A furnace is the common heating system source of many households. If you want to keep your heating system in perfect conditions, you must contact an HVAC service provider. They have the professional knowledge to maintain your system smartly. You require HVAC services for your furnace routine maintenance. Many call a service provider after their system gets damaged. But, you need to take care of your system before it completely stops working. Hire JetAirCo service provider and stay relaxed about your heating system. We offer HVAC maintenance services in Smithtown, Northport, Hauppauge, and more.

What does furnace maintenance include?

Furnace maintenance should be taken care of by a heating professional. We check all components and perform adjusting, cleaning, testing, and lubricating of the parts. You will get a complete service from us.

Vent systems and air intake grills are the parts that need cleaning to reduce any blockage. We inspect those parts and clearer everything. We check the heat exchanger to find out the damage and protect it from corrosion. Removing debris from blowers, we keep your system clean and improve your air quality.

The other parts we check are:

  1. Blower motor and its amp draw
  2. All electrical and damaged wires replacement
  3. Burner and flame sensor
  4. Thermostat calibration
  5. Moving parts lubrication
  6. Air filter checking
  7. System safety control and start-up cycles

For oil and gas furnaces, we offer some extra care to keep your system perfect in condition.

  1. Checking fuel lines for identifying leaks.
  2. Gas pressure testing, burner, and the pilot.

How often you need furnace maintenance?

You can opt for the annual furnace maintenance since it reduces all the damage-causing problems and helps your system run perfectly. If any of your house members have asthma or any respiratory problem, you must get your system checked at least once a year.

The ideal time for your system maintenance is before the cold season.  Call JetAirCo for your heating system maintenance in Smithtown, Northport, and other areas. We offer prompt services to solve your heating system maintenance. If you live in New York, you can easily connect with us.

If you maintain your heating, you will get many benefits. Saving money comes first on the list. It is very obvious. A perfectly well furnace also runs effectively without consuming extra energy. Besides, you can also avoid sudden breakage, which needs costly replacement.

Some heating system manufacturing company mentions that only routine check of the system keeps the warranty terms valid. It means that if you maintain your system properly, manufacturers will cover the cost of any damage that happens under their warranty terms.

If you need heating maintenance services, contact JetAirCo. We are active in Smithtown, Northport, Long Island, and other areas of New York. Please visit our official page for more details.

The efficiency of your heating system is important because it reduces your electricity costs. So, always choose the high-efficiency heating system that reduces energy consumption. When you are looking for a heating system, you will get plenty of choices that may make you confused. You can consult an experienced HVAC service provider that has years of knowledge in the field. JetAirCo is a trusted company offering HVAC maintenance services in Smithtown, Northport, and other areas of New York.

Having an experienced company by your side will help you in many ways. Apart from the high efficiency, you must check the size of your system. It is an important factor to reduce the electricity bills. If the size is too small or too low, you end up paying extra when it comes to the energy cost. You can call JetAirCo and choose the best heating system that meets your requirement if you are planning to buy the most efficient heating system for your house.

When it comes to choosing a high-efficiency heating system, a heat pump comes first in mind. Heat pumps move heat from one place to another, which needs less electricity to operate. In the summer season, it captures heat from your home and dumps it outside. In the winter season, the heat pumps bring outside heat to your home. The best thing is that it does not run on fossil fuel, so it does not generate combustion gas that affects the environment.

If you want to buy a quality heat pump, you can consult with us. JetAirCo offers the best heating system maintenance in Long Island and other places. The heating system also comes in a variety. Two types of heating systems are very common.

Air-Source Heat Pump:

The heat pump uses the heat exchange properties of the refrigerant for removing or bringing heat from or in your environment. When heating, it captures heat from outside and brings in your home environment. When cooling, it removes heat from the inside air.

Geothermal heat pump:

This heat pump uses soil or the outside water body near your house. Pipes are installed several feet deep from the surface in a vertical loop system. It provides the most efficient type of heating, lowering bills up to 70%. The initial investment is higher, but the long-term saving is also countable.

Furnaces:

Another common type of heating system is a furnace. Gas furnaces have huge popularity in America. Although old models are not very efficient, new models will meet your demands since it offers advanced technologies.

Gas furnaces run on the natural gas system, which local authority supplies. Its operation cost is lower than the heat pump, but the efficiency is also very low. Oil furnaces another type of furnace, and local authority supplies fuel oil in bulk to reduce the operation costs. You can also opt for electricity furnaces.

You can even choose boilers also for your home heating system. The best way to pick the right heating system is to ask an experienced one. JetAirCo will meet your demands. It offers Heating Maintenance Services in Smithtown and other parts of New York. Contact us for more details.

Homeowners installed a furnace system to warm their place via the intermediary fluid movements, which might be hot water, air, or steam. An American study proves that a forced-air system is the 3 rd popular heating system in New York.

So, have you decided to buy a new furnace heating system for your house? Or want to upgrade your current system with a furnace? Then you can hire JetAirCo Furnace Repair Services. So, consult our professionals if you stay near the areas of Hauppauge, Smithtown, Northport, and Long Island, New York, and achieve everything related to your furnace. Besides, here we also discussed some vital aspects that you must consider before purchasing a furnace.

Necessary Things To Check While Buying a Furnace System:

Here, JetAirCo will prepare a list of the essential aspects you need to check before purchasing a furnace system for your home requirements.

1. Age of the Ductwork:

Updating your heating unit might not be sufficient to acquire the utmost efficiency of the heating system. Therefore, you often need to replace your air ductwork. So, before you purchase a new furnace, ensure that your existing air ductwork is compatible with the new heating system. However, the best way to perform the task is to hire JetAirCo Gas Furnace Repair Services to analyze the air ductwork condition and choose the best one for the new furnace system.

2. Climate:

Bear in mind, the cold weather intensity in your home can negatively affect the heating system type you select. As per JetAirCo professionals, the chilly the temperature is, the more effective the furnace system will be. Remember that choosing the best heating system will be essential as an inappropriate furnace can significantly increase your monthly electricity bills.

3. System Efficiency:

Do you know that almost 10% heat loss during energy conversion? However, as per Energy.Gov, a solar system is the most efficient option to make your home warm. Unfortunately, you can’t install a solar panel in every place as some areas don’t have plenty of the sun’s rays in their home.  However, as an alternative, people often use a furnace heating system that might provide hot air in an eco-friendly way. So, if you want to add a furnace to your place, try JetAirCo Heating Systems Services. From us, you will get our assistance at every step.

4. Size of Your House:

 If you wish to achieve the right temperature for your home, it’s necessary to consider the square foot area of the rooms you want to cover up. However, when you visit the market, you will see that each furnace model comes with different guidelines. Besides, you might also need to check the wall and ceiling conditions of your house. Undoubtedly, the manufacturer guidelines can help you to pick up the best heating system for your home. However, it can’t be the ultimate solution. Fortunately, if you consult with JetAirCo Oil Furnace & Boiler Repair service, our experts can help you decide the best furnace system for your purpose. Apart from this, if an issue arises, our technicians will thoroughly analyze it and fix the problem shortly.

Bottom Lines

You need to spend thousands of money to purchase a furnace system. Therefore, if you stay in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Service and seek our assistance to achieve your home needs.

A boiler system is the 2nd popular heating system in New York after the HVAC system. As per 80% of New York citizens, a boiler can significantly adjust the house temperature during the too cold climate. But the problem is, there are many boiler systems available in the market, and picking up the best one will not be a cup of tea. Fortunately, JetAirCo Boiler Installer service is here to hold your hand. So, if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York, consult our experts at any time a day or night. Besides, JetAirCo also discusses some best-recommended boiler systems that you can use in 2021 and the future.

