The efficiency of your heating system is important because it reduces your electricity costs. So, always choose the high-efficiency heating system that reduces energy consumption. When you are looking for a heating system, you will get plenty of choices that may make you confused. You can consult an experienced HVAC service provider that has years of knowledge in the field. JetAirCo is a trusted company offering HVAC maintenance services in Smithtown, Northport, and other areas of New York.

Having an experienced company by your side will help you in many ways. Apart from the high efficiency, you must check the size of your system. It is an important factor to reduce the electricity bills. If the size is too small or too low, you end up paying extra when it comes to the energy cost. You can call JetAirCo and choose the best heating system that meets your requirement if you are planning to buy the most efficient heating system for your house.

When it comes to choosing a high-efficiency heating system, a heat pump comes first in mind. Heat pumps move heat from one place to another, which needs less electricity to operate. In the summer season, it captures heat from your home and dumps it outside. In the winter season, the heat pumps bring outside heat to your home. The best thing is that it does not run on fossil fuel, so it does not generate combustion gas that affects the environment.

If you want to buy a quality heat pump, you can consult with us. JetAirCo offers the best heating system maintenance in Long Island and other places. The heating system also comes in a variety. Two types of heating systems are very common.

Air-Source Heat Pump:

The heat pump uses the heat exchange properties of the refrigerant for removing or bringing heat from or in your environment. When heating, it captures heat from outside and brings in your home environment. When cooling, it removes heat from the inside air.

Geothermal heat pump:

This heat pump uses soil or the outside water body near your house. Pipes are installed several feet deep from the surface in a vertical loop system. It provides the most efficient type of heating, lowering bills up to 70%. The initial investment is higher, but the long-term saving is also countable.

Furnaces:

Another common type of heating system is a furnace. Gas furnaces have huge popularity in America. Although old models are not very efficient, new models will meet your demands since it offers advanced technologies.

Gas furnaces run on the natural gas system, which local authority supplies. Its operation cost is lower than the heat pump, but the efficiency is also very low. Oil furnaces another type of furnace, and local authority supplies fuel oil in bulk to reduce the operation costs. You can also opt for electricity furnaces.

You can even choose boilers also for your home heating system. The best way to pick the right heating system is to ask an experienced one. JetAirCo will meet your demands. It offers Heating Maintenance Services in Smithtown and other parts of New York. Contact us for more details.

Your heating system needs proper servicing to run smoothly at the right time. You can perform some maintenance tips to ensure that you meet all requirements. For the technical check-up, you need an experienced professional HVAC service provider that understands every problem quickly and solves it without taking time. We have discussed here how you can maintain your heating system. Contact JetAirCo if you need any help. We are an experienced service provider, offering heating maintenance service in Smithtown, Long Island, New York.

We believe that your heating system needs seasonal maintenance from an expert. There are many things to be done to keep your system in perfect condition. You can opt for at least two maintenance in a year to keep your system running. For all technical parts, you must contact a professional. Doing things on your own can harm your system and put your life at risk.

Start with the thermostat care:

You can start your maintenance check-up with the thermostat. Turn up your thermostat before the heating and cooling session. If your heating system continues to heat your home, your system is perfect. If your furnace stops after a few minutes of starting your thermostat, there will be mainly two reasons.

Your thermostat will not be adjusted properly, which means it needs recalibration. If the boiler or furnace ignites flames after starting your thermostat, you can check the color and shapes of flames for more details. A quality furnace always has tight oval and blue flames. If you get the tinges of yellow in flames, call JetAirCo and get your system checked.

The maintenance of the forced air system:

You must clear the airways to enhance the efficiency of your system and improve the indoor air quality. Check the filters at least once a month, and you can replace them if required. If you have pets or one of your family members has an asthma problem, you must check the air filter more frequently. JetAirCo suggests you check the filters every month and replace your filter once in three months.

You can also concentrate on cleaning your ductwork to keep the environment pollution-free. An expert will also check the combustion chamber to clean the dust and soot. It is an expert’s work. Blower cleaning is another technical area, and your HVAC company takes care of it very well. Checking your heating system is professional work.

JetAirCo can help you fix problems with your heating system. We offer Heating Systems Services in Smithtown, Northport, and other areas. We have an experienced team who dedicated work for you.

When it comes to maintaining your air conditioner, the outdoor unit also needs the right maintenance. Here, we have explained about the clearance space your outdoor unit needs to offer the best performance. When you consult HVAC experts, they will tell you the desired maintenance rules for your heating or cooling system. JetAirCo is known for its prompt services to fix any problem regarding your HVAC system. We offer heating system service in Smithtown, Hauppauge, Long Island, and more.

The clearance space matters a lot for the performance of your HVAC systems. If the surrounding material is air traveling convenient, less clearance around the outdoor unit does not cause any damage. But, if the surrounding material is solid, you must follow the clearance rules to take care of the system.

You can consider these factors while installing your outdoor unit. When an experienced HVAC company handles the installation job, they implement every rule that takes care of your system for the long run.

JetAirCo offers heating system maintenance in Long Island. If you live in New York, you can contact us for the maintenance of your HVAC systems. We hold vast experience in handling different HVAC systems. No matter what your system requires, you will always get a satisfying service from us.

We offer site inspection:

Before installing your HVAC system, we offer site inspection to take note of the environment where your outdoor unit will be placed. We will get a clear view of the clearance space that your outdoor unit requires. We also concentrate on possible risks your system may encounter in the future. Our task is to eliminate all issues and offer a safe environment for your living.

If your hired service provider does not offer the same benefit, you can look for the best HVAC company. If HVAC experts do not share the details with you, you can ask for the information. Every HVAC company has the responsibility to share these details with you. A not-so-experienced name may skip the area of study, putting your system at risk. So, always choose an experienced service that offers you the guided information that helps you maintain your system.

The clearance distance for your system outdoor unit needs your attention. Ask your HVAC system service provider about these details.

Why should you need clearance?

The working efficiency of your air conditioner will enhance when there is proper airflow between the conditioner and compressor of your ac outdoor unit. If the flow gets obstructed, your HVAC system will not offer the same level of comfort.

A properly cleared space helps the outdoor unit perform perfectly, increasing the efficiency of your system. If your system does not provide enough cooling or you experience high electricity bills suddenly, you can check the clearance space of the outdoor unit. Call JetAirCo to get the best solution. We analyze your problem and offer you the right services. We offer Heating System Repair Services in Hauppauge, Smithtown, Northport, and other areas of New York. Please contact us for more details.

Despite the way that we’re simply a month into the fall season, an ever-increasing number of mortgage holders are starting to set up their homes for winter to guarantee that they stay warm and agreeable all through the season. Regularly, they do this by supplanting their material frameworks or even their windows. Undoubtedly, these are good choices. However, do you know furnace maintenance tips can also keep your place comfortable?

Remember that experts suggest that you don’t just turn on your furnace in the winter months. This is because your heating system remains idle for a couple of months. Hence, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Services and after that activate your furnace system.

Things You Should Perform Before Turning on Your Furnace System:

In the undermentioned section, JetAirCo listed six crucial aspects you must consider before turning on your furnace during the winter months.

1. Check the Filters:

Before you activate your heating system, you must thoroughly check out the air filter. Keep in mind; you haven’t used your furnace for months. Hence, there’s a considerable possibility that dirt and lose particles might gather within your furnace. If you notice a dirty air filter, give JetAirCo Furnaces and Boilers Service a call and replace the clogged air filter before you use the furnace. A dirty air filter can reduce the indoor air quality as well as negatively affect your family member’s health, especially if you have children and senior citizens at home.

