Heat pumps are a common system that can offer you both heating and cooling. You can use the system in winter and summer also. But, a heat pump is not for extreme weather. The system will provide you enough heating and cooling if you live in moderate weather. Leaking in the heat pump is very common, and you can avoid the issue by maintaining your system properly. But, if your system develops a leak, you can leave the responsibility to the professionals. JetAirCo is offering Heating Systems Maintenance Services in Smithtown, Long Island, Northport, and other places of New York.

A heat pump has a reversing valve that changes the flow of refrigerant as per the need. It includes a complex process of heating and cooling because one system takes care of both conditions. Depending on your requirement, the heat pups either release heat inside or outside of your home.

Heat pump leaking does not cause an immediate situation. But when you start ignoring the issue, it causes water damage related problem in your house and in the system both. If your system has stagnant water, it damages the inner parts of the system. If you experience a short-circuit problem, it causes a big expense. So, here are some reasons that cause heating leakage.

Drain issue:

The problem is to drain the excess moisture. The condensate water collects in the condensate pan, and the water then drains away from your heating system, using the drain line. If your system gets clogged, it cannot send the moisture to the drain line. Instead, the system overflows the water. If the condensate pan is fixed correctly, it causes the leakage.

You can check your condensate pan on your own to find any blockage. But, finding mold in the system needs a professional service. JetAirCo is offering heating installation and repair in Hauppauge, Smithtown, Northport.

Dirty coils:

Cold evaporator coil collects the condensation from the indoor air and then drains it into the pan, which leads to another drain. If the coil gets clogged, it stops functioning and spills the water on the ground. To avoid this problem, you need to ensure that the coil gets often cleaned just like your air filter. Hire a heating system service provider to perform this task. JetAirCo has always been there to enhance your comfort level in all weathers. We have an experienced team that visits your place and analyzes the situation properly. Call us to know more.

Cracked overflow pan:

In the cooling process, your heat pump collects heat moisture from the indoor air and collects it on the overflow pan. If the pan gets cracked, the water drains.  You will experience a large amount of water pooling on the ground.

JetAirCo is offering the best services for your heating system. If you want any help from us, please contact us for more details. 

A heating system will satisfy your needs when you choose the right system for your space. There are a few factors that you need to keep in mind while buying for a heating system. We talk about the efficiency of the systems and how you can choose the best ones. Everything depends on the technicalities of your heating system, and for this reason, you must contact an experienced heating system service provider. Contact JetAirCo and get the needed help for your heating system. We are a popular name for heating installation and repair in Hauppauge.

If you are looking for the best-centralized heating system for your house, you must consider the efficiency standard for your heating. We are discussing it in detail here.

Four criteria help you judge the efficiency and they are:

Fuel-burning Efficiency:

This involves flame efficiency. It checks the amount of the chemical energy in the fuel that gets converted into heat.

Steady-state efficiency:

It is also called combustion efficiency. It checks the heat transfer from the heat exchanger to the fluid. This checks the fuel-burning losses and chimney losses.

Actual Fuel Utilization Efficiency (AFUE):

This efficiency system checks the exact amount of fuel used by the system, accounting fuel-burning losses, chimney losses, stop/start cycling losses, and heat loss through the heating system.

Seasonal efficiency:

It measures the distribution loss in the duct walls.

Seasonal efficiency is the most reliable one for your heating system because it covers most areas of your heating system. But AFUE is the most used one. Those who buy a heating system always check the AFUE before buying. This rating system is labeled in your system also.

Get help from an experienced HVAC service provider for your heating system. They install your system in the right place and they help you use your system in the best way.

You can identify the working ability of your heating system with the AFUE. If you have an older, low-efficiency system, it uses a natural draft for bringing the combustion air but not in a perfect way. Here, the loss of combustion gasses happens through the chimney.

The low-efficiency system employs the combustion pilot light that burns fuel even without the need of the space. This system is bigger and heavier, and they lose energy in the extra cycling process.

A mid-level heating system comes up with the exhaust fan that channelizes the combustion air in the best way. It also includes the electronic ignition that eliminates the need for the pilot light, offering you more customized options for using your heating system.

The high-efficiency heating system can condense the flue gases to re-use the lost heat in the system. This is the most efficient one. Find the best HVAC system service provider for your heating system. You can contact JetAirCo and hire the best service for your system. We have the main branch in Long Island, New York, but we are offering services across New York.