1. Slant-Fin Sentry Boiler (Consumer Rating 4.7)

It’s a gas hot water boiler with an efficiency of 84.4% AFUE. The Slant-Fin Sentry boiler comes with several advanced features, including a LED display to monitor water temperature, a pre-purge option to absorb heat, and others. This gas boiler system is available in five sizes. However, if an issue occurs while operating your heating system, hire JetAirCo Boiler repair service and fix your issues.

Pros:

  1. As per homeowners, it’s the cheapest boiler.
  2. Customers review that the boiler is quite effective.
  3. Many owners state that a Slant-Fin Sentry boiler lasts more than any other heating system.

Cons:

  1. According to many homeowners, this is a bulky boiler and takes too much space.
  2. This boiler often takes longer to create hot air.

2. Lennox GWE-IE Boiler (Consumer Rating 4.8)

The Lennox GWE-IE is a gas modulating water boiler with an efficiency rating of up to 95% AFUE. Advanced features, including an electronic ignition switch, sound reduction, can be found in this boiler system. Besides, the mesh burner is corrosion resistant, and the heat exchanger tube is self-cleaning. As per a 2019 study, the Lennox GWE-IE Boiler can reduce up to 50% energy cost than conventional boilers.

Pros:

  1. This boiler system can run automatically.
  2. Several homeowners reported that this boiler system could significantly reduce your monthly energy bills.
  3. The boiler system could deliver up to 95% efficiency.

Cons:

  1. Costly purchase price
  2. One study claimed that the boiler unit needs continuous repairs, which can be expensive. However, if you call JetAirCo Oil Furnace & Boiler Repair, you can instantly resolve all your boiler system-related issues at the earliest time.

3. Slant-Fin Galaxy GXHA Boiler ( Consumer Rating 3.9)

It’s a gas-fired high-performance steam boiler system with an efficiency rating of 81.3% AFUE. The Slant-Fin Galaxy GXHA boiler comes with an optional tankless heater, a monitor display, and an intermittent pilot ignition to control the system function. Besides, it contains a specially made speed skimmer that releases loosen particles and dust via drain faucet to deduce periodic cleaning time.

Pros:

  1. One study shows that the boiler can significantly drop the energy bill.
  2. Lots of homeowners claim that it heated water during winter.

Cons:

  1. The purchasing cost will be high.
  2. One review mentioned that many homeowners face difficulties turning on/off the boiler system.

4. Bosch Greenstar Boiler ( Consumer Rating 4.5)

The Bosch Greenstar boiler can significantly reduce nitrous oxide emissions and achieves up to 95% efficiency. You can install this boiler as a wall-mounted or floor-standing unit.

Pros:

  1. It comes with 96.1% AFUE and can come as either a combi unit or space heating boiler.
  2. Many homeowners reported that this boiler makes your place warm fastly.
  3. It provides higher efficiency as compared to other heating systems.

Cons:

The only disadvantage of this boiler system is that you need to replace the motor fan every ten years.

Conclusion

These are the top four boiler systems that you can purchase in 2021. However, being an electronic device, issues are quite common with your boiler system. Fortunately, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, you can contact JetAirCo Boiler Installer Maintenance Repair service at any time and seek our assistance.

If you suffer from allergies, you might hear the statement that a furnace will not be the best choice. As per a 2019 study, the furnace can push allergens via the air, making it difficult for you to breathe, which might worsen the allergies symptoms. However, by taking the necessary care, you can avoid the hassle. Like, if you stay in the regions Hauppauge, Smithtown, Northport, and Long Island, New York, you can hire JetAirCo Furnace Repair Services and keep away your family members from allergies. Besides, here we also provide some pocket-friendly tactics to keep allergies at bay.

Tips to Make Your Furnace Eco-Friendly

Remember that indoor allergy sufferers can live in peace with a furnace system. Just make a call to the JetAirCo Furnaces and Boilers system and thoroughly follow our guidelines. Besides, here for your help, we have highlighted some best tactics to prevent allergy symptoms.

1. Regularly Dust & Vacuum Your Home:

If pet dander, dust mites, and other loosen particles gather over the furnace unit, your forced air system can’t circulate air thoroughly. Keep in mind; it seems impossible to obliterate the dust particles unless you hire JetAirCo Gas Furnace Repair Services. However, you can gradually reduce the dust level by performing the following things :

  1. Daily launder your drapes. Remember that drapes are the common harboring spot for allergen particles. Hence, do it regularly.
  2. Vacuum the air vents so fresh air can enter your house.
  3. Vacuum behind and under furniture.

2. Clean the Air Duct Work:

Bear in mind; if the air ducts are clogged or dirty, they can circulate toxic air and cause an allergy attack. Therefore, if you notice your air duct gets clogged or dirty, give JetAirCo Heating Systems Services a call. Also, try to replace the air duct once after three months. It’s crucial, especially if you have pets and senior citizens at home.

 3. Add a Dehumidifier:

According to a 2019 survey, high indoor humidity levels can make allergy symptoms worse. Besides, higher indoor humidity levels can grow dust mites and moisture. In order to avoid this hassle, JetAirCo advises you to install a dehumidifier to your furnace, and the indoor air will remain much healthier. Apart from this, a dehumidifier can eliminate the excess moisture from the air and distribute fresh air inside your home.

Like JetAirCo Furnace Repair Services, a trustworthy contractor can quickly install a dehumidifier within your heating system. A dehumidifier will run in the background and even reduce your energy bills.

4. Install a HEPA Filter:

It’s another effective way to make your furnace system more eco-friendly to allergy sufferers. As per experts, if you install an air filter to your heating system, it might protect your system from mold buildup. Unfortunately, an air filter can’t remove pet danders and pollen. Hence, we suggest you install a HEPA filter.

High-Efficiency Particulate Air (HEPA) can significantly reduce pet danders, and other loose particles. However, installing a HEPA filter isn’t an easy task, and only experts can do it. Henceforth, we suggest you hire JetAirCo Heating Service and instantly add a HEPA filter to your furnace.

5. Keep Your Furnace Systems Well-Maintained:

One of the best and inexpensive ways to optimize your furnace system is to schedule an annual maintenance service. In case you can’t afford the above tactics, well-maintain your furnace system is the best way to ease allergy and asthma symptoms.

Bottom Lines

Why suffer from allergies when you can enjoy fresh indoor air? Call JetAirCo Furnace Repair Services today if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York. Hence, we would like you to contact us and keep your family members away from allergies and asthma.

Despite the way that we’re simply a month into the fall season, an ever-increasing number of mortgage holders are starting to set up their homes for winter to guarantee that they stay warm and agreeable all through the season. Regularly, they do this by supplanting their material frameworks or even their windows. Undoubtedly, these are good choices. However, do you know furnace maintenance tips can also keep your place comfortable?

Remember that experts suggest that you don’t just turn on your furnace in the winter months. This is because your heating system remains idle for a couple of months. Hence, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, contact JetAirCo Furnace Repair Services and after that activate your furnace system.

Things You Should Perform Before Turning on Your Furnace System:

In the undermentioned section, JetAirCo listed six crucial aspects you must consider before turning on your furnace during the winter months.

1. Check the Filters:

Before you activate your heating system, you must thoroughly check out the air filter. Keep in mind; you haven’t used your furnace for months. Hence, there’s a considerable possibility that dirt and lose particles might gather within your furnace. If you notice a dirty air filter, give JetAirCo Furnaces and Boilers Service a call and replace the clogged air filter before you use the furnace. A dirty air filter can reduce the indoor air quality as well as negatively affect your family member’s health, especially if you have children and senior citizens at home.