2. Be Sure that the Thermostat Works Correctly:

As per a 2018 survey, the thermostat can affect the furnace’s efficiency. Less efficiency means you might end up with higher energy bills. So, hire JetAirCo Gas Furnace Repair Services, and ensure that the thermostat works smoothly before using your furnace heating system. 

3. Search for Drafty Place:

Apart from checking the thermostat settings and air filter, you should search for drafty areas in your house. While doing this, you need to check your windows and doors. Keep in mind; if your windows and doors get damaged, air might escape from these places.  As a result, your furnace will take longer to make your place warm. Therefore, if you notice a draft in your house due to damaged doors and windows, instantly call JetAirCo Heating Systems Services and repair or replace them to prevent air from escaping.

4. Test Carbon Monoxide Detectors:

As per JetAirCo professional, it’s not just the thermostat you inspect before turning on your furnace; you should also see the carbon monoxide detectors to ensure that it still works properly. It’s an essential step as a damaged furnace can create toxic carbon monoxide gas into your house. Therefore, check your carbon monoxide detector thoroughly before turning on the furnace system in winter. However, if you don’t have sufficient time, hire JetAirCo Furnace Repair Services and resolve all your queries at the earliest time.

5. Remove Particles Placed Near the Furnace:

Before you activate your furnace for the winter months, ensure to take out items that are placed near your heating system. These particles often include furniture, old clothing, or any other loose particles. Hence, inspect every area surrounding your furnace and keep them away to a safe place. Besides, ensure that items don’t block the air vents and air ductwork as these might prevent air from circulating in your house.

6. Note Issues Experienced by your Furnace:

While inspecting your furnace heating system, it’s highly recommended to do an overall checking of the furnace unit. Also, when you perform this, take note of the common issues that your furnace system might experience. For example, you might hear unwanted sounds from your heating system, the furnace suddenly stops responding, and many others. If these problems arise, instantly call JetAirCo Heating Systems Maintenance Services to ensure your furnace’s peak performance.

Conclusion

So, if you search for someone who can assist you in maintaining and repairing your furnace at a pocket-friendly price, give JetAirCo  Furnace Repair Services a chance to become your service partner. Our humble request is to contact us if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York.

When a Heating Service provider recommends maintaining and repairing your system, we often pass over it. And think they give us such suggestions just to earn money. Our beliefs will seem assertive, mainly if the heating system works fine in the last season.

However, like other home appliances, homeowners should maintain and repair their heating systems over time. Else, you might experience several issues, such as your heating system might stop responding in the middle of the cold season.

Fortunately, if you stay in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, you can fix your problems with JetAirCo Heating Service at a pocket-friendly price. Besides, here JetAirCo put some vital information that will make the task easy for you.

Let’s Understand What Heating Systems Maintenance Is:

In simple terms, a service offered by many providers, including JetAirCo Heating System Maintenance. In the maintenance procedure, the contractor will first prepare a checklist of the heating system parts that need to inspect, clean, test and adjust. Based on the checklist, the technician will perform the necessary tasks, including cleaning and changing the air filter, ensuring that the outdoor unit is free from obstacles. Remember that you should call your technician at least once a month to well-maintain your heating system.

If you hire JetAirCo Heating Systems Services, you will get some extra. Such as, by adjusting the thermostat settings, our technician can increase your heating system’s efficiency and performance.

Now, Focus on When Maintenance & Repair is Required:

We Hope you might guess that the ideal time to maintain and repair your heating system is before you need to use them. As per JetAirCo, the best time to maintain and repair your heating system is before the winter season. Remember that, during the summer season, the heating system technician’s demand will be at the highest position. Hence, at that moment, if you want to hire a professional contractor, you have to spend an extra amount of money.

However, the essential factor is how often you schedule your heating system maintenance season. For instance, if you use a standard heating system, such as HVAC, you should schedule an annual maintenance season. On the other hand, if you rely upon a heat pump, you can plan for maintenance after 2 to 3 years.

Repair Or Replace:

Probably the most confusing question comes to a homeowner’s mind. If something happens wrong with your heating system, many times, if you hire a reliable contractor such as JetAirCo Heating Service, you can solve your problems at an affordable price. For example, if you cannot set the thermostat to its desired settings or need to change the air filter, air ducts, you can hire us. And make the necessary changes within a flicker of time. However, there are certain circumstances where you don’t have any other options left rather than replacing your heating system. Such as,

  1. You used an old heating system.
  2. Always hear unwanted sounds while turning on your system.
  3. You need to do frequent repairs.

Increase Your Safety with JetAirCo

if you maintain your heating system over time, it will provide a comfortable environment. A damaged or broken heating system can lead to several issues and even can cause a fire accident. So, don’t take any risks and contact  JetAirCo Heating Maintenance Repair Service today if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York. Hire us, and provide an extra layer of security to your family member’s comfort.

When your heating system stops responding, you might pick up your phone and call your Heating Systems Maintenance Services to repair your system. Undoubtedly, it’s a good choice, especially if you live in Hauppauge, Smithtown, Northport, and Long Island, located in New York, and opt for JetAirCo Heating System Repair Services. However, do you know specific tasks you can perform on your own and save unnecessary repairing costs?

Yes, being a professional expert in the industry, millions of people call JetAirCo and resolve issues independently. In this guide, we will explain seven things you must cross-check before hiring a professional expert.

However, if you feel uncomfortable checking these things, you must call technicians and hand over your tasks.

1.  Inspect Thermostat:

The foremost thing you must check before calling your Heating Systems Service provider. Be sure that you set your thermostat to the temperature recommended by manufacturers. You might don’t believe it, but technicians can often fix the problem by simply adjusting the thermostat to its desired settings. Many times, homeowners didn’t turn on the selector switch, and as a result, they will be unable to set the required temperature.

Hence, before you hire a professional expert, always cross-check and ensure that you have correctly set the desired temperature as well as adequately set the selector switch. Unfortunately, if the thermostat has no display, you don’t have any other options rather than calling the JetAirCo Heating System Repair Services.

2. Clean Filters:

Be sure that you use a clean air filter. Many homeowners inform JetAirCo that they use a dirty air filter, and due to this, their heating system stops responding. However, after changing the air filter, they smoothly operate the heating system. Hence, before opting for Heating Systems Services, double-check that you have a neat & clean air filter.

3. Fuel Supply:

In case you use a gas furnace, then ensure that the gas service hasn’t been stopped. Often, manufacturers deactivate the gas service because of the risks of the development of a leak. And sometimes it might create a problem for your heating system. Therefore, see the fuel supply and be sure that the gas service is activated. However, it will be a risky task for you if you don’t have sufficient knowledge; hence be on the safe side and hire JetAirCo Heating Systems Maintenance Services to perform your task in the most effective way.

4. Pilot Lights:

In case you are using an older gas furnace or water heater, be sure that the pilot light is in a lit state. Else, you might suffer from numerous heating system errors.

On the other hand, if you use an electric furnace heating system, inspect the flash codes are set correctly. However, the best way to deal with the situation is to call a professional technician such as JetAirCo.

5. Check Air Vents:

For any heating system, air vents are the most sensitive components. Hence during the heating system troubleshooting, it will be compulsory to inspect air ducts, vents, blockages and ensure that no blockage can lead to factors of abnormal airflow. Unfortunately, if the error still persists after doing so, don’t waste a single moment and seek professional assistance.

