Gas Furnace Repair Services Northport Archives

When the temperature starts dropping, one of the most important tasks comes from Heating Maintenance services. Therefore, here we will focus on the main points on that.

If you are living in an area where winter is approaching and the temperature is falling, then it is the right time to get support for the Heating Maintenance services at your house. Because this is the only way you can get the comfort of a warm home during winter.

For this purpose, you can get help from JetAirCo. They will provide services like Furnace Repair Services Northport and Gas Furnace Repair Services Northport. Contact to know more.

This time, one vital task for your house is to repair the fall furnace and check the system is working well or not. If you need any kinds of help from professionals, seek help as soon as possible in order to keep the furnace safe.

Although it is also important to have an annual check for the systems, especially when the furnace reaches the age of three years, there are certain things that you need to remember for the furnace. So, here we will get to know them better.

Checking the Thermostat:

As a house owner, you need to check some certain things about the thermostat. At first, make sure that the thermostat is set to the mode of heat or not. Then, go for checking that the temperature is set to the desired level or you need some changes there.

After that, go for setting the temperature at the right level and check for its activation. Finally, check once that it is working properly inside the furnace. For this, you can set the switch to below heat the raising to a higher level.

If you witness any kind of issues in your furnace, call JetAirCo. They will help you to make it well function even if you need any assistance for the Oil Burner Service Northport.

Checking for the power:

The main working of the furnace depends on the electricity power. Whether it is a natural gas furnace or anything else, make sure that you check the power well beforehand you start the furnace.

At first, set the power switch to the On mode, and then check the circuit breaker. After that, keep watching that the furnace is working or not. If the switches run off immediately, check the circuit breaker again. You can take help from a service center too.

Checking for the Pilot Light:

The pilot light is a vital part of the system. Generally, as a house owner, you should place the light behind the door, mainly near the furnace base. The light helps to ignite the fire source.

So, if the light stops working properly, you can use another light source in order to kindle the light. A grill ignitor comes to your help. But if you fail to lit it properly, do seek help from a Heating Maintenance services company.

JetAirCo provides help in furnace repair, oil burner repair, and gas furnace repair services in USA. Contact them to know more about their service and keep the furnace of your house working well.

Your furnace keeps your home warm and comfortable for you. In winter, the demand goes higher, and it works harder to meet your requirement. Your furnace may get broke down suddenly, or it may reduce its performance. You must not wait for anything and can call a professional to check your heating system. But, some minor cases can lower the performance of your system or can stop the system from heating your home. Here, we will discuss things that you must check for your furnace repair. For any furnace repair services, you can call JetAirCo, the company trusted by happy clients for their prompt services.

Check your thermostat:

Checking your thermostat has become an obvious thing. Many house owners called us for the furnace repair, and we later discovered that the issue was the thermostat setting. This is a minor thing that you can check on your own. Make sure that your thermostat is in heating mode before calling us.

Filter issue:

A filter plays a very important role in your heating system. It filters the air that goes into the system, and it also filters the air that goes out of the furnace. So, clogging or any obstruction in filters can reduce the efficiency of your furnace, and there will be a risk of overheating. Maintenance is the key to keeping your system in perfect condition. Choose the best Furnace Repair Services for your home to improve the performance of your furnace.

Check batteries:

Although some thermostats are connected to the home’s electrical system, some thermostats use batteries. You must know how your thermostat works. If it uses batteries, you must check them. Sometimes, changing the batteries only will solve your furnace issue. For anything else, you can consult with JetAirCo, a renowned company for offers the best heating and cooling services.

Check the power issue:

If your furnace runs on electricity, you must check your thermostat fan switch. It usually stays in the auto or on mode. The Auto means that the fan will turn on when the furnace is on. You can also turn the switch to ON by troubleshooting the problem. If your fan starts, you can ensure that the power is not the problem.

Call jetAirCo to get the best heating system service for your home. Our experts will repair your furnace, no matter which type you have.

Circuit breaker:

You can check your home’s circuit breaker and find out the circuit that controls your furnace. You may need an expert to handle this. If you are not a very technical person, consult with the best heating repair services to find the right solution.

Furnace switch:

Your furnace has a special switch which looks like other switches. Check whether the switch stays on or off. Since the switch comes unlabeled, you need to find out it. The best way to maintain your heating system is to call a professional. When your system gets maintained, it does not cause any issues also. Call JetAirCo to learn more about your furnace. We offer Furnace Repair Services to help your system.

When you are maintaining your gas furnace, you can use your system for a long time. It does not need replacement and repair, and you can save your money. If you think maintenance is tough for you, call HVAC experts. JetAirCo is a renowned name that takes care of your HVAC systems perfectly. You can consult with us and hire our experts to solve your heating system. If maintenance does not improve the condition of your gas furnace, you can choose gas furnace repair services. Please call us to know more.

Here are some tips that you can follow while maintaining your furnace:

Work under a safe condition:

Safety always comes first. Before you start cleaning your furnace, turn the power system off. You must also check the gas leak before your cleaning. The gas leak is a dangerous issue, and it can cause a severe, fatal accident. If you identify a gas leak, you must stay away from it and call an expert to fix the issue. Immediately vacant the place and wait until the problem gets fixed by a professional. You can call JetAirCo and let them check your heating system. They are experienced in the field and offers the right solution for your heating problem.

Clean and repair the filter:

It is a major part of a gas furnace as it blocks dirt outside of your system, keeping it clean. You must replace or clean your filter frequently to keep the system perfect. The filter can accumulate dirt and debris, which can reduce the functions of your gas furnace. You must replace a completely clogged filter. You must change the filter to keep your gas furnace always active.

Call JetAirCo if you need any help. We have the best experts who will visit your place and perform the replacement or maintenance works.

Check the thermostat:

Your thermostat may also have problems, especially when you use it for a long time. Your thermostat may also need replacement. Check your thermostat to ensure that it is working properly. Replace it if needed.

Clean the blower:

After cleaning the filter, you must check the blower next. The blower stays next to the filter in the heating system. It can also collect dirt that penetrates through the filter. You can clean the blower to remove the accumulated dirt. For accessing the blower assembly, you need to remove the panels first. You can use a damp cloth for cleaning the blower. For other details, please visit our official website. We have discussed so many things in our blog sections about your furnace.

Clean or repair furnace ducts:

Furnace ducks can easily be damaged, especially when you use a forced-air furnace. you need to clean the ducts with a high-power vacuum cleaner. You can call JetAirCo to get this job done. Cover all ducts to prevent the air leaking issue. If your furnace needs repair, you can opt for the Gas Furnace Repair Services at JetAirCo. Contact us to know more details.

A thorough inspection will always be helpful when it comes to the maintenance of your gas furnace. Hire an expert who knows everything about your furnace and offers the right solution. Call JetAirCo and know about your furnace more. Consult with us for more details. We also offer gas furnace repair services in New York.

If your furnace is not working, your winter is a nightmare. The cold breeze will spoil your luxury. The time has come to concentrate on the performance of your furnace. Winter is approaching you very fast, so uncover your furnace and hire the best furnace repair services for your system. It needs to be checked and analyzed. Call JetAirCo and get the best experts for your system. If you need a quick service, please visit us to know more.

It is important to know how your heating system works. Here, you will get complete information about the working of your furnace. You will learn a step-by-step process for maintaining your thermostat.

Check your thermostat first:

You must check your thermostat first. Although it seems silly, many homeowners make mistakes in thermostat settings. Many people make service calls without checking their thermostat.

Here are a few things you can check:

Check your battery on the thermostat
Open your thermostat and clean the dust and debris
Make sure that the date and timing is correct
Check the breaker

Reset home service breaker:

When your furnace is not producing heat, checking the circuit breaker is also an option. Make sure that thermostat is set to heat. Change the temperature to feel the noticeable difference. You must check the home breaker’s panel and find out the circuit that controls the furnace. You can test the breaker manually. If you think it is too technical, you can consult with the furnace repair services. JetAirCo will offer you the right solution for your furnace.

