When the temperature starts dropping, one of the most important tasks comes from Heating Maintenance services. Therefore, here we will focus on the main points on that.

If you are living in an area where winter is approaching and the temperature is falling, then it is the right time to get support for the Heating Maintenance services at your house. Because this is the only way you can get the comfort of a warm home during winter.

For this purpose, you can get help from JetAirCo. They will provide services like Furnace Repair Services Northport and Gas Furnace Repair Services Northport. Contact to know more.

This time, one vital task for your house is to repair the fall furnace and check the system is working well or not. If you need any kinds of help from professionals, seek help as soon as possible in order to keep the furnace safe.

Although it is also important to have an annual check for the systems, especially when the furnace reaches the age of three years, there are certain things that you need to remember for the furnace. So, here we will get to know them better.

Checking the Thermostat:

As a house owner, you need to check some certain things about the thermostat. At first, make sure that the thermostat is set to the mode of heat or not. Then, go for checking that the temperature is set to the desired level or you need some changes there.

After that, go for setting the temperature at the right level and check for its activation. Finally, check once that it is working properly inside the furnace. For this, you can set the switch to below heat the raising to a higher level.

If you witness any kind of issues in your furnace, call JetAirCo. They will help you to make it well function even if you need any assistance for the Oil Burner Service Northport.

Checking for the power:

The main working of the furnace depends on the electricity power. Whether it is a natural gas furnace or anything else, make sure that you check the power well beforehand you start the furnace.

At first, set the power switch to the On mode, and then check the circuit breaker. After that, keep watching that the furnace is working or not. If the switches run off immediately, check the circuit breaker again. You can take help from a service center too.

Checking for the Pilot Light:

The pilot light is a vital part of the system. Generally, as a house owner, you should place the light behind the door, mainly near the furnace base. The light helps to ignite the fire source.

So, if the light stops working properly, you can use another light source in order to kindle the light. A grill ignitor comes to your help. But if you fail to lit it properly, do seek help from a Heating Maintenance services company.

JetAirCo provides help in furnace repair, oil burner repair, and gas furnace repair services in USA. Contact them to know more about their service and keep the furnace of your house working well.

Summer finally wraps up its show, and now winter will play the lead role in the temperature zone. It is the holiday season, and your heating system is the most important appliance to add fun to the chilling weather. But, before anything, you must know how to use your heating system properly to use it to the best. You can call an experienced service provider to learn more about your heating system. JetAirCo is a renowned name for offering the best heating services in New York. We also offer furnace repair services and handle issues with your furnace, regardless of its type. Please call us to know more.

Schedule maintenance:

Before letting your system run always, you need to book an appointment with an HVAC service provider. Professionals will confirm that your system is in the good condition to meet your demand on cold days. If there is any issue, they will check and fix them immediately. Since your heating system takes a long break in summer, maintenance is the key to ensuring uninterrupted heating. We have received many calls from homeowners about their failing heater on cold days. This situation is no less pathetic than a nightmare. Call JetAirCo and schedule the furnace repair services in New York.

Maintenance of your heating system can increase the efficiency of your system. Professionals also perform some minor adjustments, which are really inexpensive as compared to the sudden breakdown of your system.

Heating system maintenance can meet different goals also. Professionals will perform repairs and fix the problem quickly during the maintenance process. A well-known HVAC service provider will let a homeowner know how the repair work will be performed and what the condition of your system is. You must invest in this service

Get ready for the winter:

Fall is the best time to keep your system winter-ready. It reduces the whole cost also. We all know that heating systems consume more energy than other appliances do. But, we come up with the best solutions to reduce energy bills in winter. Follow this trick:

Insulate your home:

Insulation can be considered profitable for you. Keep your doors, windows, and other areas insulated, which not only keeps your house warm but also reduces your heating bills.

Clear the air filters:

Heaters have air filters that filter the air from dust and dirt before it gets in and out. You need to clear the air filter every 1-3 months to ensure the best performance of your heating system. For any complicated issues in your heating system, you can call JetAirCo. We have the best team of professionals who work dedicatedly to enhance the efficiency of your heating system. We offer furnace repair services in New York.