6.  Check Outside Unit:

We hope you might know that through the outside unit, airflow will enter your house.  Often, debris, including branches and leaves, might gather over the outdoor unit, and as a result, it might stop airflow. Therefore, it’s highly recommended to inspect the outdoor unit from top to bottom and remove debris, and other loose particles at least once a month.

7. Power Outages:

Before you hire a reliable, professional expert such as JetAirCo, it’s necessary to check the power outages. Many times, it’s the culprit for irregular airflow. Hence, inspect the power outages and after that call out a technician.

Bottom Lines

You can apply the above tactics to prevent unnecessary repairing costs. However, if you don’t know how to attempt these tips appropriately, things might go against you. Hence, don’t take any risks and contact JetAirCo Maintenance Repair Service and avail of our services at a pocket-friendly price if you stay near Hauppauge, Smithtown, Northport, and Long Island, located in New York.

The pandemic has brought up numerous issues about the transmission of infections and how individuals can best secure themselves. Undoubtedly, wearing masks and social distance decreases the spreading chance of Corona Virus. However, we need to consider other aspects as well.

Many people don’t become aware of the fact that how coronavirus spread within their house through their heating system. And most importantly, what strategy to apply to reduce the risk of infection.

Fortunately, the JetAirCo heating service comes with some pocket-friendly tips that will help you keep away from this virus. Besides, if you live near Hauppauge, Smithtown, Northport, Long Island, and New York, you can contact us anytime to solve any issue related to your heating system.

Can Coronavirus Spread Via Air?

Accoding to scientists, this infection can spread through multiple actions. For instance, coughing, talking and sneezing.

As per JetAirCo heating service, these droplets can stay in the air for about four hours. Other studies show others data. However, the ultimate fact is, coronavirus can spread through the air.

Does Heating System Spread Coronavirus?

Researchers prove that it’s harder to get the infection in a space with an appropriate air course since irresistible particles get the opportunity of being weakened or dispersed via air flows.

 However, accoding to CDC guidelines, homeowners must update their heating system and ensure that it is running smoothly to prevent coronavirus spread.  Also, repair its components whenever necessary.

The Way you can Maintain your Heating System to Prevent COVID-19

Following are the strategies that you can apply to well-maintain your heating system as well as prevent the coronavirus spread.

Schedule Daily Inspection:

Bear in mind, a regular heating system inspection and annual heating system maintenance can make sure your system runs its peak efficiency.  Doing this also means improved filtration,  better air circulation, and fresh air overall.

A professional heating service provider like JetAirco can quickly identify the issue that you might not consider or overlook. As per experts, you should inspect your heating system at least two times a year. However, JetAirCo advises you, hire a professional expert when the indoor air quality is not suitable for your family member’s health.

Increase Outdoor Air Distribution:

Another effective strategy helps you to decrease the chances of coronavirus spread.  Via your heating system, increase outdoor air circulation, and increase the indoor airflow in your house.  In case any virus particles have been pumped through the heating system, the outside circulation might disperse them.  Besides, opening doors, windows, and other ventilation sources are some of the most straightforward adjustments to improve air circulation and stop the coronavirus spread.

Upgrade your Older Heating System:

Are you using a heating system for more than ten years? If so, then it’s the ideal time to replace or repair older parts. Or even purchase a new heating system.

 For example, if you replace your system’s fan motor, it will give you more control over airflow. It will also boost up the heating system‘s flexibility.  Besides, suppose you install high-quality air purification capabilities- for instance, UV technology for heating system, a new filter. In that case, these will also consider as an essential consideration to prevent the COVID-19 spread.

Combat the COVID-19 Spread with JetAirCo

As said earlier, coronavirus spread via droplets in the air; hence, it’s crucial to maintain proper air distribution- something that the heating system design to do. So, in case you want to make some adjustments to your heating system to prevent the spread of coronavirus, feel free to contact JetAirCo Heating Installation and Maintenance service centerThe JetAirCo professional is always dedicated to assuring your heating system is running effectively and smoothly. Hence, don’t waste your precious time and take our assistance if you live near Hauppauge, Smithtown, Northport, Long Island, and New York.

A heating system is something that provides us with warm air during the winter season. We spend thousands of money to purchase a heating system. Hence, it will not be our expectations to send the heating system for repair in the middle of the cold months.

However, being an electronic device, issues with the heating system are quite common. Though well-maintain, we can add years to the heating system; however, after a certain time, you need to spend some money on repairing one or two components of your heating system.

With years of experience here, JetAirCo heating repair professionals share some common heating system problems. And if you live near Hauppauge, Smithtown, Northport, Long Island, and New York and suffer from heating system issues, contact jetAirCo professional today.

Top Heating System Problems:

In this blog, JetAirCo heating repair professionals explained the common issues you might experience while using a heating system.

Heating System Won’t Turn Off:

In case your system continues to blow warm air, first be sure that you set your system on Auto mode. However, if still the same things happen, probably the thermostat was broken or set incorrectly. Also, this can occur due to the system’s blower. To overcome the situation, thoroughly follow the manufacturer’s guide and apply the necessary tactics to fix the issue. Unfortunately, if nothing happens, call out a professional technician like JetAirCo.

Your Home Isn’t Heated Equally:

Is your house not heated equally? If your answer is yes, then a dirty or clogged filter could be the culprit. Occasionally, issues with air ductwork, fan motors can lead to the problem. Remember that you can easily replace the air filter. However, if something happens wrong with the air ductwork, you must take assistance from JetAirCo’s technician.

Thermostat Isn’t Working:

In case you haven’t properly set the system thermostat or change the system control from default, you might experience different issues with the thermostat. If you use a digital thermostat, first replace its batteries. Unfortunately, if this doesn’t work for you, follow the manufacturer’s guidelines and try to reset the thermostat.

Still, nothing happens? Rely upon the JetAirCo’s professionals.

Heating System’s Fan Stop Responding:

Another common heating system issue.  In case you notice that your heating system’s fan stops responding, inspect the thermostat first and ensure that the thermostat settings are OK. Then, be sure that the air filter isn’t clogged or dirty. After that, see whether the circuit breakers are on or not. In case not, turn on the circuit breakers. Still, facing the same error? Get in touch with a licensed JetAirCo heating system professional.

Mold in Heating System:

Moisture will accumulate over your heating system isn’t surprising, especially when you have old or faulty ductwork.

The best thing you can do before this happens is to seal the air ducts so that mold doesn’t have a chance to accumulate. On the other hand, if you already experienced the problem, hire a professional expert and let them take care of your heating system.

Smell Coming from the Heating System:

Have you ever experienced a burning smell when you start your heating system for the first time in the winter? Most of the time, due to a dirty air filter, the smell could occur. In case the burning smell persists then, turn off your heating system as well as unplug it from the electrical socket. After unplug, call out a licensed technician to solve the problem.

Want the best Heating Service Repair Center? Contact JetAirCo

These are the top heating system issues you can experience while running it. Fortunately, JetAirCo heating repair professionals are here to help you out. By providing quality service, we have already acquired a strong position in the same field. JetAirCo’s professionals are always ready to fix any issues related to the heating system. Please make us your service provider if you live near Hauppauge, Smithtown, Northport,  Long Island, and New York and spend some quality time with your family.

Your heating system is one of the most crucial components for adjusting a comfortable temperature inside your home. When you have an effective heating system, your life will be much easier and bring comfort to your home infrastructure.

Sitting inside of a hot home in the middle of the summer can be more than unbearable. Besides, it’s also bad for your health. As per the World Health Organization, the temperature inside your house shouldn’t increase above 78 degrees if you wish to avoid the possible health risks that can come along with the summer’s appearance.

