How Do You Clean An Air Conditioning Unit?

If you opt for the best Air Conditioning Maintenance in the USA, contact JetAirCo for remarkable services.

How Do You Clean An Air Conditioning Unit?

Cleaning an air conditioner is a crucial maintenance procedure contributing to its effective performance and durability. You can also do it yourself, but if you fail, contact JetAirCo in the USA for Air Conditioning Maintenance. We also provide Air conditioner repair services and Air Conditioning Installation services at an affordable cost.

Let’s look at the procedure for cleaning the air conditioning unit:-

  • Turn off the power
  • Remove debris
  • Access the air filter
  • Clean or replace the air filter
  • Clean the evaporator coils
  • Clean the condenser coils
  • Spray the coils
  • Condensate drain cleaning
  • Reassemble and restore power 

Turn off the power:

First, turn off the electricity to the air conditioner out of caution. Find the electrical disconnect switch nearby the appliance or turn off the circuit breaker for the air conditioner. 

Remove debris:

Remove transparent material and lightly Clean the device’s exterior using a brush or your gloved hands. Make sure the area around the device is also free of clutter. 

Access the air filter:

Depending on the type of air conditioning equipment, the air filter may be inside the air handler unit or behind the front grille. Remove the front grille or access panel using a screwdriver or tool if necessary. Carefully remove the air filter. 

Clean or replace the air filter: 

If reusable, hoover it with a brush attachment to remove collected dust and dirt before cleaning or replacing it. Alternatively, you can wash the filter in water and a mild detergent, ensuring it is scorched before reinstalling. Replace the filter with a new one if it is a disposable model or is damaged. 

If you can’t manage it yourself, then opt for any Air Conditioning Maintenance or Air Conditioning Installation services. If you need any assistance in the USA, contact JetAirCo. 

Clean the evaporator coils:

Find them within the air handler unit and clean them. The air filter is usually where you’ll find these. Use a soft brush or comb and gently remove any visible dust or dirt. Avoid damaging or bending the delicate fins. 

Clean the condenser coils:

Head outdoors to the condenser unit, often found on the building’s exterior. Cleaning the condenser coils of dirt, leaves, and other debris requires using a brush or a Hoover with a brush attachment. Verify that the fins are straight and spotless. 

Spray the coils:

To remove tenacious dirt and grime, connect the spray nozzle to a water hose and softly spray the evaporator and condenser coils. Don’t use high-pressure water, as it can harm the coils. 

Condensate drain cleaning:

Find the condensate drain line, often a PVC pipe, and check it for obstructions. Use a tiny brush to remove obstructions or blow compressed air into the pipe. Ensure there are no obstacles in the drain line to prevent water accumulating. 

Reassemble and restore power:

Reinsert the air filter, fasten the front grille or access panel, and ensure everything is securely fastened to reassemble the vehicle and regain control. By activating the electrical disconnect button or switching the circuit breaker, you can restore power to the appliance. 

Closing Line

Cleaning your AC regularly will help it stay efficient and enhance the air quality inside your home. So if you fail to do Air Conditioning Maintenance at home, opt for professionals like JetAirCo in the USA. We have expert technicians who provide the best Air conditioner repair services and Air Conditioning Installation services.

Leave a Reply

Your email address will not be published. Required fields are marked *