2. Be Sure that the Thermostat Works Correctly:

As per a 2018 survey, the thermostat can affect the furnace’s efficiency. Less efficiency means you might end up with higher energy bills. So, hire JetAirCo Gas Furnace Repair Services, and ensure that the thermostat works smoothly before using your furnace heating system. 

3. Search for Drafty Place:

Apart from checking the thermostat settings and air filter, you should search for drafty areas in your house. While doing this, you need to check your windows and doors. Keep in mind; if your windows and doors get damaged, air might escape from these places.  As a result, your furnace will take longer to make your place warm. Therefore, if you notice a draft in your house due to damaged doors and windows, instantly call JetAirCo Heating Systems Services and repair or replace them to prevent air from escaping.

4. Test Carbon Monoxide Detectors:

As per JetAirCo professional, it’s not just the thermostat you inspect before turning on your furnace; you should also see the carbon monoxide detectors to ensure that it still works properly. It’s an essential step as a damaged furnace can create toxic carbon monoxide gas into your house. Therefore, check your carbon monoxide detector thoroughly before turning on the furnace system in winter. However, if you don’t have sufficient time, hire JetAirCo Furnace Repair Services and resolve all your queries at the earliest time.

5. Remove Particles Placed Near the Furnace:

Before you activate your furnace for the winter months, ensure to take out items that are placed near your heating system. These particles often include furniture, old clothing, or any other loose particles. Hence, inspect every area surrounding your furnace and keep them away to a safe place. Besides, ensure that items don’t block the air vents and air ductwork as these might prevent air from circulating in your house.

6. Note Issues Experienced by your Furnace:

While inspecting your furnace heating system, it’s highly recommended to do an overall checking of the furnace unit. Also, when you perform this, take note of the common issues that your furnace system might experience. For example, you might hear unwanted sounds from your heating system, the furnace suddenly stops responding, and many others. If these problems arise, instantly call JetAirCo Heating Systems Maintenance Services to ensure your furnace’s peak performance.

Conclusion

So, if you search for someone who can assist you in maintaining and repairing your furnace at a pocket-friendly price, give JetAirCo  Furnace Repair Services a chance to become your service partner. Our humble request is to contact us if you stay in the areas of Hauppauge, Smithtown, Northport, and Long Island, New York.

The heating system is an essential consideration during the winter season, even in areas where the temperature falls below freezing. However, heating system expenses might make a huge negative impact on your overall budget. Hence, it’s essential to choose the most efficient heating system for your home’s needs. So, whether you want to buy a new system or increase its heating efficiency, thoroughly read this guide provided by JetAirCo.

The JetAirCo Heating Installation & Repair team knows a lot about heating system-related queries. We offer our services in Hauppauge, Smithtown, Northport, and Long Island, New York. 

Choose the Most Efficient Heating System for your Purpose

In the rest of the blog, we have covered the best efficient heating system you can rely upon in 2021. However, you can anytime free to hire JetAirCo Heating Service for assistance.

1.   Heat Pumps

It’s a widely used heating system. A heat pump system conveys heat from one area to another, absorbs cold air, and circulates cold air during the winter months. However, during the cold season, it reserves its procedure and behaves like an AC. It means absorbing hot air from your home and distributing fresh cold air to every corner of your house. However, depending on the environment, the heat pump system might vary. For example, if you install a high efficient heat pump system in your place, it will consume lower energy and reduce the monthly electricity bills. Besides, these heating systems are safe to operate and don’t generate any harmful gas-for instance, carbon monoxide. However, if you face any challenges while running your heat pump system, give JetAirCo Heat Pump Repair Service a chance.

2.  Furnace

A furnace is the second popular heating system in New York. As per the 2019 survey, more than 60% of Americans install furnace heating systems into their homes and call JetAirCo Furnace Repair Services when required.

The Widely Used furnace heating systems are :

  1. Oil:  A oil furnace burns fuel oil to generate heat. If you want to install an oil furnace heating system, contact a supplier who can regularly supply fuel. However, you need to all-time monitor your oil furnace system to ensure the oil doesn’t run out when it requires most. Unfortunately, an oil furnace system might lead to several problems. If this situation occurs, you can hire JetAirCo Oil Furnace & Boiler service.
  2. Gas: In the gas furnace system, a local supplier will supply gas via a supply pipe installed in your house. Studies show that a gas furnace system might consume less energy than a heat pump system. Also, to maintain and repair your gas furnace system, you can reach JetAirCo Gas Furnace Repair Services anytime.

3. Boilers

Keep in mind that the boiler heating system is less common in houses than the heat pump and furnace system. However, a boiler can still serve your place in many ways. A boiler system produces hot water and then distributes it via radiators and pipes inside your house. AFUE marked the boiler heating system as the most efficient heating system. Besides for extracting heat from the exhaust gases, the boiler system uses a second heat exchanger. Unfortunately, if your boiler system suddenly stops responding, you can instantly get in touch with JetAirCo Boiler repair service.

Conclusion

Picking up the most efficient heating system isn’t an easy task. Also, to operate it at the highest performance, it’s essential to maintain and repair your heating system timely. JetAirCo Heating System Maintenance Repair Services offer high-quality heating system services near the Hauppauge, Smithtown, Northport, and Long Island, New York. Therefore, seek our assistance to choose the best heating system for your needs and fix the possible issues quickly.

During the winter season, a gas furnace heating system warms your home like this: First, utilized natural gas or propane in the burner. The flames heat a metal warmth exchanger and exhaust out of the vent. The heater’s blower powers the warmed air into the ventilation work and conveys it through the home.

However, issues with a gas furnace are very common, and if you are a homeowner, you might know that you might have to repair or replace your home appliances after a specific time. A gas furnace system is also included in that list. Fortunately, if you live in the regions of Hauppauge, Smithtown, Northport, and Long Island, New York, JetAirCo Gas Furnace Repair Services will be there for your help.

Advantages of Gas Furnace Maintenance

 In a recent survey,  the U.S. Environmental Protection Agency mentions that if you well-maintain your gas furnace system, it can save up to 30% of energy bills. However, certain things only need expert assistance; in such a circumstance, you can end your search with JetAirCo Furnace Repair Services.

Let’s come back to the topic and focus on the benefits you will get if you well-maintain your gas furnace heating system.

1.   Cut Down the Utility Bills

If you well-maintain your gas furnace, your system will run to its highest efficiency during the cold months. When you perform the maintenance task with JetAirCo, our technicians will lubricate the moving parts, tighten the electrical connections, and measure the airflow correctly.  Besides, if you inspect your gas furnace system daily, you will check & adjust the blower components and gas pressure. In addition, furnace tune-up will ensure that every element of your system will work at its highest capacity, raising its efficiency during the operation. As a result, you might end up with lower utility bills.

2.   Fewer Repairs

A frequent check-up allows the technician to thoroughly check & identify minor issues before turning them into major problems. If you hire JetAirCo Gas Furnace Repair Services, our lubrication, assessment, and cleaning procedure will ensure that your system will experience fewer repairing or breakdown problems. You will also get your desire temperature during the cold months.

3.   Increase your Furnace LifeCycle

During seasonal maintenance, a wide range of testing & inspection involves. It ensures that the professionals will detect and fix minor problems that add years to the lifecycle of your gas furnace system. Regularly clean the condenser unit, testing the furnace unit’s starting capabilities will keep your system away from wear & tear. It will help you to use the heating system for the longest time.

4.   Improved Capacity

 Another important thing for which you should regularly perform a check-up. Bear in mind when you inspect and fixed minor issues of all the crucial parts, you will improve the overall capacity of your heating system. It means your heating system will take less time to distribute hot air throughout your residence.