Hence, if your house seems too hot this summer, it indicates that you need to have heating system repair done instantly and maintain a comfortable temperature within your house.

Signs your Place Might Require Heating System Repair:

Identifying, whether your heating system needs repairs or not, isn’t rocket science. However, it will be challenging for the normal homeowner to identify a flaw in the heating system. Remember that most of these signs are hidden and can be easily overlooked. These are the top 5 signs that indicate your heating system needs repairs instantly.

1.   High Utility Bills:

When your utility bills increase beyond your imagination, then possibly your heating system is the culprit. Besides, if your gas bills increase suddenly,  it could be because of your heating system.

With time, your heating system becomes less efficient and reduces efficiency. This means your system might take longer to provide your house the right temperature. Hence, check the last 3-4 months bills, and if you found that bills increase drastically, then it’s the perfect time to call a professional technician to repair your system.

2.   Burner Flame Turns Yellow:

We hope you notice that your heating system comes with a blue gas burner flame. If the burner flame suddenly turns yellow, it indicates that something happens wrong with your heating system. A yellow flame indicates the carbon monoxide present in your house. Carbon monoxide gas is very dangerous-especially for your children and pets. Therefore, when you see the furnace flame turning yellow, stop using your system and instantly contact a heating system service provider.

3.   Hear Unwanted Noise from your System:

Do you ever hear unwanted noise from your heating system whenever you want to start it? If yes, that’s not a good sign. It indicates there’s something wrong inside your system that’s causing this noise, and you have to call a technician to come and stop this unwanted sound.

4.   Thermostat Fluctuate Constantly:

If you have to adjust the thermostat too many times, it means something happens wrong. Also sometimes you might face difficulties adjusting some rooms temperature. Unfortunately, if you cannot adjust the thermostat after several attempts, leave the thermostat and pay attention to your heating system. There’s a possibility that the system might not equally distribute temperature to every room and due to this some room feels hot and others a bit cold.

You should quickly address the problem in order to prevent things from getting worse.

5.   Age of your System:

Like other appliances, a heating system also offers its service for a certain period of time. Generally, you can use your heating system for 7 to 8 years. However, if you maintain it well, the longevity can be up to 10 years. Not more than that.

Also, a pilot light is an amazing way to notify whether your heating system is old. If your system contains a pilot light, it means you use an old heating system. If this is the circumstance, then replacing your heating system with a new one will always be fruitful for you.

Grab the Best heating System Repair Service with JetAirCo

We hope till now you have understood the possible signs of heating system replacement. Looking for the best heating system repair service in  Hauppauge, Smithtown, Northport, and Long Island, New York? Your search can be ended with JetAirCo. By providing quality services to our customers, we acquire a strong reputation in the same field. Rely upon us and enjoy this summer with an effective heating system.

As the environment changes and gets warmer, it’s the perfect time to focus on your heating system maintenance and get ready for the extreme heat of summer that surely lies ahead. And if you wish to get high-quality indoor air and feel relax, you must maintain your heating system each spring. Besides, daily maintenance can improve your system’s efficiency, save your precious time, money, and easily avoid the need for emergency repairs.

To well-maintain your heating system, you can take help from this guide and keep your family member comfortable and cool this summer.

1. Change the Air Filters:

If you continuously use your heating system, the air filter will fill with debris and dirt after a certain period of time. If this happens then, the air filter will clog up and decrease the airflow. As a result, your heating system will work harder in order to adjust your required temperature. Besides, a clogged filter will also increase the utility bills. On the other hand, if you replace the clogged filter, your system will consume less energy, save your money on energy cost, and improve the indoor air quality. In case you are not sure how to detect and change the air filter, stay on the safe side and call a professional technician.

Besides, you are advised to take off the AC unit to the outside. However, it’s a small step, but you have to do it. Keep in mind if the AC cover is left on, your heating system won’t be able to produce much air.

2. Clean the System Unit:

Always remember grime, dust, and dirt can accumulate around the heating system unit throughout the winter. This is another vital task that you should do before summer knocks on your door. Hence, clean the coils and remove all dust and debris from areas surrounding the unit. Keep an eye on the condenser unit and ensure there are no nests around the unit. You are also advised to register and sehedule for maintenance so the professional technician can check the condenser unit for any damage and perform the necessary repairs. You can thoroughly check out the outside part of the unit, and don’t ever try to open the unit on your own to avoid possible injuries. In addition, if you want to clean the condenser unit, the task must be performed by a professional.

3. Upgrade the Thermostat:

If your heating system won’t have a programmable thermostat, spring is the ideal time to buy. Also, when you set the thermostat to 78 degrees for 8 hours a day, you can even save up to 15 % on your heating and cooling bills per year. The purpose of the thermostat is to keep the temperature more comfortable during the day. In order to upgrade your thermostat, hire a professional and don’t walk into a hothouse anymore.

4. Seal the Air Duct Work:

Remember that if the air ducts are cleaned and sealed properly, your heating system will provide its peak performance in the warmer months and save you money.

5. Add a Heat Pump or air conditioner to your Heating System in Spring:

If you are searching for adding cooling to your heating system, the ideal time to do in spring. In the summer months, there will be a huge demand for heating systems. Hence the price will be higher at that time. Besides, you might have to wait for a couple of days as summer is the busiest season for the heating and cooling system. Hence, if you want to add an air conditioner or heat pump to your system, instantly call out a professional and install it on your device.

6. Inspect the Boiler and Furnace:

Due to numerous reasons, your boiler can stop working. Most of the time, if dirt and dust gather over the heating system, your boiler might stop responding. In order to properly maintain your furnace or boiler, first check if the issue can be repaired or not. If yes, then hire a professional technician and leave the rest of the task to them.

If you use the boiler for more than 10 years, we suggest replacing it with a new one. Spring is the best time to replace the boiler as, during the spring months, the prices will low, and you can easily afford the expenses.

7. Inspect Ventilation and Radiation:

Ventilation delivers heat to your house. On the other hand, radiation will heat the surrounding air. Sometimes, it might tap air within the radiation, and if it happens, the heating system unit doesn’t fill up with water. As a result, your system will consume more fuel and expend more energy to adjust the temperature.

In these circumstances, hire a heating system specialist who will check every point from which air enters your house. Besides, they will also make sure that ventilation and radiation work smoothly and the electronic system will thoroughly communicate with the rest of the system.

8. Make a Schedule for your Heating System Maintenance:

Always remember spring is the best season for heating system maintenance. When you work on your system on hot days, you are going to take risks. Therefore, book an appointment for your heating system maintenance and hire a professional technician to maintain your system well.

JetAirCo is here to help

At JetAirCo, we will maintain, repair, and replace any part of your heating system. Our technicians will analyze your problem first and give you the best solution to your problem. We provide our heating system maintenance service in Hauppauge, Smithtown, Northport, and Long Island. Call us today and get the best heating system maintenance and repair service in New York.

As one of the costly & energy-hungry aspects of your house, your heating system needs careful installation, maintenance, and control in order to operate at the highest efficiency. Common Heating System installation mistakes lead to inefficiencies and unable to provide you with the desired temperature.

So if you are new in the heating system installation market, you probably want to know the best possible way to install the heating system without any hassle. Continue reading the guide as here we bring something unique for you.

Common Installation Mistakes and their Solutions :

Following are the mistakes the people make during the Heating system installation procedure. Let’s understand them one by one.

