The efficiency of your heating system is important because it reduces your electricity costs. So, always choose the high-efficiency heating system that reduces energy consumption. When you are looking for a heating system, you will get plenty of choices that may make you confused. You can consult an experienced HVAC service provider that has years of knowledge in the field. JetAirCo is a trusted company offering HVAC maintenance services in Smithtown, Northport, and other areas of New York.

Having an experienced company by your side will help you in many ways. Apart from the high efficiency, you must check the size of your system. It is an important factor to reduce the electricity bills. If the size is too small or too low, you end up paying extra when it comes to the energy cost. You can call JetAirCo and choose the best heating system that meets your requirement if you are planning to buy the most efficient heating system for your house.

When it comes to choosing a high-efficiency heating system, a heat pump comes first in mind. Heat pumps move heat from one place to another, which needs less electricity to operate. In the summer season, it captures heat from your home and dumps it outside. In the winter season, the heat pumps bring outside heat to your home. The best thing is that it does not run on fossil fuel, so it does not generate combustion gas that affects the environment.

If you want to buy a quality heat pump, you can consult with us. JetAirCo offers the best heating system maintenance in Long Island and other places. The heating system also comes in a variety. Two types of heating systems are very common.

Air-Source Heat Pump:

The heat pump uses the heat exchange properties of the refrigerant for removing or bringing heat from or in your environment. When heating, it captures heat from outside and brings in your home environment. When cooling, it removes heat from the inside air.

Geothermal heat pump:

This heat pump uses soil or the outside water body near your house. Pipes are installed several feet deep from the surface in a vertical loop system. It provides the most efficient type of heating, lowering bills up to 70%. The initial investment is higher, but the long-term saving is also countable.

Furnaces:

Another common type of heating system is a furnace. Gas furnaces have huge popularity in America. Although old models are not very efficient, new models will meet your demands since it offers advanced technologies.

Gas furnaces run on the natural gas system, which local authority supplies. Its operation cost is lower than the heat pump, but the efficiency is also very low. Oil furnaces another type of furnace, and local authority supplies fuel oil in bulk to reduce the operation costs. You can also opt for electricity furnaces.

You can even choose boilers also for your home heating system. The best way to pick the right heating system is to ask an experienced one. JetAirCo will meet your demands. It offers Heating Maintenance Services in Smithtown and other parts of New York. Contact us for more details.

Homeowners installed a furnace system to warm their place via the intermediary fluid movements, which might be hot water, air, or steam. An American study proves that a forced-air system is the 3 rd popular heating system in New York.

So, have you decided to buy a new furnace heating system for your house? Or want to upgrade your current system with a furnace? Then you can hire JetAirCo Furnace Repair Services. So, consult our professionals if you stay near the areas of Hauppauge, Smithtown, Northport, and Long Island, New York, and achieve everything related to your furnace. Besides, here we also discussed some vital aspects that you must consider before purchasing a furnace.

Necessary Things To Check While Buying a Furnace System:

Here, JetAirCo will prepare a list of the essential aspects you need to check before purchasing a furnace system for your home requirements.

1. Age of the Ductwork:

Updating your heating unit might not be sufficient to acquire the utmost efficiency of the heating system. Therefore, you often need to replace your air ductwork. So, before you purchase a new furnace, ensure that your existing air ductwork is compatible with the new heating system. However, the best way to perform the task is to hire JetAirCo Gas Furnace Repair Services to analyze the air ductwork condition and choose the best one for the new furnace system.

2. Climate:

Bear in mind, the cold weather intensity in your home can negatively affect the heating system type you select. As per JetAirCo professionals, the chilly the temperature is, the more effective the furnace system will be. Remember that choosing the best heating system will be essential as an inappropriate furnace can significantly increase your monthly electricity bills.

3. System Efficiency:

Do you know that almost 10% heat loss during energy conversion? However, as per Energy.Gov, a solar system is the most efficient option to make your home warm. Unfortunately, you can’t install a solar panel in every place as some areas don’t have plenty of the sun’s rays in their home.  However, as an alternative, people often use a furnace heating system that might provide hot air in an eco-friendly way. So, if you want to add a furnace to your place, try JetAirCo Heating Systems Services. From us, you will get our assistance at every step.