Change your clogged filter:

When you have poor furnace performance, you can check your thermostat also. Clean your air filter, which is an essential part of your home furnace maintenance. It is also the easiest maintenance tip for you.

Replace your furnace filter and enhance the longevity of the system. three steps that you can perform for keeping your filter clean are:

Locate your filter
Check your filter
Replace your filter

Safety switch on your furnace:

These tips all do it yourself tips, but you can ask a professional if you are not aware of different technical parts of your system. JetAirCo offers furnace repair services in New York. You can consult us for maintaining your heating system.

If your furnace is stopped working, you must check the safety switch of your system. When the furnace door is removed, the safety switch is popped out. You can activate the switch by placing the door in the right place.

Keep the surrounding area of your furnace clean:

You need to ensure that the area of your furnace should be clean. There is no inflammable item around your furnace. A clean furnace always functions better. If you keep things around your furnace, it will increase the chances of fire damages.

There are many things that you can perform to maintain your furnace. It will be tough to cover everything in one blog. We will discuss the rest of the maintenance tips in another blog.

If you need any help, you must call us. JetAirCo offers furnace repair services in Long Island, New York.

A furnace is the common heating system source of many households. If you want to keep your heating system in perfect conditions, you must contact an HVAC service provider. They have the professional knowledge to maintain your system smartly. You require HVAC services for your furnace routine maintenance. Many call a service provider after their system gets damaged. But, you need to take care of your system before it completely stops working. Hire JetAirCo service provider and stay relaxed about your heating system. We offer HVAC maintenance services in Smithtown, Northport, Hauppauge, and more.

What does furnace maintenance include?

Furnace maintenance should be taken care of by a heating professional. We check all components and perform adjusting, cleaning, testing, and lubricating of the parts. You will get a complete service from us.

Vent systems and air intake grills are the parts that need cleaning to reduce any blockage. We inspect those parts and clearer everything. We check the heat exchanger to find out the damage and protect it from corrosion. Removing debris from blowers, we keep your system clean and improve your air quality.

The other parts we check are:

Blower motor and its amp draw
All electrical and damaged wires replacement
Burner and flame sensor
Thermostat calibration
Moving parts lubrication
Air filter checking
System safety control and start-up cycles

For oil and gas furnaces, we offer some extra care to keep your system perfect in condition.

Checking fuel lines for identifying leaks.
Gas pressure testing, burner, and the pilot.

How often you need furnace maintenance?

You can opt for the annual furnace maintenance since it reduces all the damage-causing problems and helps your system run perfectly. If any of your house members have asthma or any respiratory problem, you must get your system checked at least once a year.

The ideal time for your system maintenance is before the cold season. Call JetAirCo for your heating system maintenance in Smithtown, Northport, and other areas. We offer prompt services to solve your heating system maintenance. If you live in New York, you can easily connect with us.

If you maintain your heating, you will get many benefits. Saving money comes first on the list. It is very obvious. A perfectly well furnace also runs effectively without consuming extra energy. Besides, you can also avoid sudden breakage, which needs costly replacement.

Some heating system manufacturing company mentions that only routine check of the system keeps the warranty terms valid. It means that if you maintain your system properly, manufacturers will cover the cost of any damage that happens under their warranty terms.

If you need heating maintenance services, contact JetAirCo. We are active in Smithtown, Northport, Long Island, and other areas of New York. Please visit our official page for more details.

Homeowners installed a furnace system to warm their place via the intermediary fluid movements, which might be hot water, air, or steam. An American study proves that a forced-air system is the 3 rd popular heating system in New York.

So, have you decided to buy a new furnace heating system for your house? Or want to upgrade your current system with a furnace? Then you can hire JetAirCo Furnace Repair Services. So, consult our professionals if you stay near the areas of Hauppauge, Smithtown, Northport, and Long Island, New York, and achieve everything related to your furnace. Besides, here we also discussed some vital aspects that you must consider before purchasing a furnace.

Necessary Things To Check While Buying a Furnace System:

Here, JetAirCo will prepare a list of the essential aspects you need to check before purchasing a furnace system for your home requirements.

1. Age of the Ductwork:

Updating your heating unit might not be sufficient to acquire the utmost efficiency of the heating system. Therefore, you often need to replace your air ductwork. So, before you purchase a new furnace, ensure that your existing air ductwork is compatible with the new heating system. However, the best way to perform the task is to hire JetAirCo Gas Furnace Repair Services to analyze the air ductwork condition and choose the best one for the new furnace system.

2. Climate:

Bear in mind, the cold weather intensity in your home can negatively affect the heating system type you select. As per JetAirCo professionals, the chilly the temperature is, the more effective the furnace system will be. Remember that choosing the best heating system will be essential as an inappropriate furnace can significantly increase your monthly electricity bills.

3. System Efficiency:

Do you know that almost 10% heat loss during energy conversion? However, as per Energy.Gov, a solar system is the most efficient option to make your home warm. Unfortunately, you can’t install a solar panel in every place as some areas don’t have plenty of the sun’s rays in their home. However, as an alternative, people often use a furnace heating system that might provide hot air in an eco-friendly way. So, if you want to add a furnace to your place, try JetAirCo Heating Systems Services. From us, you will get our assistance at every step.

4. Size of Your House:

If you wish to achieve the right temperature for your home, it’s necessary to consider the square foot area of the rooms you want to cover up. However, when you visit the market, you will see that each furnace model comes with different guidelines. Besides, you might also need to check the wall and ceiling conditions of your house. Undoubtedly, the manufacturer guidelines can help you to pick up the best heating system for your home. However, it can’t be the ultimate solution. Fortunately, if you consult with JetAirCo Oil Furnace & Boiler Repair service, our experts can help you decide the best furnace system for your purpose. Apart from this, if an issue arises, our technicians will thoroughly analyze it and fix the problem shortly.

Bottom Lines

You need to spend thousands of money to purchase a furnace system. Therefore, if you stay in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Service and seek our assistance to achieve your home needs.

A boiler system is the 2nd popular heating system in New York after the HVAC system. As per 80% of New York citizens, a boiler can significantly adjust the house temperature during the too cold climate. But the problem is, there are many boiler systems available in the market, and picking up the best one will not be a cup of tea. Fortunately, JetAirCo Boiler Installer service is here to hold your hand. So, if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York, consult our experts at any time a day or night. Besides, JetAirCo also discusses some best-recommended boiler systems that you can use in 2021 and the future.

1. Slant-Fin Sentry Boiler (Consumer Rating 4.7)

It’s a gas hot water boiler with an efficiency of 84.4% AFUE. The Slant-Fin Sentry boiler comes with several advanced features, including a LED display to monitor water temperature, a pre-purge option to absorb heat, and others. This gas boiler system is available in five sizes. However, if an issue occurs while operating your heating system, hire JetAirCo Boiler repair service and fix your issues.

Pros:

As per homeowners, it’s the cheapest boiler.
Customers review that the boiler is quite effective.
Many owners state that a Slant-Fin Sentry boiler lasts more than any other heating system.

Cons:

According to many homeowners, this is a bulky boiler and takes too much space.
This boiler often takes longer to create hot air.

2. Lennox GWE-IE Boiler (Consumer Rating 4.8)

The Lennox GWE-IE is a gas modulating water boiler with an efficiency rating of up to 95% AFUE. Advanced features, including an electronic ignition switch, sound reduction, can be found in this boiler system. Besides, the mesh burner is corrosion resistant, and the heat exchanger tube is self-cleaning. As per a 2019 study, the Lennox GWE-IE Boiler can reduce up to 50% energy cost than conventional boilers.