5.   Increase Safety

We believe you never want to compromise with the safety of your heating system. Do you know with regular furnace maintenance, you can provide an extra layer of security to your home? Yes, it’s true. Gas furnace heating system comes with a review of safety features & possible problem areas. Like, you need to clean and adjust the burner parts daily. Else, accidents can occur at any time. Fortunately, with  JetAirCo Furnace Repair Services, you can avoid this hassle.

Only at JetAirCo

 When you seek assistance from JetAirCo Gas Furnace Repair Services, you will always get something more. At JetAirCo, we can offer you everything that you need to run your gas furnace system. From furnace tune-up to installation, contact JetAirCo Furnaces and Boilers service today if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York.

By utilizing a heating system, we can adjust our desired temperature. It’s too cold outside; however, you don’t need to worry as your heating system can warm your place. So you want a heating system for your home, but don’t have any idea about it? If so, things might go against you. As many heating systems are available in the market and choose the right one will not be any task.

Besides, if you have a too old heating system and want a new one, it’s crucial to pick up a suitable heating system for you. Fortunately, if you live near Hauppauge, Smithtown, Northport, and Long Island, New York, you can contact JetAirCo Heating System Service.

Types of Heating System you use in 2021

 In this guide, JetAirCo will discuss the top 5 on-demand heating systems. So that, when you go to the market to buy a new heating system, you can go with full confidence. You can also opt for JetAirCo Heating Installation & Repair service and give your task on our shoulders.

1. Furnace:

A furnace, also known as Forced Air Distribution System, will circulate heated air throughout your house. The furnace heating system can make your place warm with oil, propane, or electricity. However, most homeowners use natural gas.

The gas furnace is the widely used Forced Air Distribution System as it produces hot air frequently compared to other furnace types. In case you want to install, maintain, or repair your furnace, just contact JetAirCo Gas Furnace Repair Services.

2. Boiler:

Another widely used heating system you can use and commonly known as Radiator Distribution Systems. In order to provide hot air, the boiler sends stream or hot air via pipes. However, the installation process will be difficult and expensive. In this situation, hire JetAirCo Boiler Installation service and allow us to complete your task. Keep in mind that boilers & furnaces are commonly considered central heating systems as they generate heat in the house’s central area and circulate hot air throughout your residence.

3. Heat Pump:

 Unlike other heating systems, a heat pump can generate both cold and hot air. This type of heating system transfers heat through refrigerant & electricity. It makes a heat pump more effective than other standard heating systems. To install a heat pump, take assistance from the JetAirCo Heat Pump Service.

4. Hybrid Heating System:

It combines the gas furnace power with the heat pump’s energy efficiency. Like the heat pump,  the hybrid heating system can also generate hot & cold air. Besides, as it’s a combination of a heat pump or gas furnace, it means you will significantly reduce the requirement of repair & replacement cost.

5. Radiant Heating:

Another functional heating system you can buy. Bear in mind a radiant heating system sends electric heat or hot water through the tubes located on the floor. Sometimes, these pipes can be located in the walls or ceilings. Radiant heating uses electricity, oil, propane, or gas to generate heat.

A radiant heating system can run smoothly for the longest time; however, it is difficult to repair when issues arise. Also, depending on the heat source system, the radiant heating system’s life cycle varies.

Conclusion

Once you have purchased the right heating system for yourself, now it’s time to install it. Get in touch with the JetAirCo Heating System Service and perform the task most effectively. Besides, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, and want to maintain and repair your heating system, you can end your search with JetAirCo Heating Maintenance Repair Service.

Whether you use a boiler or furnace heating system, you will experience several issues with your system after a certain period. When this happens, the first thing that might come to your mind is to call an oil Furnace & Boiler Repair service provider like JetAirCo. As one of the leading Furnaces and Boilers system providers in the regions of Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA, JetAirCo’s professionals are always available to handle Oil Burner Service quickly, Boiler repair service, Furnace Repair Services, and Boiler Installation issues. Therefore, you can rely upon us at any time of the day.

But do you know? There are specific tasks that you can perform on your own. Here, for your help, JetAirCo’s professionals come with some pocket-friendly steps that you can attempt to prevent the costly repair cost.

Step 1:- Completely Shut Down your System

Before you move further, first ensure that your heating system is turned off completely. Hence, switch off the fuel/boiler electrical power and fuel supply. This way, you can protect yourself and perform any heating system maintenance and repair.

As per JetAirCo Gas Furnace Repair Services, you will see the electrical power switch at the top of the cellar stairs or the bottom. Locating it will be easy as the electrical power switch comes with bright red color light.

Step 2:- Take Out Loosen Particles & Carbon Soot

After successfully turning off the heating system, you should take out loose particles and debris from the heating system’s combustion chamber. Remember that the procedure might take some time; however, you need to repeat the step until you completely remove carbon dioxide, water vapor, carbon soot, and other debris from the combustion chamber.

Cleaning the heating system combustion chamber will stop debris build-up on the chamber wall or any other area.

Step 3:- Inspect the Flue Pipe

To make sure your heating system’s combustion products exit from your place correctly, give special attention to the flue pipes. Besides, with It, you will quickly determine any leaks, holes, or cracks.

Hence, thoroughly inspect the flue pipe. Precisely where the lines meet the heating system. In case you experience a small leak or hole, you can wrap it with foil tape for a temporary solution. However, large leaks or holes require professional experts such as JetAirCo Heating System Repair Services.

Step 4:- Change the Oil Filter

Have you remembered when you last replace the oil filter of your heating system? No? Then instantly purchase a new oil filter and replace it with the existing one. Remember that replacing the oil filter ensures that your system will operate at its peak efficiency and prevent short pollutants from clogging the oil-burner nozzle.

Step 5:- Change the Air Filter

Once you have successfully replaced the oil filter, it’s time to consider the air filter. However, before you change the air filter, be sure you brought the perfect air filter for your heating system. Keep in mind; every air filter is unique; hence it’s crucial to choose the right one that will adequately fit your heating system. We advise you to change the air filter; it’s always better to hire a professional expert and let them perform the task on your behalf.

Step 6:- Test the Burner Efficiency

By testing the burner efficiency, you will understand the boiler’s soot level and boiler’s draft pressure.

In order to measure the boiler efficiency, simply put a probe within the exhaust flue to extract the gas sample. Then, with a thermocouple, you can easily calculate the boiler efficiency.

 Conclusion

We have full faith that you can perform the Heating Installation & Repair on your own. However, where is the harm to hire the Best Heating Repair Services for your purpose? Besides, the heating system operates at a high temperature. Hence, if, without taking necessary precautions, you want to do this on your own, you might put yourself at big risk. Henceforth, opt for the assistance of JetAirCo Furnace & Boiler Installation, Maintenance, and Repair service center. Grab our help if you stay near Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA

A furnace is the most vital element of the HVAC system. When you set the thermostat, the furnace will activate to produce heat air. A blowing fan then distributes the warm air throughout your house. However, heat transfer totally depends on the furnace type.

Now, there are several types of furnaces available on the market and how you can pick up the one that will fulfill your requirements.?

Here, the professional of jetAirCo’s Furnace Repair Services comes to your rescue. In this short passage, we will explain some of the best-recommended furnace types and their functions.

Types of Furnaces:

Bear in mind, furnaces come in different sizes, and users mainly pick up a furnace accoding to their home size.  Keep an eye on the remaining guide as here we have explained some top-notches furnace types and the way they work.