1.   Implementing a Poor Drainage System

If the drainage system hasn’t filtered properly, it creates a fairly substantial amount of moisture in the heating system operating. This can lead to backed-up pipes and even mold growth.

Unfortunately,  a poor drainage system is one of the most common heating systems installation mistakes. Hence, it will always be better to call a professional service provider and hand over the task to them. They will install the drainage system properly and make sure that everything is in its right place.

2.   Wrongly Installation of Thermostat

Many people don’t know that thermostat has a huge effect on the Heating system performance. However, improperly installing the thermostat is another common mistake that people make while installing their system. As a result, you have to put extra pressure to start your system.

Now you might think, what will be the ideal place to install the thermostat? The thermostat’s perfect location will be far away from the air vents and in a place where the sunlight hardly reaches. Remember that a properly installed thermostat will provide an accurate temperature.

3.   Inappropriately Sealing the Air Ducts

Improperly sealing the air ducts is another common mistake that most users made while trying to install the Heating system on their own. Always remember there should not be any cracks in the ductwork. Also, it would help if you closed up all the other cracks with a permanent sealer.

If you need any assistance, then immediately contact your local Heating system service provider. They will make sure that the air ducts are snugly secured in their position.

4.   Improperly Placing the Condenser

The condenser is the most crucial part of the heating system. The less it works, the more efficiently your system will run. Not only condenser save the optimal energy, but it increases the lifecycle of your system as well.

How to decrease strain on your Heating system? Regular clean it. Apart from this, you have to make sure that you put the condenser in the right place.

5.   Picking the Wrong Size Unit

Another common mistake people make when installing the heating system in their home or office. If your unit is small for your house, this will cause your system to work harder. As a result, you have to pay higher energy bills. On the other hand, if you select a big size unit, it means you spent unnecessary extra money.

There are multiple unit sizes available in the market, and you should pick up the one that matches your place’s need.

6.   Ignore the Air Flow

 If you wish to get your system’s peak performance, ensure that there is unrestricted airflow within the system. If the airflow becomes restricted or blocked, this can stain the system to a large degree and lost its ability to adjust your home temperature.

Therefore while planning for a heating system installation, give special attention to the airflow system and provide your family members with a friendly environment.

7.   Place Air Vents in Wrong Areas

The air vent’s location is important to the functionality of your heating system. If you install them in the wrong areas, you will struggle to get adequate airflow, and unfortunately, this is also a common mistake.

So how to avoid this mistake? Simple spread the air vents throughout your house and place them in areas where they won’t be wrapped up with other objects.

8.   Not Regularly Clean the Condenser

To run your system efficiently, the condenser needs to have at least 2 to 2.5 feet of clearance on each side. If you don’t do so, your system might break down completely.  Hence, keep this thing in mind and then start installing your heating system.

Want to Avoid these Common Mistakes? Contact us today

Heating system installation and maintenance mistakes can cost you hugely. Wist, to avoid huge expenses? If yes, we here at JetAirCo are the people you can rely upon. Our HVAC installation and maintenance service center is located in Hauppauge, Smithtown, Northport, and Long Island. We have installed countless heating systems over the years. Regardless of your heating system installation needs, our teams of dedicated professionals can accommodate you.

As the name says, space heaters can heat a single room or a small area. Whereas central heating heats different rooms of your house, space heaters have very limited use and are perfect for zone heating.  You have many options to fuel your heating systems, including electricity, natural gas, propane, fuel oil, and more. Portable heaters are mainly electric. The home heating system is a vast area, which includes different systems for heating the temperature of your house. Depending on the weather, climate, area, and preferences, you can buy a home heating system for your needs. You can also consult with a home heating system service provider near you. They are experts in the field and come up with the right solution that will meet your requirement perfectly.

Operation:

Space heaters can run on electricity or flammable fuel, such as natural gas, kerosene, propane, or wood. Electric space heaters are very common, and they come in different categories – convection heaters, infrared heaters, and heat pumps.

Convection heaters make the heating element hot by passing the electricity through it. The heating elements are made of metal or ceramic. Using convection, the system transfers heat to the air. Some systems use a fan to distribute the heat in a better way.

Infrared heaters also heat the conductive wire by passing electricity through it. It is mostly based on radiant heating, where hot wires warm the solid surface by emitting infrared rays. It does not warm the air directly.

Heat pumps do not produce heat; rather, it moves heat from outside to inside for warming the temperature. It cools down the temperature also by reversing the process.

Radiant heater:

It produces infrared radiation, which is easily absorbed by your skin before heating the air in the space. This type of heating system works perfectly for a poorly insulated home.

When you are using a heating system, safety is an unavoidable thing to consider. The space heater has the risk of fire, burns, and carbon monoxide poisoning.

You can follow some safety tips to keep your home environment safe and secure from any mishap.

Safety:

  1. Plug space heaters directly into the wall outlet instead of an extension cord.
  2. Check the plugs and cords to identify periodical damages.
  3. Keep the flammable material at least 3 feet away from the heater.
  4. Turn off your heater when you are away from home, or you are sleeping.

You can hire a heating expert to take care of your systems. They have wide knowledge in the area and will solve your problem quickly. JetAirCo is a coveted name for your heating system repair and maintenance. We have an experienced team who will visit your place and analyze the problem to figure out the right solution. If you live near Hauppauge, Smithtown, Northport, and Long Island areas, we can efficiently serve your demands. Please call us if you need urgent help with your HVAC systems.

Electric resistance heating is another way for your home heating systems, especially when electricity is the only choice for you. This system converts electricity into useable heat for your home. Due to the too much consumption of electricity, this heating system is costly to maintain. The combustion heating choices are a better option if you are looking for a cost-effective solution.  JetAirCo brings this topic to you for your information purpose. You can contact us anytime for your heating system maintenance and repair. We have an experienced team who will visit your place to fix your heating system issues.

Types of electric resistance heating system:

Electric furnace:

It is similar to your gas or oil-fired furnace. The only difference is that the system runs on electricity. You can also improve the efficiency of your heating system just like you do with your forced-air system by sealing ducts and replacing the filters.

Electric baseboard heaters:

This heating system comes up with electric heating elements enclosed in a metal pipe. They run through the baseboard of each room for heating your home. If you are looking for a zoning system, this proves to be the best option for you. Install a thermostat for each room for controlling the temperature. It will offer you the most customized option for your heating system.

Electric wall heater:

An electric wall heater is another form of electric resistance heating. It includes an electric heating element that has a fan to move the air in the heating element. This system is installed in the interior wall of your house.

Electric thermal storage:

This type of heating system is very advantageous where utility company charges higher during the day and lower rate at night. You can store heat at night to cut down the cost.

If you want to know more about the electric heating resistance system, you can contact us. We have the best team of heating system professionals who will take care of your needs pretty well.

In our blog, we tried to educate people about different types of heating and cooling system. Exploring the advantages and disadvantages of your system, you can make a better decision for the maintenance of your HVAC systems.

We are mainly located in Long Island, New York. But our service areas include Hauppauge, Smithtown, Northport, and more. You can contact us to learn more about your system. If you are not satisfied with your heating and cooling systems, you can contact us to enhance the efficiency. We have been in this field for many years, and we earn knowledge in handling different types of your heating system. Contact us for more details.

If you are using a solar heating system, you can enjoy the benefits of energy-saving. There is talk everywhere about using renewable energy sources for your living. A solar heating system can be the best solution that heats the air inside your house and reduces the energy consumption bills. We want to make some important awareness for using the solar heating system. The installation plays a very crucial role. Consult JetAirCo and get the right solution for your heating system. We offer the best heating system service and installation In Hauppauge, Smithtown, Northport, and other areas.