Stay aware of your heating problems:

Loud noises from your system may be the hint of the underlying issues. Make your family member also aware of these complications so that they can also notice things early. Please contact us to know more details.

JetAirCo is a renowned HVAC company offering the best services for your heating and cooling systems. We offer services for your gas furnace, oil burner, boiler, and more. Please consult with us for more details.

Homeowners installed a furnace system to warm their place via the intermediary fluid movements, which might be hot water, air, or steam. An American study proves that a forced-air system is the 3 rd popular heating system in New York.

So, have you decided to buy a new furnace heating system for your house? Or want to upgrade your current system with a furnace? Then you can hire JetAirCo Furnace Repair Services. So, consult our professionals if you stay near the areas of Hauppauge, Smithtown, Northport, and Long Island, New York, and achieve everything related to your furnace. Besides, here we also discussed some vital aspects that you must consider before purchasing a furnace.

Necessary Things To Check While Buying a Furnace System:

Here, JetAirCo will prepare a list of the essential aspects you need to check before purchasing a furnace system for your home requirements.

1. Age of the Ductwork:

Updating your heating unit might not be sufficient to acquire the utmost efficiency of the heating system. Therefore, you often need to replace your air ductwork. So, before you purchase a new furnace, ensure that your existing air ductwork is compatible with the new heating system. However, the best way to perform the task is to hire JetAirCo Gas Furnace Repair Services to analyze the air ductwork condition and choose the best one for the new furnace system.

2. Climate:

Bear in mind, the cold weather intensity in your home can negatively affect the heating system type you select. As per JetAirCo professionals, the chilly the temperature is, the more effective the furnace system will be. Remember that choosing the best heating system will be essential as an inappropriate furnace can significantly increase your monthly electricity bills.

3. System Efficiency:

Do you know that almost 10% heat loss during energy conversion? However, as per Energy.Gov, a solar system is the most efficient option to make your home warm. Unfortunately, you can’t install a solar panel in every place as some areas don’t have plenty of the sun’s rays in their home.  However, as an alternative, people often use a furnace heating system that might provide hot air in an eco-friendly way. So, if you want to add a furnace to your place, try JetAirCo Heating Systems Services. From us, you will get our assistance at every step.

4. Size of Your House:

 If you wish to achieve the right temperature for your home, it’s necessary to consider the square foot area of the rooms you want to cover up. However, when you visit the market, you will see that each furnace model comes with different guidelines. Besides, you might also need to check the wall and ceiling conditions of your house. Undoubtedly, the manufacturer guidelines can help you to pick up the best heating system for your home. However, it can’t be the ultimate solution. Fortunately, if you consult with JetAirCo Oil Furnace & Boiler Repair service, our experts can help you decide the best furnace system for your purpose. Apart from this, if an issue arises, our technicians will thoroughly analyze it and fix the problem shortly.

Bottom Lines

You need to spend thousands of money to purchase a furnace system. Therefore, if you stay in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Service and seek our assistance to achieve your home needs.

Despite the way that we’re simply a month into the fall season, an ever-increasing number of mortgage holders are starting to set up their homes for winter to guarantee that they stay warm and agreeable all through the season. Regularly, they do this by supplanting their material frameworks or even their windows. Undoubtedly, these are good choices. However, do you know furnace maintenance tips can also keep your place comfortable?

Remember that experts suggest that you don’t just turn on your furnace in the winter months. This is because your heating system remains idle for a couple of months. Hence, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Services and after that activate your furnace system.

Things You Should Perform Before Turning on Your Furnace System:

In the undermentioned section, JetAirCo listed six crucial aspects you must consider before turning on your furnace during the winter months.

1. Check the Filters:

Before you activate your heating system, you must thoroughly check out the air filter. Keep in mind; you haven’t used your furnace for months. Hence, there’s a considerable possibility that dirt and lose particles might gather within your furnace. If you notice a dirty air filter, give JetAirCo Furnaces and Boilers Service a call and replace the clogged air filter before you use the furnace. A dirty air filter can reduce the indoor air quality as well as negatively affect your family member’s health, especially if you have children and senior citizens at home.