Pros:

This boiler system can run automatically.
Several homeowners reported that this boiler system could significantly reduce your monthly energy bills.
The boiler system could deliver up to 95% efficiency.

Cons:

Costly purchase price
One study claimed that the boiler unit needs continuous repairs, which can be expensive. However, if you call JetAirCo Oil Furnace & Boiler Repair, you can instantly resolve all your boiler system-related issues at the earliest time.

3. Slant-Fin Galaxy GXHA Boiler ( Consumer Rating 3.9)

It’s a gas-fired high-performance steam boiler system with an efficiency rating of 81.3% AFUE. The Slant-Fin Galaxy GXHA boiler comes with an optional tankless heater, a monitor display, and an intermittent pilot ignition to control the system function. Besides, it contains a specially made speed skimmer that releases loosen particles and dust via drain faucet to deduce periodic cleaning time.

Pros:

One study shows that the boiler can significantly drop the energy bill.
Lots of homeowners claim that it heated water during winter.

Cons:

The purchasing cost will be high.
One review mentioned that many homeowners face difficulties turning on/off the boiler system.

4. Bosch Greenstar Boiler ( Consumer Rating 4.5)

The Bosch Greenstar boiler can significantly reduce nitrous oxide emissions and achieves up to 95% efficiency. You can install this boiler as a wall-mounted or floor-standing unit.

Pros:

It comes with 96.1% AFUE and can come as either a combi unit or space heating boiler.
Many homeowners reported that this boiler makes your place warm fastly.
It provides higher efficiency as compared to other heating systems.

Cons:

The only disadvantage of this boiler system is that you need to replace the motor fan every ten years.

Conclusion

These are the top four boiler systems that you can purchase in 2021. However, being an electronic device, issues are quite common with your boiler system. Fortunately, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, you can contact JetAirCo Boiler Installer Maintenance Repair service at any time and seek our assistance.

Which bill do you pay the most for? Without a doubt, you addressed “heating,” correct? Fortunately, you are not alone. Heating costs make up over a portion of New York’s family energy bills1. Obviously, there are a couple of various fills to browse with regards to remaining comfortable over winter.

However, if you stay in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, we suggest you give JetAirCo Heating Service a call. Besides, in this passage, we will compare the cost of different heating systems. These heating systems include electricity, gas, and oil. Also, we will focus on the ways to make your system energy efficient and reduce energy bills.

An Overall Comparison Between Gas, Oil, and Electricity Heating System:

Let’s check out these three types of heating systems along with their advantages and disadvantages.

Pros of Gas Central Heating:

As per a 2020 survey, more than 23 million New York homeowners rely upon central heating to achieve the desired result. Now, check out why this heating system is so attractive.

You can efficiently operate it. It means you can turn on/off your gas heating system quickly.
Gas is the cheapest option and needs 4.17 p per kWh.
This heating system is super-reliable and needs no storage.
It can provide up to 90% of thermal efficiency.

Cons of Gas Central Heating:

Remember that gas is a fossil fuel; hence there’s a possibility for global warming and climate change.
There are possibilities of carbon monoxide leaks.
Upgrading your boiler system is quite expensive.

However, if an issue occurs while running your heating system, you can hire JetAirCo Furnaces and Boilers service and fix your problem instantly.

Pros of Electrical Central Heating:

More than five million New York homes use electric central heating systems. Let’s understand why.

Installing an electrical heating system is much less expensive than gas. However, underfloor heating can cost thousands of money.
A few maintenance and repair are required for an electric system- which means there’s no need for annual service maintenance.
Energy plans, such as Economy 7 & Economy 10 could reduce your electricity bills. However, it depends on how you install and maintain it. In order to achieve the best result, we recommend you hire JetAirCo Boiler Installer service.
Advanced storage boilers are super-energy efficient and work effectively with IoT tech innovations, such as smart thermostats.

Cons of Electric Central Heating:

If you haven’t used a night storage heater and heat it lately, you can’t correctly use your heating system.
At around 15.89 p per kWh, electric heating bills can be very high.
More than 50% of electricity is produced through gas-power stations, which means higher carbon emissions.

Pros of Oil Central Heating:

As per the National Grid study, an oil boiler will be a great alternative, as it can install quickly.
It can make your place eco-friendly when you need it.
When oil prices are low, you can store oil.
Oil boiler is an effective heating system as it’s pretty quick and easy to maintain and replace.

Cons of Oil Central Heating:

Your oil boiler heating system needs annual maintenance.
You always need to check the tank to see the oil level. Also, before it runs out, stock up.

Like said earlier, if an issue arises, you can try JetAirCo Oil Burner Service and solve your problems at the earliest time.

Wrapping Up:

So, we hope you got the given information from this blog:

If you are utilizing a supplier, electric heating will be the best option for you.
Gas is the cheapest choice.

Hence, we want to remind you that every heating system comes with unique pros and cons, and choosing the best one will depend entirely on your choice. However, suppose you stay near Hauppauge, Smithtown, Northport, and Long Island, New York. In that case, we suggest you contact JetAirCo Heating Installation Maintenance Repair Service and pick up the suitable one for you.

Despite the way that we’re simply a month into the fall season, an ever-increasing number of mortgage holders are starting to set up their homes for winter to guarantee that they stay warm and agreeable all through the season. Regularly, they do this by supplanting their material frameworks or even their windows. Undoubtedly, these are good choices. However, do you know furnace maintenance tips can also keep your place comfortable?

Remember that experts suggest that you don’t just turn on your furnace in the winter months. This is because your heating system remains idle for a couple of months. Hence, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Services and after that activate your furnace system.

Things You Should Perform Before Turning on Your Furnace System:

In the undermentioned section, JetAirCo listed six crucial aspects you must consider before turning on your furnace during the winter months.

1. Check the Filters:

Before you activate your heating system, you must thoroughly check out the air filter. Keep in mind; you haven’t used your furnace for months. Hence, there’s a considerable possibility that dirt and lose particles might gather within your furnace. If you notice a dirty air filter, give JetAirCo Furnaces and Boilers Service a call and replace the clogged air filter before you use the furnace. A dirty air filter can reduce the indoor air quality as well as negatively affect your family member’s health, especially if you have children and senior citizens at home.

2. Be Sure that the Thermostat Works Correctly:

As per a 2018 survey, the thermostat can affect the furnace’s efficiency. Less efficiency means you might end up with higher energy bills. So, hire JetAirCo Gas Furnace Repair Services, and ensure that the thermostat works smoothly before using your furnace heating system.

3. Search for Drafty Place:

Apart from checking the thermostat settings and air filter, you should search for drafty areas in your house. While doing this, you need to check your windows and doors. Keep in mind; if your windows and doors get damaged, air might escape from these places. As a result, your furnace will take longer to make your place warm. Therefore, if you notice a draft in your house due to damaged doors and windows, instantly call JetAirCo Heating Systems Services and repair or replace them to prevent air from escaping.

4. Test Carbon Monoxide Detectors:

As per JetAirCo professional, it’s not just the thermostat you inspect before turning on your furnace; you should also see the carbon monoxide detectors to ensure that it still works properly. It’s an essential step as a damaged furnace can create toxic carbon monoxide gas into your house. Therefore, check your carbon monoxide detector thoroughly before turning on the furnace system in winter. However, if you don’t have sufficient time, hire JetAirCo Furnace Repair Services and resolve all your queries at the earliest time.

5. Remove Particles Placed Near the Furnace:

Before you activate your furnace for the winter months, ensure to take out items that are placed near your heating system. These particles often include furniture, old clothing, or any other loose particles. Hence, inspect every area surrounding your furnace and keep them away to a safe place. Besides, ensure that items don’t block the air vents and air ductwork as these might prevent air from circulating in your house.

