Your furnace keeps your home warm and comfortable for you. In winter, the demand goes higher, and it works harder to meet your requirement. Your furnace may get broke down suddenly, or it may reduce its performance. You must not wait for anything and can call a professional to check your heating system. But, some minor cases can lower the performance of your system or can stop the system from heating your home. Here, we will discuss things that you must check for your furnace repair. For any furnace repair services, you can call JetAirCo, the company trusted by happy clients for their prompt services.

Check your thermostat:

Checking your thermostat has become an obvious thing. Many house owners called us for the furnace repair, and we later discovered that the issue was the thermostat setting. This is a minor thing that you can check on your own. Make sure that your thermostat is in heating mode before calling us.

Filter issue:

A filter plays a very important role in your heating system. It filters the air that goes into the system, and it also filters the air that goes out of the furnace. So, clogging or any obstruction in filters can reduce the efficiency of your furnace, and there will be a risk of overheating. Maintenance is the key to keeping your system in perfect condition. Choose the best Furnace Repair Services for your home to improve the performance of your furnace.

Check batteries:

Although some thermostats are connected to the home’s electrical system, some thermostats use batteries. You must know how your thermostat works. If it uses batteries, you must check them. Sometimes, changing the batteries only will solve your furnace issue. For anything else, you can consult with JetAirCo, a renowned company for offers the best heating and cooling services.

Check the power issue:

If your furnace runs on electricity, you must check your thermostat fan switch. It usually stays in the auto or on mode. The Auto means that the fan will turn on when the furnace is on. You can also turn the switch to ON by troubleshooting the problem. If your fan starts, you can ensure that the power is not the problem.

Call jetAirCo to get the best heating system service for your home. Our experts will repair your furnace, no matter which type you have.

Circuit breaker:

You can check your home’s circuit breaker and find out the circuit that controls your furnace. You may need an expert to handle this. If you are not a very technical person, consult with the best heating repair services to find the right solution.

Furnace switch:

Your furnace has a special switch which looks like other switches. Check whether the switch stays on or off. Since the switch comes unlabeled, you need to find out it. The best way to maintain your heating system is to call a professional. When your system gets maintained, it does not cause any issues also. Call JetAirCo to learn more about your furnace. We offer Furnace Repair Services to help your system.

When you are maintaining your gas furnace, you can use your system for a long time. It does not need replacement and repair, and you can save your money. If you think maintenance is tough for you, call HVAC experts. JetAirCo is a renowned name that takes care of your HVAC systems perfectly. You can consult with us and hire our experts to solve your heating system. If maintenance does not improve the condition of your gas furnace, you can choose gas furnace repair services. Please call us to know more.

Here are some tips that you can follow while maintaining your furnace:

Work under a safe condition:

Safety always comes first. Before you start cleaning your furnace, turn the power system off. You must also check the gas leak before your cleaning. The gas leak is a dangerous issue, and it can cause a severe, fatal accident. If you identify a gas leak, you must stay away from it and call an expert to fix the issue. Immediately vacant the place and wait until the problem gets fixed by a professional. You can call JetAirCo and let them check your heating system. They are experienced in the field and offers the right solution for your heating problem.

Clean and repair the filter:

It is a major part of a gas furnace as it blocks dirt outside of your system, keeping it clean. You must replace or clean your filter frequently to keep the system perfect. The filter can accumulate dirt and debris, which can reduce the functions of your gas furnace. You must replace a completely clogged filter. You must change the filter to keep your gas furnace always active.

Call JetAirCo if you need any help. We have the best experts who will visit your place and perform the replacement or maintenance works.

Check the thermostat:

Your thermostat may also have problems, especially when you use it for a long time. Your thermostat may also need replacement. Check your thermostat to ensure that it is working properly. Replace it if needed.

Clean the blower:

After cleaning the filter, you must check the blower next. The blower stays next to the filter in the heating system. It can also collect dirt that penetrates through the filter. You can clean the blower to remove the accumulated dirt. For accessing the blower assembly, you need to remove the panels first. You can use a damp cloth for cleaning the blower. For other details, please visit our official website. We have discussed so many things in our blog sections about your furnace.

Clean or repair furnace ducts:

Furnace ducks can easily be damaged, especially when you use a forced-air furnace. you need to clean the ducts with a high-power vacuum cleaner. You can call JetAirCo to get this job done. Cover all ducts to prevent the air leaking issue. If your furnace needs repair, you can opt for the Gas Furnace Repair Services at JetAirCo. Contact us to know more details.

A thorough inspection will always be helpful when it comes to the maintenance of your gas furnace. Hire an expert who knows everything about your furnace and offers the right solution. Call JetAirCo and know about your furnace more. Consult with us for more details. We also offer gas furnace repair services in New York.

If your furnace is not working, your winter is a nightmare. The cold breeze will spoil your luxury. The time has come to concentrate on the performance of your furnace. Winter is approaching you very fast, so uncover your furnace and hire the best furnace repair services for your system. It needs to be checked and analyzed. Call JetAirCo and get the best experts for your system. If you need a quick service, please visit us to know more.

It is important to know how your heating system works. Here, you will get complete information about the working of your furnace. You will learn a step-by-step process for maintaining your thermostat.

Check your thermostat first:

You must check your thermostat first. Although it seems silly, many homeowners make mistakes in thermostat settings. Many people make service calls without checking their thermostat.

