, and propane gas. Through the baseboard radiator and radiant heat floor systems, it keeps your room hot and warm.

Radiator heating system:

This is an old system and it comes up with a sealed container and it also has a boiler to heat your room.

Packaged unit heating system:

This type of heating system has both a heating and cooling unit. It stays on the roof of your house. It uses gas or electricity for heating and cooling your home. It heats your room through the ductwork.

Call JetAirCo and hire the best heating and cooling services for your house. We have a branch in Long Island, New York. We are also offering heating services in Hauppauge, Smithtown, Northport, and more.