6. Note Issues Experienced by your Furnace:

While inspecting your furnace heating system, it’s highly recommended to do an overall checking of the furnace unit. Also, when you perform this, take note of the common issues that your furnace system might experience. For example, you might hear unwanted sounds from your heating system, the furnace suddenly stops responding, and many others. If these problems arise, instantly call JetAirCo Heating Systems Maintenance Services to ensure your furnace’s peak performance.

Conclusion

So, if you search for someone who can assist you in maintaining and repairing your furnace at a pocket-friendly price, give JetAirCo Furnace Repair Services a chance to become your service partner. Our humble request is to contact us if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York.

During the winter season, a gas furnace heating system warms your home like this: First, utilized natural gas or propane in the burner. The flames heat a metal warmth exchanger and exhaust out of the vent. The heater’s blower powers the warmed air into the ventilation work and conveys it through the home.

However, issues with a gas furnace are very common, and if you are a homeowner, you might know that you might have to repair or replace your home appliances after a specific time. A gas furnace system is also included in that list. Fortunately, if you live in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, JetAirCo Gas Furnace Repair Services will be there for your help.

Advantages of Gas Furnace Maintenance

In a recent survey, the U.S. Environmental Protection Agency mentions that if you well-maintain your gas furnace system, it can save up to 30% of energy bills. However, certain things only need expert assistance; in such a circumstance, you can end your search with JetAirCo Furnace Repair Services.

Let’s come back to the topic and focus on the benefits you will get if you well-maintain your gas furnace heating system.

1. Cut Down the Utility Bills

If you well-maintain your gas furnace, your system will run to its highest efficiency during the cold months. When you perform the maintenance task with JetAirCo, our technicians will lubricate the moving parts, tighten the electrical connections, and measure the airflow correctly. Besides, if you inspect your gas furnace system daily, you will check & adjust the blower components and gas pressure. In addition, furnace tune-up will ensure that every element of your system will work at its highest capacity, raising its efficiency during the operation. As a result, you might end up with lower utility bills.

2. Fewer Repairs

A frequent check-up allows the technician to thoroughly check & identify minor issues before turning them into major problems. If you hire JetAirCo Gas Furnace Repair Services, our lubrication, assessment, and cleaning procedure will ensure that your system will experience fewer repairing or breakdown problems. You will also get your desire temperature during the cold months.

3. Increase your Furnace LifeCycle

During seasonal maintenance, a wide range of testing & inspection involves. It ensures that the professionals will detect and fix minor problems that add years to the lifecycle of your gas furnace system. Regularly clean the condenser unit, testing the furnace unit’s starting capabilities will keep your system away from wear & tear. It will help you to use the heating system for the longest time.

4. Improved Capacity

Another important thing for which you should regularly perform a check-up. Bear in mind when you inspect and fixed minor issues of all the crucial parts, you will improve the overall capacity of your heating system. It means your heating system will take less time to distribute hot air throughout your residence.

5. Increase Safety

We believe you never want to compromise with the safety of your heating system. Do you know with regular furnace maintenance, you can provide an extra layer of security to your home? Yes, it’s true. Gas furnace heating system comes with a review of safety features & possible problem areas. Like, you need to clean and adjust the burner parts daily. Else, accidents can occur at any time. Fortunately, with JetAirCo Furnace Repair Services, you can avoid this hassle.

Only at JetAirCo

When you seek assistance from JetAirCo Gas Furnace Repair Services, you will always get something more. At JetAirCo, we can offer you everything that you need to run your gas furnace system. From furnace tune-up to installation, contact JetAirCo Furnaces and Boilers service today if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York.

Whether you use a boiler or furnace heating system, you will experience several issues with your system after a certain period. When this happens, the first thing that might come to your mind is to call an oil Furnace & Boiler Repair service provider like JetAirCo. As one of the leading Furnaces and Boilers system providers in the regions of Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA, JetAirCo’s professionals are always available to handle Oil Burner Service quickly, Boiler repair service, Furnace Repair Services, and Boiler Installation issues. Therefore, you can rely upon us at any time of the day.

But do you know? There are specific tasks that you can perform on your own. Here, for your help, JetAirCo’s professionals come with some pocket-friendly steps that you can attempt to prevent the costly repair cost.

Step 1:- Completely Shut Down your System

Before you move further, first ensure that your heating system is turned off completely. Hence, switch off the fuel/boiler electrical power and fuel supply. This way, you can protect yourself and perform any heating system maintenance and repair.

As per JetAirCo Gas Furnace Repair Services, you will see the electrical power switch at the top of the cellar stairs or the bottom. Locating it will be easy as the electrical power switch comes with bright red color light.

Step 2:- Take Out Loosen Particles & Carbon Soot

After successfully turning off the heating system, you should take out loose particles and debris from the heating system’s combustion chamber. Remember that the procedure might take some time; however, you need to repeat the step until you completely remove carbon dioxide, water vapor, carbon soot, and other debris from the combustion chamber.

Cleaning the heating system combustion chamber will stop debris build-up on the chamber wall or any other area.

Step 3:- Inspect the Flue Pipe

To make sure your heating system’s combustion products exit from your place correctly, give special attention to the flue pipes. Besides, with It, you will quickly determine any leaks, holes, or cracks.

Hence, thoroughly inspect the flue pipe. Precisely where the lines meet the heating system. In case you experience a small leak or hole, you can wrap it with foil tape for a temporary solution. However, large leaks or holes require professional experts such as JetAirCo Heating System Repair Services.

Step 4:- Change the Oil Filter

Have you remembered when you last replace the oil filter of your heating system? No? Then instantly purchase a new oil filter and replace it with the existing one. Remember that replacing the oil filter ensures that your system will operate at its peak efficiency and prevent short pollutants from clogging the oil-burner nozzle.

Step 5:- Change the Air Filter

Once you have successfully replaced the oil filter, it’s time to consider the air filter. However, before you change the air filter, be sure you brought the perfect air filter for your heating system. Keep in mind; every air filter is unique; hence it’s crucial to choose the right one that will adequately fit your heating system. We advise you to change the air filter; it’s always better to hire a professional expert and let them perform the task on your behalf.

Step 6:- Test the Burner Efficiency

By testing the burner efficiency, you will understand the boiler’s soot level and boiler’s draft pressure.

In order to measure the boiler efficiency, simply put a probe within the exhaust flue to extract the gas sample. Then, with a thermocouple, you can easily calculate the boiler efficiency.

Conclusion

We have full faith that you can perform the Heating Installation & Repair on your own. However, where is the harm to hire the Best Heating Repair Services for your purpose? Besides, the heating system operates at a high temperature. Hence, if, without taking necessary precautions, you want to do this on your own, you might put yourself at big risk. Henceforth, opt for the assistance of JetAirCo Furnace & Boiler Installation, Maintenance, and Repair service center. Grab our help if you stay near Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA.

A furnace is the most vital element of the HVAC system. When you set the thermostat, the furnace will activate to produce heat air. A blowing fan then distributes the warm air throughout your house. However, heat transfer totally depends on the furnace type.

Now, there are several types of furnaces available on the market and how you can pick up the one that will fulfill your requirements.?

Here, the professional of jetAirCo’s Furnace Repair Services comes to your rescue. In this short passage, we will explain some of the best-recommended furnace types and their functions.

Types of Furnaces:

Bear in mind, furnaces come in different sizes, and users mainly pick up a furnace accoding to their home size. Keep an eye on the remaining guide as here we have explained some top-notches furnace types and the way they work.

1. Single Stage Furnace:

This furnace type consists of a solo gas valve that allows gas to progress at the highest rate. Besides, if you use a single-stage furnace, you will get total control over the gas flow. This type of furnace is particularly designed to maintain fluency; however, you might often hear unwanted sounds from the single-stage furnace.

This single-stage furnace work at 80 percent of fuel efficiency will perfectly fit small and mild areas. Keep in mind; less technology involves installing this type of furnace, and you don’t need to spend much money to complete the setup process. Also, as minimal furnace repair require, you can use this type of furnace for the longest time.