When you select the right size for your heating system, you will get the best support. The solar heating system depends on many factors, including your area, climate, design of your house, and more. You will also experience many problems while installing a solar heating system because the homeowner association will not allow you to install your system anywhere you want.

The heating capacity completely relies on the climate and the efficiency of the collectors. You need an active heating system that offers you 40% to 80% of home heating needs.  If you have a system that offers less capacity than mentioned above, it will not provide any benefits.

A well-insulated house with passive solar heating does not require a big size system. Such houses need supplemental heat that can be produced by any type of heating system. You sometimes need back-up support when your heating system does not work properly. In this case, you can opt for the woodstove or the conventional central heating system for heating your house.

Controls for the solar heating system:

When it comes to controlling, this heating system has a more complex process compared to the other heating systems. They come up with the sensors, switches, or motors to operate your system perfectly. But, the thermostat is the main controller of the system. It checks the heating difference between the storage unit and the collectors.

The control of the system varies, depending on the model. These days, systems come up with microprocessors that optimize heat transfer and delivery. You can contact the best heating system service provider to get the best heating system. They will also help you in installation and the maintenance process.

The maintenance of the solar systems does not need a long process. In the rainy season, rainfall clears the dust and debris on your system. In the dry season, you can clean up your system. Clean your system two to four times per year. You can easily clean up your panels with a leaf blower or a quick spray.

If you want to learn more about your heating system, you can call us. JetAirCo is there to help you, no matter what system you have. We are active in areas like Northport, Hauppauge, Smithtown, and more. We have the main branch in Long Island, New York. Contact us for more details.

The heat distribution system is a complex subject to learn. A home heating system works on different processes to heat the air inside your home. If you have a home heating system and it does not work properly, you can call us and fix your appointment. Our heating experts will visit your place and check your systems. Here, we have explained hot water radiators. If you use the system, this information helps you know better about your heating process.

A hot water radiator is a common heat distributing system, which comes next to the forced-air systems. The design of the system may resemble the steam radiator. The unwanted air in the system is a common problem with the hot water radiators.

You can opt for zone heating to save the energy used in the heating system. Zone heating proves to be the best solution when you have different areas of large rooms. It allows you to manage the temperature of your house smartly by changing the temperature of the zones as per the needs. You can ask your heating experts to install automatic valves for your heating system, which are controlled by your thermostat. You can also use a programmable thermostat to heat or cool a zone automatically, depending on your usage pattern.

If you are planning for the zone heating, you need to pay attention to the insulation also. When a zone that is not in use stays cooler, the comfort problem can arise in the adjacent zone. You can separate the cooler section with proper insulation to retain the best comfort for your house.

Repairing:

If you are using a hot water radiator, the most common problem you will experience is trapped air. Heating experts employ the bleeding technique to remove the trapped air inside of your system. experts open up a tiny valve in each radiator for the bleeding process.

Humidity:

The system does not increase the level of humidity in the rooms. You may need humidity in the dry winter months.

Noise:

You may get a hammering sound or clanging sound from your hot radiator system because of the trapped air in your system.

Energy use:

It is a more energy-efficient option than steam radiators. Since the hot water travels through the pump, the water has a predictable rate.

If you want to know more about the heating system, you can contact us. JetAirCo has been a reputed heating service provider, offering heating system maintenance and repair in Smithtown, Hauppauge, Northport, and other areas. No matter which type of heating system you have, we will offer the best solution. We have a branch in Long Island, New York. Contact JetAirCo for more details.

With radiant heating, the system sends heat to the floor, the panel, or the house’s ceiling. The system works on the radiant heat transfer by delivering heat from the hot surface to the people and the objects, using infrared radiation. When the system is on your floor, it is called radiant floor heating. If you want to know about the best heating system, you can contact JetAirCo. The company has a wide presence in New York and offers heating services in Hauppauge, Smithtown, Northport, and more.

Radiant floor heating benefits you in many ways. It is more efficient than a baseboard heating system and forced-air heating system as you can avoid duct losses. If people have allergic symptoms, they choose the radiant floor heating over the forced air system.

The hydronic system also uses little electricity and proves to be the best option in areas where electricity prices are very high. Besides, the system also uses a wide variety of energy resources, including standard gas or oil-fired boiler, wood-fired boilers, and more.

The radiant floor heating depends on the natural circulation of the heat in a room. The warm air rises higher from the floor, and the cold air is heated when it comes close to the hot surfaces. The radiant floor heating is different from radiant panel heating.

If you need any suggestion for your home heating system, JetAirCo has always been there to solve your queries. If you need heating system repairing and installation services, you will get a quick response from us since we know comfort is important for you. Call us to get more details about our heating services.

You will get three types of radiant floor heating – radiant air floors where the heat-carrying medium is the air, electric radiant floor, and hot water radiant floors. These types also get further categorization according to the installation process – wet installations, sandwiches, and dry installations.

Air-heated radiant floor:

Air cannot carry a large amount of heat, and it is not cost-effective in residential applications. It can be combined with the solar heating system.

Electric radiant floors:

The electric radiant floor contains cables. Electrically conductive plastic will be laid below a floor covering.

Hydronic system:

It is the most common and cost-effective solution. The methods of installing electric and hydronic radiant heating system are similar.

Our experts will offer you the best tips for your heating system. Contact JetAirCo and find the right solution for your heating system. We have a team of experts who will visit your house and conduct thorough research about your heating system. We offer services in Hauppauge, Smithtown, Northport, and other areas of New York.

Using ductless systems will give you many benefits for your heating and cooling. If your winter energy bill is too high to bear, a ductless system can be your solution. Besides, the unit fits in your home decoration very well and offers you maximum comfort in any weather. But, consulting with an experienced HVAC service provider is necessary because only professionals can help you find the best systems for your needs. If you have decided to replace your system with a ductless system, JetAirCo can solve your queries and will offer you a cost-friendly way to do this. We offer HVAC repair and maintenance in Hauppauge, Smithtown, Northport, and in other areas of New York. If you need any immediate service, you can contact us anytime.

A ductless system saves your energy, and it reduces your expenses also. It makes you feel better when you use the system because you will get comfort within your budget, which every homeowner wants. It also helps you contribute to the initiative for saving energy that protects the environment.

The systems come at an affordable price, and they can be easily installed under the ceiling or on the wall. The best thing is that the systems come in very elegant designs that do not look mismatch with your home ambiance. For winter and summer, ductless systems work perfectly.

Although ductless systems have many advantages depending on your needs, the system has some specific benefits on certain occasions, and they are mentioned below:

If your house has a new addition as garage departments or sunrooms, you can opt for this system. Unlike ducted systems, it will not steal air from other rooms.

If you want to create an independent temperature zone, a ductless system proves to be the best option. Although you can create a temperature zone with the ducted system, it helps you easily maintain it.

With a ductless system, you can better control the temperature in your house. You can also decide the temperature for the room that is not in use. Shutting HVAC grills in the traditional HVAC systems will not offer you the best benefits.

So, ductless systems have many benefits if you pick the right option for your house. Contact JetAirCo for the HVAC maintenance services. We offer Heating Installation & Repair in Hauppauge, Smithtown, Northport, and other areas.

Give us a call to analyze your environment and what type of system will serve you the best demands. Our experienced professionals will consider each and everything for your home, and we help you with the best ductless system for your comfort. To know more about us, please visit our service pages.