1. Single Stage Furnace:

This furnace type consists of a solo gas valve that allows gas to progress at the highest rate. Besides, if you use a single-stage furnace, you will get total control over the gas flow. This type of furnace is particularly designed to maintain fluency; however, you might often hear unwanted sounds from the single-stage furnace.

This single-stage furnace work at 80 percent of fuel efficiency will perfectly fit small and mild areas. Keep in mind; less technology involves installing this type of furnace, and you don’t need to spend much money to complete the setup process. Also, as minimal furnace repair require, you can use this type of furnace for the longest time.

2. Modulating Furnace:

A modulating furnace is a kind of furnace that permits the user to change how much warmth is delivered at some random time. This implies it generally works at ideal warming. Despite the fact that models change, most are intended to run utilizing 1% increments or diminishes to permit the heater to screen how much warmth is required. A modulating furnace guardedly adjusts the yield by holding the temperature of your house.

A modulating furnace is efficient and gives steady temperatures throughout your home. Do you stay in a place where winters tend to last for a long period of time? Then a modulating furnace will be the best choice for you.

 

3. Electric Furnace:

Don’t want to use a gas furnace? Then buy an electric furnace.  To use a gas furnace, you have to install gas pipelines first. However, some homeowners don’t prefer to set up gas pipes and opt for electric furnaces.

Besides, if you have a tight budget, then utilizing an electric furnace will be ideal. Also, you don’t have to think about toxic fumes and carbon monoxide with an electric furnace, and can install it on your own.

4. Two-Stage Furnaces:

The two-stage furnace gives you more control over the gas flow compared to the single-stage furnace. In order to adjust the heating load power demand, the two-stage furnace can communicate with the thermostat.

During the cold seasons, the furnace’s thermostat will automatically open the gas valves and help the furnace use its full power.  A two-stage furnace also comes with an extended heating cycle, which means absorbing the hot air and replacing it with cold air, making your residence comfortable for summer.

5. Natural Gas Furnace:

This is another prominent furnace you can opt for. One of the unique benefits of utilizing natural gas furnaces is that they don’t breakdown easily and save thousands of repair costs.

Natural furnaces utilize the most limited amount of fuels means using a natural gas furnace in your residence decreases the monthly bills.  The natural furnace is the cleanest. Hence you don’t need to think about pollution.

6. Oil Furnace:

If you decide to use an oil furnace, at first, make sure that you have enough space to store oil. Besides, make contact with a company who will regularly deliver you oil.

This type of furnace releases lots of heat; however, you can easily distribute them into your house. Unfortunately, the dust and soot buildup makes these furnaces high expensive to operate. Besides, if you haven’t changed the air filter regularly as well as cleaned the chimney regularly, you might put yourself and your family members at the risk of fire.

For Further Assistance, Contact JetAirCo

hese are some of the on-demand furnaces that you can install in your home. To complete the installation task, it’s highly recommended to hire professional experts such as JetAirCo. At JetAirCo, we are assembled with a team of experienced technicians who have the ability to install your furnace with no downtime. Therefore, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, just make us a call, and JetAirCo’s Furnace Installation and Repair Services will be present at your service.

Your HVAC systems make your living comfortable and beautiful. But, when you have invested in the wrong system, it will make your experience disappointed. You may not get the right temperature, and your expenses go higher and higher every month. If you are not happy with your system, you can consult with an HVAC professional near you. They will guide you buy the right heating system for your work. JetAirCo can help you find the right answer for your heating system. We have been in the service for many years, and we offer HVAC service in Northport, Hauppauge, Smithtown, and more.

When you install the correct size, it benefits you in many ways. You will get proper functions and can cut down the energy cost also. When it comes to the comfort level, your product will offer you the best support.

Noise is another factor that your HVAC system makes. But, when you have the right size system, you can reduce the noise level also. The only way to know the right heating system for your house is by hiring an experienced heating system service provider. You can contact any name near you and have them by your side when planning for your system. We suggest you go for the experienced name because it needs the knowledge to analyze the heating system and installation.

Professionals do the measure in the square footage. Besides, other things are also important to know your system’s right size, and they are windows, insulation, and age of the home. Do not buy a too large system for your heating. It does not benefit you.

When you invest in the oversized furnace, it goes on and off frequently. This short cycle causes hot and cold spaces in your home. Besides, it causes too much noise which disturbs your peace.

Check the AFUE rating when buying a heating system. AFUE is Annual Fuel Utilization Efficiency. It measures the efficiency of your furnace. The minimum rating is 80%. But, you can opt for the higher efficiency rating also. The high-efficiency rating is between 90%-98%. Its upfront charges are higher, but you can save money in the long run.

Let a professional decide which option is the best for you. JetAirCo has always been there to meet your demands. You can contact us anytime to fix the HVAC issues. If you want the best heating system for your home, we are ready to serve your demands.

Knowing your furnace always helps you take care of your system in a better way. Not all furnaces work the same. This is why you need to check the AFUE (Annual Fuel Utilization Efficiency) of your system. The higher the efficiency, the better your system works. If you need any help for maintaining your heating system, JetAirCo offers you the most satisfying service that quickly solves your heating system problems. We have an experienced team for your system maintenance. Since we have been in the fields for many years, we have earned the knowledge of handling different technologies. You will get the best heating system maintenance service in Smithtown, Long Island, Northport, and other areas.

Nearly every furnace has similar features, and the numbers go high or down as per the price. If you use a gas furnace, we have mentioned your furnace’s key factors and how they work. This detail will help you know more about your furnace.

Variable speed blowers:

Variable speed defines the furnace’s fan motor, which has a different speed to control the furnace’s heat.

Blower motor:

The blower motor helps the warm air passes through the ducts. It takes care of the cycling air process.

Air filtration:

With air filtration, you can improve the air quality coming from your furnace. An electrostatic filter is attached to your system to trap particles.

Heat exchanger:

In a heat exchanger, the air gets heated.

Venting:

Venting is a significant part of your furnace. It has pipes from the furnace to the outside, allowing the gases to go out of your house.

Zoned heating:

This heating system creates different zones or areas in your house for the heating. You can control these zones separately by using a thermostat. If you have a large home, the zone heating proves to very effective for you.

Your HVAC system enhances your comfort inside your house. So, they have a role to play in your happy life. If you experience any problem with your system, call JetAirCo. Issues in your HVAC systems can put your life in danger.

JetAirCo offers heating maintenance service in Smithtown, Northport, and in other areas of New York. Consult with our experienced professionals about your heating and cooling system.

Sometimes, your system just wants a replacement. You cannot detect the need because you are not aware of the problems your system may go through. An aging system is better to be replaced than repaired. There are some signs that your system gives before its complete breakdown. If your system needs frequent repairs, you can search for new systems.

If the energy bills are increasing every month, it denotes a problem with your heating system. You can have us checked the system to find out problems. Call JetAirCo for more details. We are always ready to serve your demands.

If your heating system stops suddenly on the coldest day, it puts you worried. This situation is no less fearful than a nightmare. If you want your heating system to work seamlessly in the winter season, invest your time in its maintenance. JetAirCo is a renowned heating system installation and repair service provider in Hauppauge, Smithtown, North Port, and in other areas of New York. You can call us for the maintenance of your heating system.

If you don’t want to experience a sudden breakdown of your system, pay attention to your heating system’s maintenance. Ensure that every part of your system runs perfectly for your comfort. Here are some tips that you can follow for your heating system.

Schedule your maintenance annually:

Like every machine, your heating system also needs maintenance. Our experienced heating system professionals will visit your place and check your systems thoroughly. We check every technical part inside and outside of your system. We aim at making your system efficient enough that it works perfectly in the peak demands. We are offering the best heating repair services in Hauppauge, Smithtown, Northport, and more.