2. Modulating Furnace:

A modulating furnace is a kind of furnace that permits the user to change how much warmth is delivered at some random time. This implies it generally works at ideal warming. Despite the fact that models change, most are intended to run utilizing 1% increments or diminishes to permit the heater to screen how much warmth is required. A modulating furnace guardedly adjusts the yield by holding the temperature of your house.

A modulating furnace is efficient and gives steady temperatures throughout your home. Do you stay in a place where winters tend to last for a long period of time? Then a modulating furnace will be the best choice for you.

3. Electric Furnace:

Don’t want to use a gas furnace? Then buy an electric furnace. To use a gas furnace, you have to install gas pipelines first. However, some homeowners don’t prefer to set up gas pipes and opt for electric furnaces.

Besides, if you have a tight budget, then utilizing an electric furnace will be ideal. Also, you don’t have to think about toxic fumes and carbon monoxide with an electric furnace, and can install it on your own.

4. Two-Stage Furnaces:

The two-stage furnace gives you more control over the gas flow compared to the single-stage furnace. In order to adjust the heating load power demand, the two-stage furnace can communicate with the thermostat.

During the cold seasons, the furnace’s thermostat will automatically open the gas valves and help the furnace use its full power. A two-stage furnace also comes with an extended heating cycle, which means absorbing the hot air and replacing it with cold air, making your residence comfortable for summer.

5. Natural Gas Furnace:

This is another prominent furnace you can opt for. One of the unique benefits of utilizing natural gas furnaces is that they don’t breakdown easily and save thousands of repair costs.

Natural furnaces utilize the most limited amount of fuels means using a natural gas furnace in your residence decreases the monthly bills. The natural furnace is the cleanest. Hence you don’t need to think about pollution.

6. Oil Furnace:

If you decide to use an oil furnace, at first, make sure that you have enough space to store oil. Besides, make contact with a company who will regularly deliver you oil.

This type of furnace releases lots of heat; however, you can easily distribute them into your house. Unfortunately, the dust and soot buildup makes these furnaces high expensive to operate. Besides, if you haven’t changed the air filter regularly as well as cleaned the chimney regularly, you might put yourself and your family members at the risk of fire.

For Further Assistance, Contact JetAirCo…

hese are some of the on-demand furnaces that you can install in your home. To complete the installation task, it’s highly recommended to hire professional experts such as JetAirCo. At JetAirCo, we are assembled with a team of experienced technicians who have the ability to install your furnace with no downtime. Therefore, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, just make us a call, and JetAirCo’s Furnace Installation and Repair Services will be present at your service.

Your heating system is one of the most crucial components for adjusting a comfortable temperature inside your home. When you have an effective heating system, your life will be much easier and bring comfort to your home infrastructure.

Sitting inside of a hot home in the middle of the summer can be more than unbearable. Besides, it’s also bad for your health. As per the World Health Organization, the temperature inside your house shouldn’t increase above 78 degrees if you wish to avoid the possible health risks that can come along with the summer’s appearance.

Hence, if your house seems too hot this summer, it indicates that you need to have heating system repair done instantly and maintain a comfortable temperature within your house.

Signs your Place Might Require Heating System Repair:

Identifying, whether your heating system needs repairs or not, isn’t rocket science. However, it will be challenging for the normal homeowner to identify a flaw in the heating system. Remember that most of these signs are hidden and can be easily overlooked. These are the top 5 signs that indicate your heating system needs repairs instantly.

1. High Utility Bills:

When your utility bills increase beyond your imagination, then possibly your heating system is the culprit. Besides, if your gas bills increase suddenly, it could be because of your heating system.

With time, your heating system becomes less efficient and reduces efficiency. This means your system might take longer to provide your house the right temperature. Hence, check the last 3-4 months bills, and if you found that bills increase drastically, then it’s the perfect time to call a professional technician to repair your system.

2. Burner Flame Turns Yellow:

We hope you notice that your heating system comes with a blue gas burner flame. If the burner flame suddenly turns yellow, it indicates that something happens wrong with your heating system. A yellow flame indicates the carbon monoxide present in your house. Carbon monoxide gas is very dangerous-especially for your children and pets. Therefore, when you see the furnace flame turning yellow, stop using your system and instantly contact a heating system service provider.

3. Hear Unwanted Noise from your System:

Do you ever hear unwanted noise from your heating system whenever you want to start it? If yes, that’s not a good sign. It indicates there’s something wrong inside your system that’s causing this noise, and you have to call a technician to come and stop this unwanted sound.

4. Thermostat Fluctuate Constantly:

If you have to adjust the thermostat too many times, it means something happens wrong. Also sometimes you might face difficulties adjusting some rooms temperature. Unfortunately, if you cannot adjust the thermostat after several attempts, leave the thermostat and pay attention to your heating system. There’s a possibility that the system might not equally distribute temperature to every room and due to this some room feels hot and others a bit cold.

You should quickly address the problem in order to prevent things from getting worse.

5. Age of your System:

Like other appliances, a heating system also offers its service for a certain period of time. Generally, you can use your heating system for 7 to 8 years. However, if you maintain it well, the longevity can be up to 10 years. Not more than that.

Also, a pilot light is an amazing way to notify whether your heating system is old. If your system contains a pilot light, it means you use an old heating system. If this is the circumstance, then replacing your heating system with a new one will always be fruitful for you.

Grab the Best heating System Repair Service with JetAirCo…

We hope till now you have understood the possible signs of heating system replacement. Looking for the best heating system repair service in Hauppauge, Smithtown, Northport, and Long Island, New York? Your search can be ended with JetAirCo. By providing quality services to our customers, we acquire a strong reputation in the same field. Rely upon us and enjoy this summer with an effective heating system.

The solar heating system has come up with many benefits for saving your energy consumption cost, which is the prime thing for having a heating system. But, you cannot install a solar heating system as easily as you can install other types of systems. You need permission from your local authorities and neighbors. You are even asked to follow the building code for the installation. JetAirCo has been one of the old heating system repair service providers in New York. Although we have handled different heating systems, we are popular for furnace and boiler installation, heat pump services, and more. If you are not satisfied with your HVAC systems, you will get us by your side. Contact us to know more.

Here, we have discussed the things you need to complete beforehand for installing your solar heating system.

Due to the complex process, some households change their thoughts and opt for the regular ones for their comfort and luxury. Remember that a solar heating system is not only good for your saving but also the best option for nature and the environment. It uses renewable energy to heat your house.

You need to investigate your local building codes, zoning ordinances, and other special regulations attached to it. Obtain a building permit if you want to install the heating system on an existing building.

Many a time, community and municipality area impose some rules for installing the system. You may go through the tough process of obtaining permission. The installation is mainly a local issue, and you need to find a legal way to get this job done.

We are experienced in the field, and we want to make you aware of all the problems that you may experience with your solar heating system installation. Building codes are the most crucial thing in this case, and the common problems associated with it are:

Exceeding roof load
Wrong wiring
Unacceptable heat exchangers
Tampering with potable water supplies

You can consider special area regulations, including the local community, subdivisions, and homeowner’s association agreement. The best thing that you can do to avoid any legal issues is to contact your local jurisdiction’s zoning and building enforcement divisions and homeowner’s association.

You can contact us for your heating system installation process. We offer a wide range of services for your home heating systems. We offer gas furnace repair service, oil burner repair service, and other services for maintaining your systems.

You can contact us for more details. We have a main branch in Long Island, New York. But, we serve in other areas also, including Smithtown, Northport, and more.

Knowing your furnace always helps you take care of your system in a better way. Not all furnaces work the same. This is why you need to check the AFUE (Annual Fuel Utilization Efficiency) of your system. The higher the efficiency, the better your system works. If you need any help for maintaining your heating system, JetAirCo offers you the most satisfying service that quickly solves your heating system problems. We have an experienced team for your system maintenance. Since we have been in the fields for many years, we have earned the knowledge of handling different technologies. You will get the best heating system maintenance service in Smithtown, Long Island, Northport, and other areas.