4. Size of Your House:

 If you wish to achieve the right temperature for your home, it’s necessary to consider the square foot area of the rooms you want to cover up. However, when you visit the market, you will see that each furnace model comes with different guidelines. Besides, you might also need to check the wall and ceiling conditions of your house. Undoubtedly, the manufacturer guidelines can help you to pick up the best heating system for your home. However, it can’t be the ultimate solution. Fortunately, if you consult with JetAirCo Oil Furnace & Boiler Repair service, our experts can help you decide the best furnace system for your purpose. Apart from this, if an issue arises, our technicians will thoroughly analyze it and fix the problem shortly.

Bottom Lines

You need to spend thousands of money to purchase a furnace system. Therefore, if you stay in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Service and seek our assistance to achieve your home needs.

The heating system is an essential consideration during the winter season, even in areas where the temperature falls below freezing. However, heating system expenses might make a huge negative impact on your overall budget. Hence, it’s essential to choose the most efficient heating system for your home’s needs. So, whether you want to buy a new system or increase its heating efficiency, thoroughly read this guide provided by JetAirCo.

The JetAirCo Heating Installation & Repair team knows a lot about heating system-related queries. We offer our services in Hauppauge, Smithtown, Northport, and Long Island, New York. 

Choose the Most Efficient Heating System for your Purpose

In the rest of the blog, we have covered the best efficient heating system you can rely upon in 2021. However, you can anytime free to hire JetAirCo Heating Service for assistance.

1.   Heat Pumps

It’s a widely used heating system. A heat pump system conveys heat from one area to another, absorbs cold air, and circulates cold air during the winter months. However, during the cold season, it reserves its procedure and behaves like an AC. It means absorbing hot air from your home and distributing fresh cold air to every corner of your house. However, depending on the environment, the heat pump system might vary. For example, if you install a high efficient heat pump system in your place, it will consume lower energy and reduce the monthly electricity bills. Besides, these heating systems are safe to operate and don’t generate any harmful gas-for instance, carbon monoxide. However, if you face any challenges while running your heat pump system, give JetAirCo Heat Pump Repair Service a chance.

2.  Furnace

A furnace is the second popular heating system in New York. As per the 2019 survey, more than 60% of Americans install furnace heating systems into their homes and call JetAirCo Furnace Repair Services when required.

The Widely Used furnace heating systems are :

  1. Oil:  A oil furnace burns fuel oil to generate heat. If you want to install an oil furnace heating system, contact a supplier who can regularly supply fuel. However, you need to all-time monitor your oil furnace system to ensure the oil doesn’t run out when it requires most. Unfortunately, an oil furnace system might lead to several problems. If this situation occurs, you can hire JetAirCo Oil Furnace & Boiler service.
  2. Gas: In the gas furnace system, a local supplier will supply gas via a supply pipe installed in your house. Studies show that a gas furnace system might consume less energy than a heat pump system. Also, to maintain and repair your gas furnace system, you can reach JetAirCo Gas Furnace Repair Services anytime.

3. Boilers

Keep in mind that the boiler heating system is less common in houses than the heat pump and furnace system. However, a boiler can still serve your place in many ways. A boiler system produces hot water and then distributes it via radiators and pipes inside your house. AFUE marked the boiler heating system as the most efficient heating system. Besides for extracting heat from the exhaust gases, the boiler system uses a second heat exchanger. Unfortunately, if your boiler system suddenly stops responding, you can instantly get in touch with JetAirCo Boiler repair service.

Conclusion

Picking up the most efficient heating system isn’t an easy task. Also, to operate it at the highest performance, it’s essential to maintain and repair your heating system timely. JetAirCo Heating System Maintenance Repair Services offer high-quality heating system services near the Hauppauge, Smithtown, Northport, and Long Island, New York. Therefore, seek our assistance to choose the best heating system for your needs and fix the possible issues quickly.

The solar heating system has come up with many benefits for saving your energy consumption cost, which is the prime thing for having a heating system. But, you cannot install a solar heating system as easily as you can install other types of systems. You need permission from your local authorities and neighbors. You are even asked to follow the building code for the installation. JetAirCo has been one of the old heating system repair service providers in New York. Although we have handled different heating systems, we are popular for furnace and boiler installation, heat pump services, and more. If you are not satisfied with your HVAC systems, you will get us by your side. Contact us to know more.

Here, we have discussed the things you need to complete beforehand for installing your solar heating system.