We are in the deep wintertime. The outside temperature is freezing, and you are looking for the best comfort to feel the coziness inside your house. This is the time when your system runs harder, and many households experience a sudden breakdown of their system. Behind this sudden stop, there are many reasons for it. The lack of maintenance comes first in mind. If your system runs with a problem, you can call us and book an appointment with our experienced heating system professionals. We offer heating system maintenance and repair services in Smithtown, Northport, Hauppauge, Long Island, and other areas.

In this winter season, if your heating system does not offer you sufficient comfort, you can follow some important things to fix the problem. If it is a technical error, you can contact a professional for this. We are always ready to visit your place and fix the problem.

Set the right temperature:

The right temperature always helps your system work perfectly. You may set the temperature at a 76-degree Fahrenheit, and you think it is a reasonable temperature. But, according to the department of energy, you can set the temperature to 68-degree Fahrenheit during the daytime and slightly lower than this during your sleeping time.

You can use a programmable thermostat for setting the right temperature for your living. This thermostat allows you to set the temperature according to your use, lowering the energy loss issue. This step will also decrease your energy cost and helps you save more.

Air filter:

Replace your air filter often if you want to enhance the longevity of your heating system. The more your system runs without air filter replacement, the shorter the life span of your system will be. Your air filter plays a very important role in protecting your system from the damage caused by contaminants. For an uninterrupted warm airflow, replace your air filter often.

Maintenance:

Many households believe that they make too late for the maintenance, and their system is not in the position of repairing. Until your system completely breaks down, you can repair your system. Call us and find out whether there is a way to fix the problem or not. Our experienced professionals will visit your place and check everything. We offer heating system maintenance services in Smithtown, Northport, and Long Island. Visit us to know more details.

Unblock the vents:

If you think blocking the vents of the room you do not use will give you better comfort, you have a misconception. It makes your heater work harder as the reading of your thermostat is not accurate. For anything regarding your heating system, you can call us. JetAirCo is a trusted heating and cooling system repair and maintenance service provider in New York. We have an experienced team that spent years in this field. Contact us to know more.

Your HVAC systems make your living comfortable and beautiful. But, when you have invested in the wrong system, it will make your experience disappointed. You may not get the right temperature, and your expenses go higher and higher every month. If you are not happy with your system, you can consult with an HVAC professional near you. They will guide you buy the right heating system for your work. JetAirCo can help you find the right answer for your heating system. We have been in the service for many years, and we offer HVAC service in Northport, Hauppauge, Smithtown, and more.

When you install the correct size, it benefits you in many ways. You will get proper functions and can cut down the energy cost also. When it comes to the comfort level, your product will offer you the best support.

Noise is another factor that your HVAC system makes. But, when you have the right size system, you can reduce the noise level also. The only way to know the right heating system for your house is by hiring an experienced heating system service provider. You can contact any name near you and have them by your side when planning for your system. We suggest you go for the experienced name because it needs the knowledge to analyze the heating system and installation.

Professionals do the measure in the square footage. Besides, other things are also important to know your system’s right size, and they are windows, insulation, and age of the home. Do not buy a too large system for your heating. It does not benefit you.

When you invest in the oversized furnace, it goes on and off frequently. This short cycle causes hot and cold spaces in your home. Besides, it causes too much noise which disturbs your peace.

Check the AFUE rating when buying a heating system. AFUE is Annual Fuel Utilization Efficiency. It measures the efficiency of your furnace. The minimum rating is 80%. But, you can opt for the higher efficiency rating also. The high-efficiency rating is between 90%-98%. Its upfront charges are higher, but you can save money in the long run.

Let a professional decide which option is the best for you. JetAirCo has always been there to meet your demands. You can contact us anytime to fix the HVAC issues. If you want the best heating system for your home, we are ready to serve your demands.

Knowing your furnace always helps you take care of your system in a better way. Not all furnaces work the same. This is why you need to check the AFUE (Annual Fuel Utilization Efficiency) of your system. The higher the efficiency, the better your system works. If you need any help for maintaining your heating system, JetAirCo offers you the most satisfying service that quickly solves your heating system problems. We have an experienced team for your system maintenance. Since we have been in the fields for many years, we have earned the knowledge of handling different technologies. You will get the best heating system maintenance service in Smithtown, Long Island, Northport, and other areas.

Nearly every furnace has similar features, and the numbers go high or down as per the price. If you use a gas furnace, we have mentioned your furnace’s key factors and how they work. This detail will help you know more about your furnace.

Variable speed blowers:

Variable speed defines the furnace’s fan motor, which has a different speed to control the furnace’s heat.

Blower motor:

The blower motor helps the warm air passes through the ducts. It takes care of the cycling air process.

Air filtration:

With air filtration, you can improve the air quality coming from your furnace. An electrostatic filter is attached to your system to trap particles.

Heat exchanger:

In a heat exchanger, the air gets heated.

Venting:

Venting is a significant part of your furnace. It has pipes from the furnace to the outside, allowing the gases to go out of your house.

Zoned heating:

This heating system creates different zones or areas in your house for the heating. You can control these zones separately by using a thermostat. If you have a large home, the zone heating proves to very effective for you.

Your HVAC system enhances your comfort inside your house. So, they have a role to play in your happy life. If you experience any problem with your system, call JetAirCo. Issues in your HVAC systems can put your life in danger.

JetAirCo offers heating maintenance service in Smithtown, Northport, and in other areas of New York. Consult with our experienced professionals about your heating and cooling system.

Sometimes, your system just wants a replacement. You cannot detect the need because you are not aware of the problems your system may go through. An aging system is better to be replaced than repaired. There are some signs that your system gives before its complete breakdown. If your system needs frequent repairs, you can search for new systems.

If the energy bills are increasing every month, it denotes a problem with your heating system. You can have us checked the system to find out problems. Call JetAirCo for more details. We are always ready to serve your demands.

Using the right thermostat can help you save your energy consumption. If the HVAC systems constantly increase your energy consumptions, you can follow a few tricks for your home heating or cooling system. Your thermostat plays a vital role here. JetAirCo is an experienced name for your HVAC system service. If you need any maintenance service for your work, our experts provide you the best support.

Let’s take a look at how you can reduce your energy cost by setting your thermostat at the right temperature. You can save 10% a year by adjusting the temperature by 7-8-degree Fahrenheit. It does not cause any big changes in your comfort, but you will get the best benefits. If you want to consult with us for your heating system maintenance and service in Hauppauge, Smithtown, Northport, and in other areas, you can contact us.

In the winter, you can set the temperature at 68-degree Fahrenheit when you awake. Set the temperature lower when you are away from your home. In the summer, you can also follow the same thing with your air conditioning system. When you are away, keep the temperature higher than normal. Set the temperature at 78-degree when you are at home, and you need cooling.

Set the temperature as high as possible by considering your comfort level and the humidity system. Remember that the smaller the differences between the indoor and outdoor temperature, the lower your energy cost will be.

We have experts who can provide you the best knowledge for using and maintaining your HVAC systems. You can contact us and get the right solutions for your heating and cooling systems. We have the main branch in Long Island, but we are active in Smithtown, Northport, Hauppauge, and more.

Using a programmable thermostat reduces the discomfort of setting the temperature often. Nowadays, you will get a smart thermostat that reads your usage patterns and set the temperature accordingly. Having a professional HVAC service provider by your side is necessary for you. They are experienced enough to lead you in the right direction. Contact JetAirCo and get the best service for your company.