Nearly every furnace has similar features, and the numbers go high or down as per the price. If you use a gas furnace, we have mentioned your furnace’s key factors and how they work. This detail will help you know more about your furnace.

Variable speed blowers:

Variable speed defines the furnace’s fan motor, which has a different speed to control the furnace’s heat.

Blower motor:

The blower motor helps the warm air passes through the ducts. It takes care of the cycling air process.

Air filtration:

With air filtration, you can improve the air quality coming from your furnace. An electrostatic filter is attached to your system to trap particles.

Heat exchanger:

In a heat exchanger, the air gets heated.

Venting:

Venting is a significant part of your furnace. It has pipes from the furnace to the outside, allowing the gases to go out of your house.

Zoned heating:

This heating system creates different zones or areas in your house for the heating. You can control these zones separately by using a thermostat. If you have a large home, the zone heating proves to very effective for you.

Your HVAC system enhances your comfort inside your house. So, they have a role to play in your happy life. If you experience any problem with your system, call JetAirCo. Issues in your HVAC systems can put your life in danger.

JetAirCo offers heating maintenance service in Smithtown, Northport, and in other areas of New York. Consult with our experienced professionals about your heating and cooling system.

Sometimes, your system just wants a replacement. You cannot detect the need because you are not aware of the problems your system may go through. An aging system is better to be replaced than repaired. There are some signs that your system gives before its complete breakdown. If your system needs frequent repairs, you can search for new systems.

If the energy bills are increasing every month, it denotes a problem with your heating system. You can have us checked the system to find out problems. Call JetAirCo for more details. We are always ready to serve your demands.

If your furnace starts blowing cold air, this is genuinely the situation that makes you worried. The comfort of heating in the freezing weather gets disturbed completely, and you need the right solutions immediately to restore your peace and comfort. JetAirCo has always been there with you for serving you the proper heating solutions. We have experienced professionals who visit your place and check your furnace to fix the issue. We offer heating services in Hauppauge, Smithtown, Northport, and other areas of New York. If you have any problems with your HVAC systems, you will always have us beside you.

If your furnace is blowing cold air, there are a few things that could cause this problem. Here, we have mentioned all possible reasons for your furnace blowing cold air instead of the warm, comfortable breeze.

Incorrect thermostat setting:

Sometimes, people set their thermostats wrongly, which causes this problem. Keep your thermostat always in the AUTO setting. Your furnace will run correctly. Check the battery of your thermostat also. If the battery is dead, your furnace will stop working.

Sometimes, you bought the wrong thermostat for your system. This incompatible issue causes heating problems. Check your thermostat or hire a professional who will check your thermostat and the compatible issue.

Dirty air filter:

Your air filter gets blocked due to the lack of maintenance. It disturbs the airflow, and you do not get satisfied with heating for your comfort. It also increases the chances of overheating in the system. The safety switch will shut off the burners to prevent any dangerous situation.

If you are using a disposable filter, you can change it. If it the permanent, then you can clean your air filter. But, hiring a heating professional is the safest option to fix the issue. It involves checking technical parts, which you cannot do.

Clogged condensate line:

High-efficiency furnaces generate condensed liquid, which the system drains away. But, if the condensate drains line gets clogged, the furnace will start blowing cold air. JetAirCo has always been ready to meet your requirements. Visit our branch in Long Island, New York. We are actively serving in areas like Hauppauge, Smithtown, Northport, and other areas.

No Pilot light:

You will not get a pilot light if it is blown out or not lighting correctly. Due to blockage, the pilot light may not be lighting correctly. You can relight the pilot light carefully. If it is not lightened or goes out again in a minute, call an HVAC service provider. Your system needs an expert solution.

Leaky ducts:

If you have an old system, leaky ducts are a very common problem. Leaky ducts cause heat loss, increasing energy consumption. JetAirCo can protect you from the growing energy bills. Our solution is effective and affordable also.

Insufficient gas supply:

If your gas supply gets disturbed, you will not get heating from your furnace. Check your gas supply and check the valve also.

In the winter, do not spend a day without your furnace. We give you the right solution for you. Call JetAirCo, and you will get immediate service for your heating system. We offer heating services in Hauppauge, Smithtown, Northport, and other areas of New York.

You need a proper function from your furnace in the winter when the outside temperature is freezing. But, if you think your furnace is always ready to meet the peak demands, you are wrong. If it is not maintained, your furnace works hard to raise the temperature, increasing your energy consumption bills. JetAirCo shares tips with you to make your furnace ready for the winter. We offer heating system services in Smithtown, North Port, Hauppauge, Long Island, and in other areas of New York.

Your furnace will work without any faults when you pay attention to the maintenance. While an annual servicing of your furnace improves the system’s performance, you can check a few things on your own to make the system work finely.

Turn on your thermostat:

Set your thermostat in the heating mode and raise the temperature higher than your room temperature. If your system does not turn on, check your thermostat’s inside by opening up the cover. If everything is perfect there, check the power source of your heating system. If you still do not find anything wrong there, call a professional. Do not check the technical things of your furnace as it can be dangerous. We offer Heating Systems Services in Smithtown and other areas of New York. Give us a call to know more about our services.

Clean your air filters:

Air filters are an important part of your furnace. Since it filters the air, it can be clogged by dust and dirt. Cleaning your filter improves the functions of your furnace. Replace your furnace every few months. If you use a permanent electrostatic filter, you clean the filter and use it.

Cover the AC Condenser:

If your heating system is not a heat pump, cover up your AC condenser to avoid icicle build up in the system. Do not use a moisture-trapping plastic trap to wrap it up.

Clean the system’s heat exchanger:

You cannot perform this task because it needs technical knowledge. Hire an HVAC service provider near you to clean your heat exchanger. JetAirCo is a renowned name for maintaining HVAC systems in New York. We have a team of experienced professionals who visit your place and check your systems. They will quickly fix the issues to restore your comfort inside your house. Don’t spend a day without your furnace in the winter. Call us soon.

Lubricate and clean the blower motor:

Read your manufacturer’s manual, and if it permits you for the lubrication, you can do this. Turn off the power and clean and open the caps of bearings. Lubricate the bearings to get a smooth function.

Check your igniter switch:

If you have an old furnace, you may need to relight the pilot. The modern systems have electronic ignitors. If the ignitor is not working, press the reset button of your system. If it is still not working, call JetAirCo. We will reach your place and will offer you the best service.

Check your carbon monoxide detectors:

Your furnace produces carbon monoxide gas that throws away from your house through the ventilation. A carbon monoxide detector detects the presence of the gas and alerts you. This is a dangerous gas for your health. So, make sure that your carbon monoxide detector always performs perfectly. If you want to know more about our services, give us a call. We are a popular HVAC service provider in New York. Connect with us for more details.

You are inside your house in a cozy environment, but that does not mean you are safe from contaminants. Many factors pollute your home environment, and your furnace is one of the prime factors that can make the inside air poor. We recommend you hire an experienced Heating System Maintenance service provider and check your living environment. JetAirCo brings you some common situations where your furnace contaminates the air.

When you do not maintain your furnace properly, it causes so many issues connected to your health and wellness. In the winter, you may keep your home sealed perfectly for not allowing the outside air to let in. if you have a faulty furnace, this turns the situation worse for you. In a closed environment, the pollutants in the air cannot flow outside.

Hire an expert and maintain your furnace properly. JetAirCo is offering Heating Repairs in Hauppauge, Smithtown, North Port, and other areas of New York. Contact us and get the best service. The company has a trusted customer network, and our loyal clients spread our names. We are happy to serve people. If you have any problem with your heating system, you can contact us. Our experts will reach your place immediately and try to solve your problems without taking much time.