Due to the complex process, some households change their thoughts and opt for the regular ones for their comfort and luxury. Remember that a solar heating system is not only good for your saving but also the best option for nature and the environment. It uses renewable energy to heat your house.

You need to investigate your local building codes, zoning ordinances, and other special regulations attached to it. Obtain a building permit if you want to install the heating system on an existing building.

Many a time, community and municipality area impose some rules for installing the system. You may go through the tough process of obtaining permission. The installation is mainly a local issue, and you need to find a legal way to get this job done.

We are experienced in the field, and we want to make you aware of all the problems that you may experience with your solar heating system installation. Building codes are the most crucial thing in this case, and the common problems associated with it are:

  1. Exceeding roof load
  2. Wrong wiring
  3. Unacceptable heat exchangers
  4. Tampering with potable water supplies

You can consider special area regulations, including the local community, subdivisions, and homeowner’s association agreement. The best thing that you can do to avoid any legal issues is to contact your local jurisdiction’s zoning and building enforcement divisions and homeowner’s association.

You can contact us for your heating system installation process. We offer a wide range of services for your home heating systems. We offer gas furnace repair service, oil burner repair service, and other services for maintaining your systems.

You can contact us for more details. We have a main branch in Long Island, New York. But, we serve in other areas also, including Smithtown, Northport, and more.

Everyone wants to have the most efficient home heating system for the house. It not only cuts down your energy cost but also keeps your environment safe, especially from the carbon footprint. If you want to buy the best heating system for your house, call a professional for advice. Remember that taking help from an HVAC professional service provider will always benefit you. Installing your heating system needs expert knowledge. So, hire a company that can help you find the best heating system for you.

JetAirCo is an HVAC service provider that fixes your problem quickly and enhances your home comfort in the best way. The company has a wide presence in areas like Hauppauge, Smithtown, Northport, and in more areas of New York

Choosing the right heating system is a necessary thing for your house. An HVAC expert can give you the right decision when it comes to the home heating system. There are various factors that determine which type of heating system you need.

As a buyer, you can gather knowledge about the efficiency rating of your heating system. AFUE (Annual Fuel Utilization Efficiency) is the measure that determines the amount of energy that is used by the heating system.

If you use a heat pump, HSPF instead of AFUE measures the efficiency of the heating system. SEER ratings are for measuring the efficiency of the heat pump in the cooling mode.

JetAirCo can help you get the best heating system for your home. We have a branch in Long Island, New York. But, our active areas are vast, including Hauppauge, Smithtown, North Port, and more. Our experienced heating system provider will visit your place and analyze your requirement to determine the best system for your space.

Picking the right type of heating system mostly depends on where you live. The climate is an essential factor for your heating system. We also consider your house built to choose the best system for you.

Heat pumps and furnaces are the two primary types of heating systems for residential use. We describe these systems to offer you a better idea of energy efficiency.

Heat pumps:

Heat pumps move the air using different methods to keep your house warm or cold, depending on your needs.  Air-source heat pumps bring down the temperature with the help of refrigerant. When you use the system in the heating mode, it extracts heat from the outside air. This type of heating system will work efficiently if you have moderate weather. But in freezing climates, this heating system does not work efficiently.

A geothermal heat pump uses the soil or water source to capture or release the heat. It is more efficient than the air-source heat pump. It reduces energy consumption and saves energy costs. But, it requires a higher installation charge.

Furnaces:

Furnaces are a common type of heating system. You can use gas, oil, or electricity to run your furnace. Gas furnaces are the cheapest ones, but they are not as efficient as air-source energy or electric furnaces. Check the AFUE rating and pick the higher one for better efficiency. JetAirCo will make your task easier by offering the best system for your house. We check your requirement and come up with the best system. If you need heating system services in Hauppauge, Smithtown, North Port, you can contact us. We will reach your place as soon as you contact us.

If you are using a gas furnace, you may be told to take extra precautions since gas furnaces create more unsafe situations compared to the other types. Sometimes, the concerns are exaggerated. Using gas for domestic and industrial purpose is very common. If your house has a natural gas line, you can do many things with it. You can also heat your furnace. If you are worried about the safety issue for your furnace, you must consult with a professional heating service. JetAirCo is a professional name that helps you repair your heating systems properly. We are offering HVAC maintenance and repair service in Smithtown, Northport, and Long Island. If you have any query regarding your heating system, we can solve your every problem.

 If you are thinking that gas furnace is unsafe to use. Time has come to check reality.