In the summer, do not set the temperature lower than normal when you turn on your air conditioner. It does not bring down the temperature of your house quickly. Rather, you will increase your energy lost. Many people have a misconception that a furnace works harder to offer a comfortable temperature after it is set to have a normal temperature. If your temperature is higher than the outside, it has a higher chance of temperature loss.

If you want to know more about your heating system, JetAirCo has always been there for you. We come up with the details that you need for your heating or cooling system. If you think that your HVAC system does not perform satisfyingly, you can contact us anytime. We will reach your place as soon as possible and offer the best solution to restore your comfort. We offer heating and cooling services in Hauppauge, Smithtown, Northport, and more.

Everyone wants to have the most efficient home heating system for the house. It not only cuts down your energy cost but also keeps your environment safe, especially from the carbon footprint. If you want to buy the best heating system for your house, call a professional for advice. Remember that taking help from an HVAC professional service provider will always benefit you. Installing your heating system needs expert knowledge. So, hire a company that can help you find the best heating system for you.

JetAirCo is an HVAC service provider that fixes your problem quickly and enhances your home comfort in the best way. The company has a wide presence in areas like Hauppauge, Smithtown, Northport, and in more areas of New York

Choosing the right heating system is a necessary thing for your house. An HVAC expert can give you the right decision when it comes to the home heating system. There are various factors that determine which type of heating system you need.

As a buyer, you can gather knowledge about the efficiency rating of your heating system. AFUE (Annual Fuel Utilization Efficiency) is the measure that determines the amount of energy that is used by the heating system.

If you use a heat pump, HSPF instead of AFUE measures the efficiency of the heating system. SEER ratings are for measuring the efficiency of the heat pump in the cooling mode.

JetAirCo can help you get the best heating system for your home. We have a branch in Long Island, New York. But, our active areas are vast, including Hauppauge, Smithtown, North Port, and more. Our experienced heating system provider will visit your place and analyze your requirement to determine the best system for your space.

Picking the right type of heating system mostly depends on where you live. The climate is an essential factor for your heating system. We also consider your house built to choose the best system for you.

Heat pumps and furnaces are the two primary types of heating systems for residential use. We describe these systems to offer you a better idea of energy efficiency.

Heat pumps:

Heat pumps move the air using different methods to keep your house warm or cold, depending on your needs.  Air-source heat pumps bring down the temperature with the help of refrigerant. When you use the system in the heating mode, it extracts heat from the outside air. This type of heating system will work efficiently if you have moderate weather. But in freezing climates, this heating system does not work efficiently.

A geothermal heat pump uses the soil or water source to capture or release the heat. It is more efficient than the air-source heat pump. It reduces energy consumption and saves energy costs. But, it requires a higher installation charge.

Furnaces:

Furnaces are a common type of heating system. You can use gas, oil, or electricity to run your furnace. Gas furnaces are the cheapest ones, but they are not as efficient as air-source energy or electric furnaces. Check the AFUE rating and pick the higher one for better efficiency. JetAirCo will make your task easier by offering the best system for your house. We check your requirement and come up with the best system. If you need heating system services in Hauppauge, Smithtown, North Port, you can contact us. We will reach your place as soon as you contact us.

The maintenance of your heating system is not tough. If you want uninterrupted heating during the winter season, you should pay attention to your system. Hiring a professional for maintenance is the best thing you can do. They know about the technicalities of your system and they perform their job effortlessly without any mistake. JetAirCo is a heating service provider in Hauppauge, Smithtown, Northport, and in more areas.

Replacement of your heating system will make a big hole in your pocket. To avoid the issue, you can opt for the occasional tune-ups. Sometimes, modifying your system will give you better choices for saving. JetAirCo can help you check your system and modify it so that you can save energy as well as electricity consumption. The company has a trusted presence in New York as an HVAC service provider.

Combustion testing is one of the major processes for the maintenance of your heating system. You need an experienced name to carry out the process. Your hired professional will test your combustion efficiency two times – one before the tune-ups and another is after the tune-ups.  The result will be shown to you. Professional will check whether the combustion efficiency is 75% or not. If the tune-ups do not provide the same efficiency, you must replace your system.

The two main low combustion efficiency measures are – incomplete combustion of fuel and excessive-high flue gas temperature. When you are told that your system has a high flue gas temperature, it means that heat is lost without any use.

The affiance of your heating system also depends on the percentage of carbon monoxide or oxygen. Carbon monoxide is the end product of fossil-fuel combustion. Too little carbon monoxide denotes incomplete combustion. For the oil burner, the percentage should be 10 to 12. For gas, it is 7 to 9%.

Smoke also means a lack of combustion, and it is not present in the gas system. For the oil system, the smoke does not rank higher than 1 in a 0 to 10 scale.

Remember that carbon monoxide gas is harmful to your health and the recommended limit for the flue gas should not exceed 400 parts per million.

Only a professional can check all of these things for your heating system. So, Hire JetAirCo and let them figure out important things for your systems.

Cleaning needs special attention because different types want different handling from a professional. You need to choose a name that has years of knowledge in installing, repairing, and maintenance of different types of heating systems. When it is an oil-based heating system, an HVAC company cleans the burner, combustion chamber, oil line filter, and flue pipe. Other systems need cleaning for the heat exchanger surface. Oil nozzles and filters are replaced with the new one, and these parts are hardly cleaned by professionals.

JetAirCo can easily maintain your system. If you live in New York, the company will not take much time to reach your place. They analyze your system and fix the issue immediately. Call JetAirCo or visit Long Island, New York for your heating service.

If you are using a heating system, you can take care of so many things to keep the warm inside and to use the heating system properly to the maximum. Here, we discuss some easy tips that help you manage the heating system very well and you can also reduce the cost of the system. If you need any help to maintain your heating system, you can call JetAirCo. The company is offering services in Hauppauge, Smithtown, North Port, and Long Island.

No matter what type of heating system you have, you will get the best solution from the expert. When you maintain your heating system, it will provide you a comfortable environment as per your requirement. JetAirCo is a known name in New York since they offer help and solutions for your heating system without wasting time.

Here are a few tips that you can follow for using your heating system for the best:

Understand your heating system and control it rightly:

You must learn how your heating system works and then pay attention to the process of how you control your system. This is one of the best ways for maintaining your system. If you know the proper way to control your system, it has a huge return in terms of saving your energy, lowering the operating costs, and more. So, learn to control your heating system properly.

Turn your thermostat down:

Even 1 degree down from the set temperature has many benefits, especially in saving your energy consumptions. Check your thermostat and set your temperature properly.

If you feel that your heating system does not offer you a comfortable environment, you can contact JetAirCo and opt for professional maintenance. They are knowledgeable about every part of your system. They will find out an exact cause of the faults and solve them accordingly. Contact jetAirCo and opt for the professional checkup of your system.

Don’t put your clothes to dry on the radiator:

This reduces the heating efficiency of your radiator. Your system does not understand the right temperature to offer and it consumes more fuel to generate heat. So, do not dry your clothes on radiators.

Let the sun rays in:

If it is a sunny day, you can use the natural heating source to keep your room warm. It saves your energy consumption a lot. It is good for your health also. So, open doors and windows to let the sun rays into your house.

Insulate your door furniture:

You must insulate your door furniture to keep warm into your house. Cover the letterbox and keyholes so that there will be no escape way for the warm air.

If you are looking for professionals for repairing your heating system, you can contact JetAirCo. The company can help you with the real solution. No matter what the problem is, an experienced heating service provider will visit your place and fix the problem without taking much time. They have a branch in Long Island, New York, but they are operating widely in areas like Hauppauge, Smithtown, Northport, and more.