2. Be Sure that the Thermostat Works Correctly:

As per a 2018 survey, the thermostat can affect the furnace’s efficiency. Less efficiency means you might end up with higher energy bills. So, hire JetAirCo Gas Furnace Repair Services, and ensure that the thermostat works smoothly before using your furnace heating system. 

3. Search for Drafty Place:

Apart from checking the thermostat settings and air filter, you should search for drafty areas in your house. While doing this, you need to check your windows and doors. Keep in mind; if your windows and doors get damaged, air might escape from these places.  As a result, your furnace will take longer to make your place warm. Therefore, if you notice a draft in your house due to damaged doors and windows, instantly call JetAirCo Heating Systems Services and repair or replace them to prevent air from escaping.

4. Test Carbon Monoxide Detectors:

As per JetAirCo professional, it’s not just the thermostat you inspect before turning on your furnace; you should also see the carbon monoxide detectors to ensure that it still works properly. It’s an essential step as a damaged furnace can create toxic carbon monoxide gas into your house. Therefore, check your carbon monoxide detector thoroughly before turning on the furnace system in winter. However, if you don’t have sufficient time, hire JetAirCo Furnace Repair Services and resolve all your queries at the earliest time.

5. Remove Particles Placed Near the Furnace:

Before you activate your furnace for the winter months, ensure to take out items that are placed near your heating system. These particles often include furniture, old clothing, or any other loose particles. Hence, inspect every area surrounding your furnace and keep them away to a safe place. Besides, ensure that items don’t block the air vents and air ductwork as these might prevent air from circulating in your house.

6. Note Issues Experienced by your Furnace:

While inspecting your furnace heating system, it’s highly recommended to do an overall checking of the furnace unit. Also, when you perform this, take note of the common issues that your furnace system might experience. For example, you might hear unwanted sounds from your heating system, the furnace suddenly stops responding, and many others. If these problems arise, instantly call JetAirCo Heating Systems Maintenance Services to ensure your furnace’s peak performance.

Conclusion

So, if you search for someone who can assist you in maintaining and repairing your furnace at a pocket-friendly price, give JetAirCo  Furnace Repair Services a chance to become your service partner. Our humble request is to contact us if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York.

The heating system is an essential consideration during the winter season, even in areas where the temperature falls below freezing. However, heating system expenses might make a huge negative impact on your overall budget. Hence, it’s essential to choose the most efficient heating system for your home’s needs. So, whether you want to buy a new system or increase its heating efficiency, thoroughly read this guide provided by JetAirCo.

The JetAirCo Heating Installation & Repair team knows a lot about heating system-related queries. We offer our services in Hauppauge, Smithtown, Northport, and Long Island, New York. 

Choose the Most Efficient Heating System for your Purpose

In the rest of the blog, we have covered the best efficient heating system you can rely upon in 2021. However, you can anytime free to hire JetAirCo Heating Service for assistance.

1.   Heat Pumps

It’s a widely used heating system. A heat pump system conveys heat from one area to another, absorbs cold air, and circulates cold air during the winter months. However, during the cold season, it reserves its procedure and behaves like an AC. It means absorbing hot air from your home and distributing fresh cold air to every corner of your house. However, depending on the environment, the heat pump system might vary. For example, if you install a high efficient heat pump system in your place, it will consume lower energy and reduce the monthly electricity bills. Besides, these heating systems are safe to operate and don’t generate any harmful gas-for instance, carbon monoxide. However, if you face any challenges while running your heat pump system, give JetAirCo Heat Pump Repair Service a chance.

2.  Furnace

A furnace is the second popular heating system in New York. As per the 2019 survey, more than 60% of Americans install furnace heating systems into their homes and call JetAirCo Furnace Repair Services when required.