Here, we try to clear your doubts by presenting to you the facts of using a gas furnace.

Gas furnaces have safety measures:

These days, manufacturers introduce advanced safety measures to the gas furnaces to offer you a protected environment. You can get many built-in measures for your safety. So, thinking about the danger from your gas furnaces is wrong.

Carbon Monoxide Detector for Early Warnings:

Gas furnaces need a carbon monoxide detector to offer you a safe environment for your health. Carbon Monoxide (CO) is an odourless, colourless, and tasteless gas. This is why you need a detector that makes you alert about the amount of gas. These detectors are placed in different rooms and keep your living safe. These days, smoke alarm systems also come up with the CO detectors.

Routine maintenance:

Routine maintenance is required for your every HVAC appliance. Such maintenance should be carried out by experts because they are well-aware of the technical parts and they also take extra measures where the chances of faults are high. If you are using a gas furnace, a professional heating service provider pays attention to the heat exchanger and the gas lines. These are the most vulnerable areas when it comes to cracking and leakage. Hire JetAirCo for your heating system repair service. We are active in areas like Smithtown, Northport, and Long Island. Consult with our experts and come up with the right solutions for your HVAC systems.

Safety steps:

In the fall, your heater needs maintenance from the professionals. It improves the working condition of your heating system. In the winter, you also need to take extra maintenance steps for your heating system. Change the air filter in every 1 or 3 months. It prevents overheating. Clean the area around the cabinet and don’t keep any inflammable items around it.

JetAirCo is helping many houses for getting a comfortable temperature for your living. If you need any help for the maintenance of your HVAC system, we have a branch in Long Island, New York. Visit us for more details.  

You may not be aware of the type of heating system you have because you think it unnecessary. But, when your system gets stopped suddenly, you do all research to know about the system and to correctly describe the faults to a professional heating service provider. Knowing about your heating will not only help you to check the faults on your own, but you can also manage your system in a better way. This extends the life duration of your system and you can enjoy the comfort for a long time without any interruption. Contact JetAirCo for your heating maintenance, and you will also get instant service. They have a branch in Long Island, New York. But, their services are popular in areas like Hauppauge, Smithtown, Northport, and more.

You must know which type of heating system you have, and this knowledge will help you take care of your system in a better way.

Furnaces and heaters:

These systems generally use forced air process to heat your space and they are run by gas, propane, oil, or electricity. In the furnace, the air is heated and then is distributed into your rooms by ductwork. But, it is a tough decision to choose which fuel you want for your system. Call JetAirCo and get the right thing for your heating system. They are actively operating in areas like Hauppauge, Smithtown, Northport, and more.

Heat pump:

A heat pump is another popular version of your heating system, and it is commonly used in the moderate climate area. The system can be used for both heating and cooling your space as it moves heat from the cold place to the warm space, depending on your needs. It is basically a split system with both indoor cabinet and outdoor metal housing components. The system uses duct to distribute the heat, but you can opt for the ductless version also.

Call JetAirCo and find the right heating solution for your house. Our experienced heating professionals will always by your side. No matter which type of system you have, you will get a premium quality service from us. If you need a heating system service in Hauppauge, JetAirCo is near to you.

If you do not know whether you have a heat pump or an air conditioner, check the outdoor unit and you will get a label telling that it is a heat pump. If you find nothing on the unit, Google the model number and you will get detail about the system. Check the brass pipes also that reside in the condensing unit and these pipes are unique to the heat pump. If it also not works for you, check your thermostat for the emergency heating setting which is available for the heat pump only.

Geothermal heat pump:

You can also invest in the geothermal heat pump which is an energy-efficient option for heating your house. It uses natural heat from the earth to cool or warm air. Along with the benefits, some drawbacks of the systems are the high upfront cost and the disruption in the nearby landscape.

Boilers:

Boilers have two components – a furnace and a vessel where water turns into steam. This system can use electricity, natural gas, propane, and oil.

If you need a heating solution in New York, JetAirCo is the best place to visit. You can consult with our experienced professionals for your heating service. We are active in areas like Smithtown, Northport, Hauppauge, and Long Island.

If your furnace is leaking water, there is a reason to be worried. But, don’t panic because we are always ready to reach your place and fix the issue. But, if the problem is minor, you can check it yourself and can solve the issues easily. Don’t worry! We are guiding you on this journey. If you think that it is too technical, call our professional heating service providers and they repair the issue in no time. Don’t keep the problem unattended because it can turn into bigger and dangerous issues. Call JetAirCo or visit our branch in Long Island, New York.