Check smoke alarms and carbon monoxide detectors:

You ignore these two things always. But, they are an important part of your heating systems. For your safety, you need to check your smoke alarms and carbon monoxide detectors. Check the batteries and ensure that they are working perfectly.

Change the air filters:

Air filter maintenance helps you improve the air quality inside your house. A clogged filter can damage your heating system because it overheats your heating system. Besides, it distributes poor air inside your house, keeping your health at risk. So, check your filters and clean or replace them as per your needs.

Check your thermostats:

Your thermostat regulates the temperature. If it is not working well, you will not get the desired heat for your comfort. Turn on heating mode and increase the temperature on your thermostat to ensure that it is working well. Sometimes, expired batteries are the reason for your heating system failure. If you want to enhance your heating system’s efficiency, you can install a programmable or smart thermostat that helps your heating system produce heat according to your needs.

Hire an experienced professional:

Your heating system always needs an experienced professional to maintain it. Check the services your provider offers and research about your company. JetAirCo is an experienced name for your heating system maintenance in Smithtown, Northport, Hauppauge, and in more areas of New York. Contact us to know more about our services. Our branch is located in Long Island, New York.

You need a proper function from your furnace in the winter when the outside temperature is freezing. But, if you think your furnace is always ready to meet the peak demands, you are wrong. If it is not maintained, your furnace works hard to raise the temperature, increasing your energy consumption bills. JetAirCo shares tips with you to make your furnace ready for the winter. We offer heating system services in Smithtown, North Port, Hauppauge, Long Island, and in other areas of New York.

Your furnace will work without any faults when you pay attention to the maintenance. While an annual servicing of your furnace improves the system’s performance, you can check a few things on your own to make the system work finely.

Turn on your thermostat:

Set your thermostat in the heating mode and raise the temperature higher than your room temperature. If your system does not turn on, check your thermostat’s inside by opening up the cover. If everything is perfect there, check the power source of your heating system. If you still do not find anything wrong there, call a professional. Do not check the technical things of your furnace as it can be dangerous.  We offer Heating Systems Services in Smithtown and other areas of New York. Give us a call to know more about our services.

Clean your air filters:

Air filters are an important part of your furnace. Since it filters the air, it can be clogged by dust and dirt. Cleaning your filter improves the functions of your furnace. Replace your furnace every few months. If you use a permanent electrostatic filter, you clean the filter and use it.

Cover the AC Condenser:

If your heating system is not a heat pump, cover up your AC condenser to avoid icicle build up in the system. Do not use a moisture-trapping plastic trap to wrap it up.

Clean the system’s heat exchanger:

You cannot perform this task because it needs technical knowledge. Hire an HVAC service provider near you to clean your heat exchanger. JetAirCo is a renowned name for maintaining HVAC systems in New York. We have a team of experienced professionals who visit your place and check your systems. They will quickly fix the issues to restore your comfort inside your house. Don’t spend a day without your furnace in the winter. Call us soon.

Lubricate and clean the blower motor:

Read your manufacturer’s manual, and if it permits you for the lubrication, you can do this. Turn off the power and clean and open the caps of bearings. Lubricate the bearings to get a smooth function.

Check your igniter switch:

If you have an old furnace, you may need to relight the pilot. The modern systems have electronic ignitors. If the ignitor is not working, press the reset button of your system. If it is still not working, call JetAirCo. We will reach your place and will offer you the best service.

Check your carbon monoxide detectors:

Your furnace produces carbon monoxide gas that throws away from your house through the ventilation.  A carbon monoxide detector detects the presence of the gas and alerts you. This is a dangerous gas for your health. So, make sure that your carbon monoxide detector always performs perfectly. If you want to know more about our services, give us a call. We are a popular HVAC service provider in New York. Connect with us for more details.

You are inside your house in a cozy environment, but that does not mean you are safe from contaminants. Many factors pollute your home environment, and your furnace is one of the prime factors that can make the inside air poor. We recommend you hire an experienced Heating System Maintenance service provider and check your living environment. JetAirCo brings you some common situations where your furnace contaminates the air.

When you do not maintain your furnace properly, it causes so many issues connected to your health and wellness. In the winter, you may keep your home sealed perfectly for not allowing the outside air to let in. if you have a faulty furnace, this turns the situation worse for you. In a closed environment, the pollutants in the air cannot flow outside.

Hire an expert and maintain your furnace properly. JetAirCo is offering Heating Repairs in Hauppauge, Smithtown, North Port, and other areas of New York. Contact us and get the best service. The company has a trusted customer network, and our loyal clients spread our names. We are happy to serve people. If you have any problem with your heating system, you can contact us. Our experts will reach your place immediately and try to solve your problems without taking much time.

If you want your furnace to work perfectly, taking care of your furnace’s ventilation is a must thing for you. A well-ventilated furnace will always meet your requirement by offering the right temperature for your environment.

Your furnace produces carbon, which goes outside through the un-clogged ventilation. If it gets blocked, the amount of carbon monoxide in the air will also increase, making your environment dangerous to your health.

We recommend a carbon monoxide monitor that detects the presence of carbon in the air. It alerts you. Pay attention to the maintenance of your furnace. You can do some easy checks without in-depth technical knowledge. But, your furnace needs proper maintenance at least twice a year. JetAirCo can help you get the right maintenance service within your budget. We are offering Heating Maintenance in Northport, Hauppauge, Smithtown, and other areas of New York.

We request you to check a few things before our expert team visits your place. Sometimes, there are minor issues like dead thermostat batteries or wrong heating mode, which you can handle perfectly.

Here, we mention a few things that you can check before we arrive at your place.

  1. Make sure that thermostat is in the heating position.
  2. Check the programming setting of your thermostat.
  3. Replace the batteries of your thermostat.
  4. Check there is a proper electricity flow to your thermostat.
  5. Check the furnace switch.
  6. Examine your furnace’s vents

If you find that the issue is somewhere else, call JetAirCo. We will reach your place and offer the best services for your heating system. A faulty heating system is dangerous to your health. Leave the technical parts to us. We offer heating services in Hauppauge, Smithtown, Northport, and other parts of New York. Call us and fix the appointment.

Everyone wants to have the most efficient home heating system for the house. It not only cuts down your energy cost but also keeps your environment safe, especially from the carbon footprint. If you want to buy the best heating system for your house, call a professional for advice. Remember that taking help from an HVAC professional service provider will always benefit you. Installing your heating system needs expert knowledge. So, hire a company that can help you find the best heating system for you.

JetAirCo is an HVAC service provider that fixes your problem quickly and enhances your home comfort in the best way. The company has a wide presence in areas like Hauppauge, Smithtown, Northport, and in more areas of New York

Choosing the right heating system is a necessary thing for your house. An HVAC expert can give you the right decision when it comes to the home heating system. There are various factors that determine which type of heating system you need.

As a buyer, you can gather knowledge about the efficiency rating of your heating system. AFUE (Annual Fuel Utilization Efficiency) is the measure that determines the amount of energy that is used by the heating system.

If you use a heat pump, HSPF instead of AFUE measures the efficiency of the heating system. SEER ratings are for measuring the efficiency of the heat pump in the cooling mode.

JetAirCo can help you get the best heating system for your home. We have a branch in Long Island, New York. But, our active areas are vast, including Hauppauge, Smithtown, North Port, and more. Our experienced heating system provider will visit your place and analyze your requirement to determine the best system for your space.

Picking the right type of heating system mostly depends on where you live. The climate is an essential factor for your heating system. We also consider your house built to choose the best system for you.