If you want your furnace to work perfectly, taking care of your furnace’s ventilation is a must thing for you. A well-ventilated furnace will always meet your requirement by offering the right temperature for your environment.

Your furnace produces carbon, which goes outside through the un-clogged ventilation. If it gets blocked, the amount of carbon monoxide in the air will also increase, making your environment dangerous to your health.

We recommend a carbon monoxide monitor that detects the presence of carbon in the air. It alerts you. Pay attention to the maintenance of your furnace. You can do some easy checks without in-depth technical knowledge. But, your furnace needs proper maintenance at least twice a year. JetAirCo can help you get the right maintenance service within your budget. We are offering Heating Maintenance in Northport, Hauppauge, Smithtown, and other areas of New York.

We request you to check a few things before our expert team visits your place. Sometimes, there are minor issues like dead thermostat batteries or wrong heating mode, which you can handle perfectly.

Here, we mention a few things that you can check before we arrive at your place.

Make sure that thermostat is in the heating position.
Check the programming setting of your thermostat.
Replace the batteries of your thermostat.
Check there is a proper electricity flow to your thermostat.
Check the furnace switch.
Examine your furnace’s vents

If you find that the issue is somewhere else, call JetAirCo. We will reach your place and offer the best services for your heating system. A faulty heating system is dangerous to your health. Leave the technical parts to us. We offer heating services in Hauppauge, Smithtown, Northport, and other parts of New York. Call us and fix the appointment.

Changing air filters does not cost you high, but ignoring this can lead you to big and expensive furnace repair in the future. So, routinely check your air filter and do the necessary steps to keep it clean. When it gets clogged, you can opt for replacing the filter with the new one. An air filter is an important part of your furnace. It has a direct connection with the quality of the air inside your house. So, to keep your health happy, check the air filter of your furnace. You can call a professional to get the best advice on it. JetAirCo is a trusted name when it comes to HVAC system maintenance. It has a team of professionals who visit your place and solve all problems with your system. Visit Long Island, New York, to communicate with us.

We are active in areas like Hauppauge, Smithtown, North Port, and other New York places. When your air filter is working properly, your system remains perfect without any chance of dirt build-up inside the system. Our experts recommend changing the filter once in three months. Here are some of the facts that you might ignore when considering the value of your air filter.

The heating and cooling efficiency:

The performance of your heating system will go high when you have a cleaned air filter. For the efficiency of your furnace, concentrate on the filter quality. When the particles start building up in your furnace, it needs a costly repair.

If you need any consultation for your HVAC system, JetAirCo is always ready to offer a quick solution. Do not compromise with your comfort since we are always available for your service.

Avoid unnecessary repair cost:

a clean air filter also saves your money. A dirty filter disturbs a proper airflow in the system, causing overheating and sudden shutdown like issues. You can avoid expensive repairs with a clean air filter.

Improve air quality:

The quality of the air will enhance when you invest time and money in the air filter. The filter keeps the dust and dirt away from you, offering a healthier environment to live in.

The benefits of changing air filters are many when you think about your health. If you are confused about which filter to buy, JetAirCo extends its helping hands to you. The customer support team is always available for your queries. You can also directly contact us by visiting our branch. We are located in Long Island, New York. For any HVAC system related problems, we will be happy to help you.

If you are worried about your furnace fan that is constantly running, there is nothing to be worried. Heating professionals believe that a continuous running of the furnace fan will benefit your heating. If you experience any odd things with your furnace, you can contact JetAirCo. The company is offering Heating Installation & Repair in Long Island, Northport, Smithtown, and in other places. Those who are using the furnace for heating, have the same questions to ask. Our heating experts will clear your doubts by sharing their experience.

When you keep the fan running always, you will get the better circulation of the heated air. Since the heat rises high, the upper portion seems hot and the lower area of your house remains comparably colder. To solve the issue, you must keep your furnace fan running always. It also helps the air circulate in every corner of the house.

It also benefits those who have problems with asthma, allergies, and respiratory problems. You can install an air filter to keep the quality of the air high. When you continually run the fan, it also improves the quality of the air.

JetAirCo is a trusted name for your HVAC system service. If you want heating repairs in Northport and other places, you can visit us to know more about our services. For immediate help, hire us and we take minimum time to reach your place.

When we are talking about the benefits of continuously running furnace fan, we must talk about some drawback also. It increases your electricity bill a bit. But, if you have a high efficient motor attached to it, you will experience no difference.

Many people even think that this continuous running of the furnace fan can cause a breakdown. But, you should know that manufacturers designed the fan for performing the function. It can bear the load and it does not cause any problems also.

Along with this, you have to keep in mind a few factors regarding your furnace fan. If your ductwork is located in the attic, you must not keep the fan running always. If you have leaky ductwork, you must keep your fan off when it is not needed.

The fan is continuously running because of the system of your thermostat. In most thermostat, there are two modes – auto and on. When you choose the auto mode, it turns on the fan as per the requirement. When it is on, the fan will always be running. It can also be caused by a faulty fan limit switch. If you experience a technical problem with your HVAC systems, you must call a professional for solving the issue.

JetAirCo is always there for you. It is offering Heating Installation & Repair in Long Island, Northport, Smithtown, and other parts in New York.

If you are using a gas furnace, you may be told to take extra precautions since gas furnaces create more unsafe situations compared to the other types. Sometimes, the concerns are exaggerated. Using gas for domestic and industrial purpose is very common. If your house has a natural gas line, you can do many things with it. You can also heat your furnace. If you are worried about the safety issue for your furnace, you must consult with a professional heating service. JetAirCo is a professional name that helps you repair your heating systems properly. We are offering HVAC maintenance and repair service in Smithtown, Northport, and Long Island. If you have any query regarding your heating system, we can solve your every problem.

If you are thinking that gas furnace is unsafe to use. Time has come to check reality.

Here, we try to clear your doubts by presenting to you the facts of using a gas furnace.

Gas furnaces have safety measures:

These days, manufacturers introduce advanced safety measures to the gas furnaces to offer you a protected environment. You can get many built-in measures for your safety. So, thinking about the danger from your gas furnaces is wrong.

Carbon Monoxide Detector for Early Warnings:

Gas furnaces need a carbon monoxide detector to offer you a safe environment for your health. Carbon Monoxide (CO) is an odourless, colourless, and tasteless gas. This is why you need a detector that makes you alert about the amount of gas. These detectors are placed in different rooms and keep your living safe. These days, smoke alarm systems also come up with the CO detectors.

Routine maintenance:

Routine maintenance is required for your every HVAC appliance. Such maintenance should be carried out by experts because they are well-aware of the technical parts and they also take extra measures where the chances of faults are high. If you are using a gas furnace, a professional heating service provider pays attention to the heat exchanger and the gas lines. These are the most vulnerable areas when it comes to cracking and leakage. Hire JetAirCo for your heating system repair service. We are active in areas like Smithtown, Northport, and Long Island. Consult with our experts and come up with the right solutions for your HVAC systems.

Safety steps:

In the fall, your heater needs maintenance from the professionals. It improves the working condition of your heating system. In the winter, you also need to take extra maintenance steps for your heating system. Change the air filter in every 1 or 3 months. It prevents overheating. Clean the area around the cabinet and don’t keep any inflammable items around it.

JetAirCo is helping many houses for getting a comfortable temperature for your living. If you need any help for the maintenance of your HVAC system, we have a branch in Long Island, New York. Visit us for more details.

Furnaces are one of the most-used products in homes. It gives you warm during the winter and makes cozy weather for you. If your furnace does not produce the needed temperature, you must call a professional and get your system repaired by an expert. Don’t do it yourself unless you have professional training. JetAirCo is a very renowned company offering the HVAC maintenance service and repair in Smithtown, Northport, and long Island.

Here, we discuss some serious issues that need professional service.