Here are a few things you can check:

  1. Check your battery on the thermostat
  2. Open your thermostat and clean the dust and debris
  3. Make sure that the date and timing is correct
  4. Check the breaker

Reset home service breaker:

When your furnace is not producing heat, checking the circuit breaker is also an option. Make sure that thermostat is set to heat. Change the temperature to feel the noticeable difference. You must check the home breaker’s panel and find out the circuit that controls the furnace. You can test the breaker manually. If you think it is too technical, you can consult with the furnace repair services. JetAirCo will offer you the right solution for your furnace.

Change your clogged filter:

When you have poor furnace performance, you can check your thermostat also. Clean your air filter, which is an essential part of your home furnace maintenance. It is also the easiest maintenance tip for you.

Replace your furnace filter and enhance the longevity of the system. three steps that you can perform for keeping your filter clean are:

  1. Locate your filter
  2. Check your filter
  3. Replace your filter

Safety switch on your furnace:

These tips all do it yourself tips, but you can ask a professional if you are not aware of different technical parts of your system. JetAirCo offers furnace repair services in New York. You can consult us for maintaining your heating system.

If your furnace is stopped working, you must check the safety switch of your system. When the furnace door is removed, the safety switch is popped out. You can activate the switch by placing the door in the right place.

Keep the surrounding area of your furnace clean:

You need to ensure that the area of your furnace should be clean. There is no inflammable item around your furnace. A clean furnace always functions better. If you keep things around your furnace, it will increase the chances of fire damages.

There are many things that you can perform to maintain your furnace. It will be tough to cover everything in one blog. We will discuss the rest of the maintenance tips in another blog.

If you need any help, you must call us.  JetAirCo offers furnace repair services in Long Island, New York.

Your heating system provides you comfort in the winter season. But you have to ensure that you will get uninterrupted heating for your home in the chilling cold. Your heating keeps you warm in this condition. But when a complete breakdown happens, you will experience a tough situation. Heating emergencies should be avoided and you need to maintain some tips for your system. If you need any professional help, contact JetAirCo. You will get an experienced team by your side. We have a team of experienced professionals who can deal with different types of heating systems, no matter whether you have furnaces or electric heat pumps.

To avoid the chances of a sudden breakdown of your system, you can do a few things. We are mentioning everything for you.

Your system needs professional maintenance:

Your heating system needs a professional maintenance service. Call JetAirCo and our experienced professional will do the maintenance for your system. They check your internal systems and clean filters. They also ensure that there is no problem left that can stop your system’s future. Only an expert can help you get the best option for your heating system. We are very much active in areas like Hauppauge, Smithtown, Northport, and Long Island.

Don’t Try To Repair The System Yourself:

The heating system is made of complicated machines. Only an experienced professional can handle the situation. Even though you are knowledgeable about the machines, you should leave the repairing part on an expert. A professional person takes care of the matter in the best way. Call JetAirCo and book their service.

Replace your heating system:

If your system is more than 15 years old, you can think of replacing your heating system with others. If you have any queries regarding the system, we are always with you. Give us a call and an expert will be in your home.

Know the right size:

A heating system comes up with many varieties as per your requirement. Depending on your area of living, you must choose the system. Remember that heat pumps are good when you need moderate heating. So, if your climate is severely cold, you must invest in furnaces. They offer proper heating to keep your room warm. Besides, heat pumps can work for both heating and cooling functions. For the size, you must call a heating professional. JetAirCo has a branch in Long Island, New York.  If you are living in areas like Smithtown, Northport, Hauppauge, and other places, you can contact us.

For your heating system, you have multiple choices and you can install any of them for heating your room. Oil boilers are the common option for heating your space. It works much like the gas boilers and it is a comparably cheaper option than the electric heaters. If you want to know more about the heating systems, you can contact JetAirCo. We are one of the reputed names for offering HVAC services in Long Island, New York. We have a wide presence in Hauppauge, Smithtown, and North Port. If you are planning to buy oil boilers, you must contact a professional heating service provider.

The fuel, in this case, is oil and it is burnt in the combustion chamber and the heat exchanger heats the cold water. Oil is an efficient fuel and it uses the maximum heat and gas for the heating process. There is less wastage. It is a profitable solution and you will also get the best return from every unit of energy.

The difference between the gas boiler and an oil boiler is how the fuel is stored in the system. The gas boiler does not store gas because it is connected with the supply lines. You will never run out of fuels in this case. But, when you are using oil boilers, you need to store the fuel. Call JetAirCo and get the installation done. We have experienced professionals in the field and they will help you whenever you call us.

The oil tank of the oil boilers must be located on your property. You need to also maintain installation regulations. When you hire us, our experienced HVAC professionals are well aware of these regulations and they set up your tank in the right way.

Call JetAirCo for getting the HVAC service in Long Island, New York. We are providing heating and air conditioning solutions in Hauppauge and other parts of New York.

When you are installing the oil tank, the base of the tank must be strong enough to carry the weight of the tank. It must sit on the solid ground. If it is concrete or a slab, make sure the thickness of the object will be 42mm and it must be extended out 300mm beyond the perimeter of the tank. If the tank is close to your house, you must install a firewall between the tank and your house.

The tank should have an automatic shut off valve that stops the fire in the boiler from spreading in the tank. You need to refuel the tank as per your needs. Contact JetAirCo and get in touch with experienced professionals for your heating and cooling system service.