The Widely Used furnace heating systems are :

  1. Oil:  A oil furnace burns fuel oil to generate heat. If you want to install an oil furnace heating system, contact a supplier who can regularly supply fuel. However, you need to all-time monitor your oil furnace system to ensure the oil doesn’t run out when it requires most. Unfortunately, an oil furnace system might lead to several problems. If this situation occurs, you can hire JetAirCo Oil Furnace & Boiler service.
  2. Gas: In the gas furnace system, a local supplier will supply gas via a supply pipe installed in your house. Studies show that a gas furnace system might consume less energy than a heat pump system. Also, to maintain and repair your gas furnace system, you can reach JetAirCo Gas Furnace Repair Services anytime.

3. Boilers

Keep in mind that the boiler heating system is less common in houses than the heat pump and furnace system. However, a boiler can still serve your place in many ways. A boiler system produces hot water and then distributes it via radiators and pipes inside your house. AFUE marked the boiler heating system as the most efficient heating system. Besides for extracting heat from the exhaust gases, the boiler system uses a second heat exchanger. Unfortunately, if your boiler system suddenly stops responding, you can instantly get in touch with JetAirCo Boiler repair service.

Conclusion

Picking up the most efficient heating system isn’t an easy task. Also, to operate it at the highest performance, it’s essential to maintain and repair your heating system timely. JetAirCo Heating System Maintenance Repair Services offer high-quality heating system services near the Hauppauge, Smithtown, Northport, and Long Island, New York. Therefore, seek our assistance to choose the best heating system for your needs and fix the possible issues quickly.

If your furnace is leaking water, there is a reason to be worried. But, don’t panic because we are always ready to reach your place and fix the issue. But, if the problem is minor, you can check it yourself and can solve the issues easily. Don’t worry! We are guiding you on this journey. If you think that it is too technical, call our professional heating service providers and they repair the issue in no time. Don’t keep the problem unattended because it can turn into bigger and dangerous issues. Call JetAirCo or visit our branch in Long Island, New York.

To fix the water leakage issue from your furnace, you need to determine first what type of furnace you have. They are mainly two types – high-efficiency condensing furnace and a conventional furnace.

Now, you are probably thinking about how to check which type of furnace you have. We are helping you with this.

If your furnace has a white PVC vent pipe on its side or its top, you have a high-efficiency furnace. If your furnace has metal pipes, you have a conventional furnace. For any furnace and boiler repairing in Smithtown, JetAirCo is near to you. Call us and get the service in no time.

The leakage repairing process will change according to your furnace. We are describing it here in brief.

For high-efficiency condensing furnace:

If you have a high efficiency condensing furnace and it leaks, it is a very common thing and is not leading to serious issues. The leakage can be caused by blocked condensate drains, condensate pump problems, or problems with the condensation line.

High-efficiency furnaces have two heat exchangers, unlike a conventional furnace that has one. These heat exchangers absorb too much heat that converts exhaust gas into the liquid state. The condensation then drains out through the condensate line. When your furnace is maintained properly, the water drains out properly without any leakage.

If your furnace system has any clog or leakage, the water accumulates around your furnace. If your high efficiency condensing furnace is leaking, call JetAirCo. Our experienced team can handle everything perfectly.

You must check the drain trap to fix the issue on your own. But if anything is broken in the system, you need professional help. Call JetAirCo and repair your furnace within your budget.

For conventional furnace:

When there is water leakage from your conventional furnace, the reasons are many, including leaky humidifier, improper vent pipe, and leakage while AC is on.

Sometimes, furnaces have an in-built humidifier. If it is clogged or has a leak, it causes water around your furnace. Improperly designed vent pipes are also the reason for the water leakage. These pipes drain away combustion gases from your house. If the pipes get clogged, the gases cool down and turn into moisture.

If you find water while your AC is on, it means that your AC causes it, not your furnace. Since the drainpipe sits top or next to your furnace, it seems your furnace causes the water. JetAirCo is one of the Best Heating Repair Services in Hauppauge, and we help many homeowners to fix their heating system problems. Call us to book your service appointment. Our main branch is located in Long Island, New York.