Electrical issue:

An electrical issue is a major issue and it can put you and your family’s life in danger. You need to make sure that your home electrical system can carry the load of the systems you are using in your houses. If your light flickers when you turn on your system, it means that you need to recheck your electricity.

Your furnace is unusually loud:

If your furnace releases strange noises, you must call a professional and let him/her check the issues. Generally, furnaces cause a bit of sound while performing. It is because of the air blow in the system. Insulate the duct to cut down the noise of the system. If the noise doesn’t seem common to you, call JetAirCo or an HVAC service provider near you. JetAirCo is an experienced HVAC service provider in areas like Smithtown, Hauppauge, and Northport. Our professionals will visit your place and provide you with the right support.

If the furnace sound relates to pinging or popping, rattling, grinding, and more, you must hire a professional. It needs technical knowledge, and a professional service provider is the best person.

HVAC system turns on and off:

If your system frequently turns on and off, it can be a sign of a fault. There are many things associated with the problem. It can be your air filter or something else. Call JetAirCo and they will handle everything. They are offering HVAC maintenance and repair services in Smithtown.

If there is an odd smell:

When you get a strange smell, something like rotten eggs, you must leave your home immediately and take a safe place. You cannot smell natural gas, and this is why a substance adds to it to make us alert about the presence of the gas. If you smell smoothing like the rotten eggs, leave your home immediately. Don’t turn your lights on or off. Electricity can ignite the gas. Do not turn on the stove and try to keep the window open. Call a service to fix.

Your furnace is blowing cold air:

If you are getting cold air from your furnace, it must be a problem with your blower. It needs cleaning. Check the flashing light to identify the problem. If the blower light is green, it is okay. If it is red, you need to call a professional.

Your heating system gives you many hints before it completely stops. The above-mentioned details are the signs that help you know your system is running with the faults. You can call us immediately if you feel something is wrong with your system.

JetAirCo is a renowned company in New York and they are offering the right support for your heating system.

If you use a gas furnace for heating your house, you should stay alert because it can cause dangerous situations for you and your family. The first thing that you need to do is to find the best and professional gas furnace fitters for you. They are experienced enough to install your heating system in the right way. Don’t try to fix the installation work on your own. One mistake can put you and your family in danger. JetAirCo is an experienced name for your heating system. It offers services in Long Island, Hauppauge, Smithtown, Northport, and in more areas.

When it comes to the gas furnace, an experienced name will always provide you with the right support. Remember that when you try to fix the installation, you know nothing about the technicalities. The chances of a faulty heating system become higher. It can catch fire in your house or can produce pollutant like carbon monoxide that is known as the silent killer.

When you experience health issue while your heating system is on or your health issue gets worse, you must check your heating system to avoid any mishap. It can be the reason for the carbon monoxide released from your faulty heating system.

Carbon Monoxide is a dangerous gas that does not have any color and odor. When you have a high level of carbon monoxide in the environment, it is so dangerous that it can take your life too. Children, pregnant women, aged people, and everyone exposed to the gas show serious health issues. If you are in such an environment, it shows you some signs, including:

Tiredness
Shortness of breath
Dizziness
Headache
Weakness
Confusion
Chest pain

If you have any symptoms mentioned above, your heating system may release carbon monoxide. Consult a doctor and get to know that whether your symptoms have any connection to the carbon monoxide or not.

Gas heaters are essential as a home appliance. Always find an expert for installing your heating system. JetAirCo will help you install your system properly. We have an experienced team that reaches your house and analyzes your home environment. Then, we choose the right place for the installation.

To protect you from any danger from the gas furnace, we mention some common signs of faults.

You can find a yellow flame
The pilot light bangs or goes out completely
The discoloration of walls due to the heat damage
The adjacent walls become too hot to touch
Soot strains around the heater

All of these signs tell you that hire a professional heating service for your house. If you haven’t serviced your system for two years, you must immediately contact a heating system service provider near you. If you are in New York, we are with you. We are offering excellent heating system services in Long Island, Smithtown, Northport, and in many areas.

Oil fuel heaters heat your room and are very common in the heating system. But, you have to maintain safety to protect you and your family from any kind of mishap. Here are some safety guides for you if you are using an oil fuel heater. JetAirCo is always there with you if you need any information about your heating system. We also help you install your heating system at your house.

We have a branch in Long Island, New York. But, we are very much active in areas like Hauppauge, Smithtown, Northport, and in other areas. Our experienced professionals will offer you the right solution to any of your heating system. No matter you use a furnace, a boiler, or a heater, we provide you the right help. Contact us for your heating system solution.

Safety precaution is there for your heating system. Never use the extension wiring for your heating system. It has a tendency to overheat the system. It can catch the heat and put your life at risk. Always avoid the dangerous situation related to your system.

If you want to keep your heating system always in a safe condition, follow these rules mentioned below.

Use internal mechanism:

If you use any external tools for your heating system, you must consider the internal mechanism only. Anything that you add to your system from outside may not match the same efficiency as your system. So, any external things can harm your system.

Keep the radiator away from kids:

When you choose a radiator, you must pay attention to the stationary ones instead of the wheeled ones. Keep your kid and pets away from the radiator.

Overheat protection switches:

Some radiators have overheating protection switches that turn off the system when it is overheating. You can invest in these systems for your heating system.

Keep the heater away from the combustion materials:

You must keep your heating system away from combustion materials like furniture. This safety maintenance is required in this scenario.

Keep your heating system at the right place:

Don’t place your heating system in a damp place with poor ventilation. If you need any suggestions for your heating system, you can contact JetAirCo and get the best offers for your heating system.

We are offering professional help to house owners to solve the heating or cooling system. Our service area includes Hauppauge, Smithtown, North Port, and more. Call us for more details.

If you are using a heating system, you can take care of so many things to keep the warm inside and to use the heating system properly to the maximum. Here, we discuss some easy tips that help you manage the heating system very well and you can also reduce the cost of the system. If you need any help to maintain your heating system, you can call JetAirCo. The company is offering services in Hauppauge, Smithtown, North Port, and Long Island.

No matter what type of heating system you have, you will get the best solution from the expert. When you maintain your heating system, it will provide you a comfortable environment as per your requirement. JetAirCo is a known name in New York since they offer help and solutions for your heating system without wasting time.

Here are a few tips that you can follow for using your heating system for the best:

Understand your heating system and control it rightly:

You must learn how your heating system works and then pay attention to the process of how you control your system. This is one of the best ways for maintaining your system. If you know the proper way to control your system, it has a huge return in terms of saving your energy, lowering the operating costs, and more. So, learn to control your heating system properly.

Turn your thermostat down:

Even 1 degree down from the set temperature has many benefits, especially in saving your energy consumptions. Check your thermostat and set your temperature properly.

If you feel that your heating system does not offer you a comfortable environment, you can contact JetAirCo and opt for professional maintenance. They are knowledgeable about every part of your system. They will find out an exact cause of the faults and solve them accordingly. Contact jetAirCo and opt for the professional checkup of your system.

Don’t put your clothes to dry on the radiator:

This reduces the heating efficiency of your radiator. Your system does not understand the right temperature to offer and it consumes more fuel to generate heat. So, do not dry your clothes on radiators.

Let the sun rays in:

If it is a sunny day, you can use the natural heating source to keep your room warm. It saves your energy consumption a lot. It is good for your health also. So, open doors and windows to let the sun rays into your house.

Insulate your door furniture:

You must insulate your door furniture to keep warm into your house. Cover the letterbox and keyholes so that there will be no escape way for the warm air.

If you are looking for professionals for repairing your heating system, you can contact JetAirCo. The company can help you with the real solution. No matter what the problem is, an experienced heating service provider will visit your place and fix the problem without taking much time. They have a branch in Long Island, New York, but they are operating widely in areas like Hauppauge, Smithtown, Northport, and more.