To fix the water leakage issue from your furnace, you need to determine first what type of furnace you have. They are mainly two types – high-efficiency condensing furnace and a conventional furnace.

Now, you are probably thinking about how to check which type of furnace you have. We are helping you with this.

If your furnace has a white PVC vent pipe on its side or its top, you have a high-efficiency furnace. If your furnace has metal pipes, you have a conventional furnace. For any furnace and boiler repairing in Smithtown, JetAirCo is near to you. Call us and get the service in no time.

The leakage repairing process will change according to your furnace. We are describing it here in brief.

For high-efficiency condensing furnace:

If you have a high efficiency condensing furnace and it leaks, it is a very common thing and is not leading to serious issues. The leakage can be caused by blocked condensate drains, condensate pump problems, or problems with the condensation line.

High-efficiency furnaces have two heat exchangers, unlike a conventional furnace that has one. These heat exchangers absorb too much heat that converts exhaust gas into the liquid state. The condensation then drains out through the condensate line. When your furnace is maintained properly, the water drains out properly without any leakage.

If your furnace system has any clog or leakage, the water accumulates around your furnace. If your high efficiency condensing furnace is leaking, call JetAirCo. Our experienced team can handle everything perfectly.

You must check the drain trap to fix the issue on your own. But if anything is broken in the system, you need professional help. Call JetAirCo and repair your furnace within your budget.

For conventional furnace:

When there is water leakage from your conventional furnace, the reasons are many, including leaky humidifier, improper vent pipe, and leakage while AC is on.

Sometimes, furnaces have an in-built humidifier. If it is clogged or has a leak, it causes water around your furnace. Improperly designed vent pipes are also the reason for the water leakage. These pipes drain away combustion gases from your house. If the pipes get clogged, the gases cool down and turn into moisture.

If you find water while your AC is on, it means that your AC causes it, not your furnace. Since the drainpipe sits top or next to your furnace, it seems your furnace causes the water. JetAirCo is one of the Best Heating Repair Services in Hauppauge, and we help many homeowners to fix their heating system problems. Call us to book your service appointment. Our main branch is located in Long Island, New York.

Choosing the right size of a boiler is important when it comes to your comfort and luxury. Call a professional to guide you since you are not aware of different parts of the boilers. JetAirCo is an experienced name that understands different types of heating systems and they can guide you to buy the most needed system for your home. Since it is an investment, you must consult a professional for this. The company is offering oil furnace and boiler furnace repair services in Hauppauge, Smithtown, Northport, and more.

Heating size matters a lot to offer you a comfortable environment. The system heats the temperature when the outside air remains cold. Here, the size of the boiler does not talk about the physical size of it; rather it defines the power of the unit that is known as the output rating.

The output rating of a boiler is measured with the kilowatts (kW) unit. If you have a too big size, it increases energy consumption and leads to the wastage of fuel. A too-small boiler will not provide you with a comfortable temperature.

If you are confused about which boiler size fits your house, you can contact us. JetAirCo has a branch in Long Island but is a popular name in areas like Hauppauge, Smithtown, Northport, and in more areas.  Hire our boiler installer in Hauppauge.

You can seek help from an expert for your boiler system. But knowing different types will help you make the right decision even more prominently.

There are types of boilers are common in the market and they are:

  1. Combi Boilers
  2. System Boilers
  3. Regular Boilers

Combi boilers:

Combi boilers are a single unit and it is perfect for the small to medium size homes with one or two bathrooms. It is the most cost-effective solution for your home. It offers the central heating and hot water supply as per your demands. It does not need an additional tank or cylinder that saves space in your house.

System Boilers:

System boilers are similar to combi boilers that get water from the mains. They provide a heating system along with storing domestic hot water in a cylinder. It does not need additional space for the cylinder, although.

Regular boiler:

A regular boiler is the oldest heating system and this type of heating system is found in the traditional properties. It comes up with an extension tank and a cylinder.

These are the common types of heating system you have. Consult with JetAirCo and choose the right quality heating boiler for your house. When it comes to size, you need an expert to pick the right size. Find out the best solution from JetAirCo. Get the best boiler service in Northport and in other areas of New York. Call our service.