Heat pumps and furnaces are the two primary types of heating systems for residential use. We describe these systems to offer you a better idea of energy efficiency.

Heat pumps:

Heat pumps move the air using different methods to keep your house warm or cold, depending on your needs.  Air-source heat pumps bring down the temperature with the help of refrigerant. When you use the system in the heating mode, it extracts heat from the outside air. This type of heating system will work efficiently if you have moderate weather. But in freezing climates, this heating system does not work efficiently.

A geothermal heat pump uses the soil or water source to capture or release the heat. It is more efficient than the air-source heat pump. It reduces energy consumption and saves energy costs. But, it requires a higher installation charge.

Furnaces:

Furnaces are a common type of heating system. You can use gas, oil, or electricity to run your furnace. Gas furnaces are the cheapest ones, but they are not as efficient as air-source energy or electric furnaces. Check the AFUE rating and pick the higher one for better efficiency. JetAirCo will make your task easier by offering the best system for your house. We check your requirement and come up with the best system. If you need heating system services in Hauppauge, Smithtown, North Port, you can contact us. We will reach your place as soon as you contact us.

Changing air filters does not cost you high, but ignoring this can lead you to big and expensive furnace repair in the future. So, routinely check your air filter and do the necessary steps to keep it clean. When it gets clogged, you can opt for replacing the filter with the new one. An air filter is an important part of your furnace. It has a direct connection with the quality of the air inside your house. So, to keep your health happy, check the air filter of your furnace. You can call a professional to get the best advice on it. JetAirCo is a trusted name when it comes to HVAC system maintenance. It has a team of professionals who visit your place and solve all problems with your system. Visit Long Island, New York, to communicate with us.

We are active in areas like Hauppauge, Smithtown, North Port, and other New York places. When your air filter is working properly, your system remains perfect without any chance of dirt build-up inside the system. Our experts recommend changing the filter once in three months. Here are some of the facts that you might ignore when considering the value of your air filter.

The heating and cooling efficiency:

The performance of your heating system will go high when you have a cleaned air filter. For the efficiency of your furnace, concentrate on the filter quality. When the particles start building up in your furnace, it needs a costly repair. 

If you need any consultation for your HVAC system, JetAirCo is always ready to offer a quick solution. Do not compromise with your comfort since we are always available for your service.

Avoid unnecessary repair cost:

a clean air filter also saves your money. A dirty filter disturbs a proper airflow in the system, causing overheating and sudden shutdown like issues. You can avoid expensive repairs with a clean air filter.

Improve air quality:

The quality of the air will enhance when you invest time and money in the air filter. The filter keeps the dust and dirt away from you, offering a healthier environment to live in.

The benefits of changing air filters are many when you think about your health. If you are confused about which filter to buy, JetAirCo extends its helping hands to you. The customer support team is always available for your queries. You can also directly contact us by visiting our branch. We are located in Long Island, New York. For any HVAC system related problems, we will be happy to help you.  

A furnace in the winter season gives you real relief from the chilling weather. The performance of your furnace depends on the maintenance. If you follow the experts, they recommend bi-annual maintenance for your HVAC maintenance. If you have already followed all the guidelines and still find problems in your furnace, we are providing you with some easy tips so that you can check your furnace and fix the problems without anyone’s help. If you do not have the technical knowledge, let an expert handle it.

JetAirCo is offering the best HVAC maintenance service in Smithtown, Northport, Hauppauge, and in other areas of New York. If you need quick help with your HVAC systems, contact us and stay relaxed. We will offer the right solution for you. 

For your furnace troubleshooting tips, we tried to cover as many details as possible below:

1.A thermostat is set properly:

Sometimes, the main problem is in the thermostat itself. So, before calling a professional, check your thermostat and ensure that it is set in the ‘heat’ mode. The temperature may be accidentally turned down a few degrees. Set the temperature as per your comfort. If the set temperature does not provide you the needed comfort, turn the temperature high. 

2. Change the thermostat batteries:

If your thermostat runs on batteries, you need to check whether the batteries go dead or not. Most of the time house owners do not check it and they call a professional to fix furnace problems.

3. Check circuit breaker:

Sometimes, your furnace stops working because you may have blown a fuse. Check the fuse box and find out the problems to fix. 

4. Fuel source:

When you are handling your furnace, you must maintain the safety issue. Sometimes, the fuel source gets turned off by accident. If you smell gas, contact JetAirCo immediately because only professionals can handle the issue rightly. 

These are the things that you can do by yourself. But, some problems need only experts and you must call a reliable name for your HVAC that can fix the issue properly. Choose the experienced HVAC company near you. We are offering the best HVAC maintenance in Smithtown, Northport, and Hauppauge. 

When you need to call JetAirCo:

  1. If your furnace causes clanging, banging, and other noises, you must call a professional service for your HVAC systems.
  2. If there is any gas line issue, it should be handled by an expert.
  3. If your furnace has a faulty pipe light or furnace flame, this situation also needs a professional.

Call JetAirCo and let them handle your furnace issue if the problem is too technical. We have a branch in Long Island, New York. 

The furnace filter is one of the important parts of a furnace and it also improves the air quality. You cannot overlook the maintenance of the filter because it can cause so many health issues. Since experts always recommend change furnace filter, many people are asking questions about how they can reuse the furnace filter without lowering the air quality. You can contact JetAirCo to know the right way for the maintenance of your heating service. You will get the heating installation service in Long Island, Hauppauge, Smithtown, and in more areas.

A dirty filter causes a dangerous atmosphere:

When your filter is dirty, it does not filter the pollutants from the air. Even a little bit dirty also interrupts the airflow and your heating system also works hard to keep the space warm. So, it will increase your energy-consuming costs because of the reduced airflow.

The real problem is also associated with a filter that is clogged. In that case, no air can pass through it. The heated air overheats the heat exchanger and your furnace will stop performing.

Types of furnace filter:

If you are worried about the cleaning of the filter, you can seek help from professionals. JetAirCo will offer heating system repair and maintenance service. The company has a wide presence in Hauppauge, Smithtown, Northport, and in other areas.

Before you pick the maintenance, you have to be aware of the type of system you have. There are two types of filters used in the furnace – disposable and permanent filters. If your furnace runs with the disposable filter, you need to change it in every 2 to 3 months. It depends on the size and type of filter.

If you are using a permanent filter, you can reuse your filter after a proper cleaning. You can follow some easy tips to clean your filter. You need to check the part and clean it. You need to ensure that the filter should not be too dirty.

Cleaning the permanent filer does not take too much time, anyone can do this. Just remover the filter from the furnace and rinse it to clean the dust. Dry it completely and insert it the furnace again.

How to improve air quality:

If you are concerned about the indoor air quality, you can choose the filter with the MERV rating. The higher the rating, the finer the filtration will be. The rating decides the size of the particles the filter is capable of filtering.

So, this can help you a lot. If you want more detailed information, you can call JetAirCo. The company is offering heating services for your systems in Hauppauge, Smithtown, Northport, and in more areas. 

If you are worried about your furnace fan that is constantly running, there is nothing to be worried. Heating professionals believe that a continuous running of the furnace fan will benefit your heating. If you experience any odd things with your furnace, you can contact JetAirCo. The company is offering Heating Installation & Repair in Long Island, Northport, Smithtown, and in other places. Those who are using the furnace for heating, have the same questions to ask. Our heating experts will clear your doubts by sharing their experience.

When you keep the fan running always, you will get the better circulation of the heated air. Since the heat rises high, the upper portion seems hot and the lower area of your house remains comparably colder. To solve the issue, you must keep your furnace fan running always. It also helps the air circulate in every corner of the house.

It also benefits those who have problems with asthma, allergies, and respiratory problems. You can install an air filter to keep the quality of the air high. When you continually run the fan, it also improves the quality of the air.

JetAirCo is a trusted name for your HVAC system service. If you want heating repairs in Northport and other places, you can visit us to know more about our services. For immediate help, hire us and we take minimum time to reach your place.

When we are talking about the benefits of continuously running furnace fan, we must talk about some drawback also. It increases your electricity bill a bit. But, if you have a high efficient motor attached to it, you will experience no difference.

Many people even think that this continuous running of the furnace fan can cause a breakdown. But, you should know that manufacturers designed the fan for performing the function. It can bear the load and it does not cause any problems also.

Along with this, you have to keep in mind a few factors regarding your furnace fan. If your ductwork is located in the attic, you must not keep the fan running always. If you have leaky ductwork, you must keep your fan off when it is not needed.

The fan is continuously running because of the system of your thermostat. In most thermostat, there are two modes – auto and on. When you choose the auto mode, it turns on the fan as per the requirement. When it is on, the fan will always be running. It can also be caused by a faulty fan limit switch. If you experience a technical problem with your HVAC systems, you must call a professional for solving the issue.

JetAirCo is always there for you. It is offering Heating Installation & Repair in Long Island, Northport, Smithtown, and other parts in New York.

If you are using a gas furnace, you may be told to take extra precautions since gas furnaces create more unsafe situations compared to the other types. Sometimes, the concerns are exaggerated. Using gas for domestic and industrial purpose is very common. If your house has a natural gas line, you can do many things with it. You can also heat your furnace. If you are worried about the safety issue for your furnace, you must consult with a professional heating service. JetAirCo is a professional name that helps you repair your heating systems properly. We are offering HVAC maintenance and repair service in Smithtown, Northport, and Long Island. If you have any query regarding your heating system, we can solve your every problem.

 If you are thinking that gas furnace is unsafe to use. Time has come to check reality.

Here, we try to clear your doubts by presenting to you the facts of using a gas furnace.

Gas furnaces have safety measures:

These days, manufacturers introduce advanced safety measures to the gas furnaces to offer you a protected environment. You can get many built-in measures for your safety. So, thinking about the danger from your gas furnaces is wrong.

Carbon Monoxide Detector for Early Warnings:

Gas furnaces need a carbon monoxide detector to offer you a safe environment for your health. Carbon Monoxide (CO) is an odourless, colourless, and tasteless gas. This is why you need a detector that makes you alert about the amount of gas. These detectors are placed in different rooms and keep your living safe. These days, smoke alarm systems also come up with the CO detectors.

Routine maintenance:

Routine maintenance is required for your every HVAC appliance. Such maintenance should be carried out by experts because they are well-aware of the technical parts and they also take extra measures where the chances of faults are high. If you are using a gas furnace, a professional heating service provider pays attention to the heat exchanger and the gas lines. These are the most vulnerable areas when it comes to cracking and leakage. Hire JetAirCo for your heating system repair service. We are active in areas like Smithtown, Northport, and Long Island. Consult with our experts and come up with the right solutions for your HVAC systems.

Safety steps:

In the fall, your heater needs maintenance from the professionals. It improves the working condition of your heating system. In the winter, you also need to take extra maintenance steps for your heating system. Change the air filter in every 1 or 3 months. It prevents overheating. Clean the area around the cabinet and don’t keep any inflammable items around it.

JetAirCo is helping many houses for getting a comfortable temperature for your living. If you need any help for the maintenance of your HVAC system, we have a branch in Long Island, New York. Visit us for more details.  

Furnaces are one of the most-used products in homes. It gives you warm during the winter and makes cozy weather for you. If your furnace does not produce the needed temperature, you must call a professional and get your system repaired by an expert. Don’t do it yourself unless you have professional training. JetAirCo is a very renowned company offering the HVAC maintenance service and repair in Smithtown, Northport, and long Island.

Here, we discuss some serious issues that need professional service.

Electrical issue:

An electrical issue is a major issue and it can put you and your family’s life in danger. You need to make sure that your home electrical system can carry the load of the systems you are using in your houses. If your light flickers when you turn on your system, it means that you need to recheck your electricity.

Your furnace is unusually loud:

If your furnace releases strange noises, you must call a professional and let him/her check the issues. Generally, furnaces cause a bit of sound while performing. It is because of the air blow in the system. Insulate the duct to cut down the noise of the system. If the noise doesn’t seem common to you, call JetAirCo or an HVAC service provider near you. JetAirCo is an experienced HVAC service provider in areas like Smithtown, Hauppauge, and Northport. Our professionals will visit your place and provide you with the right support.

If the furnace sound relates to pinging or popping, rattling, grinding, and more, you must hire a professional. It needs technical knowledge, and a professional service provider is the best person.

HVAC system turns on and off:

If your system frequently turns on and off, it can be a sign of a fault. There are many things associated with the problem. It can be your air filter or something else. Call JetAirCo and they will handle everything. They are offering HVAC maintenance and repair services in Smithtown.

If there is an odd smell:

When you get a strange smell, something like rotten eggs, you must leave your home immediately and take a safe place. You cannot smell natural gas, and this is why a substance adds to it to make us alert about the presence of the gas. If you smell smoothing like the rotten eggs, leave your home immediately. Don’t turn your lights on or off. Electricity can ignite the gas. Do not turn on the stove and try to keep the window open. Call a service to fix.

Your furnace is blowing cold air:

If you are getting cold air from your furnace, it must be a problem with your blower. It needs cleaning. Check the flashing light to identify the problem. If the blower light is green, it is okay. If it is red, you need to call a professional.

Your heating system gives you many hints before it completely stops. The above-mentioned details are the signs that help you know your system is running with the faults. You can call us immediately if you feel something is wrong with your system.

JetAirCo is a renowned company in New York and they are offering the right support for your heating system.

If your furnace is leaking water, there is a reason to be worried. But, don’t panic because we are always ready to reach your place and fix the issue. But, if the problem is minor, you can check it yourself and can solve the issues easily. Don’t worry! We are guiding you on this journey. If you think that it is too technical, call our professional heating service providers and they repair the issue in no time. Don’t keep the problem unattended because it can turn into bigger and dangerous issues. Call JetAirCo or visit our branch in Long Island, New York.

To fix the water leakage issue from your furnace, you need to determine first what type of furnace you have. They are mainly two types – high-efficiency condensing furnace and a conventional furnace.

Now, you are probably thinking about how to check which type of furnace you have. We are helping you with this.

If your furnace has a white PVC vent pipe on its side or its top, you have a high-efficiency furnace. If your furnace has metal pipes, you have a conventional furnace. For any furnace and boiler repairing in Smithtown, JetAirCo is near to you. Call us and get the service in no time.

The leakage repairing process will change according to your furnace. We are describing it here in brief.

For high-efficiency condensing furnace:

If you have a high efficiency condensing furnace and it leaks, it is a very common thing and is not leading to serious issues. The leakage can be caused by blocked condensate drains, condensate pump problems, or problems with the condensation line.

High-efficiency furnaces have two heat exchangers, unlike a conventional furnace that has one. These heat exchangers absorb too much heat that converts exhaust gas into the liquid state. The condensation then drains out through the condensate line. When your furnace is maintained properly, the water drains out properly without any leakage.

If your furnace system has any clog or leakage, the water accumulates around your furnace. If your high efficiency condensing furnace is leaking, call JetAirCo. Our experienced team can handle everything perfectly.

You must check the drain trap to fix the issue on your own. But if anything is broken in the system, you need professional help. Call JetAirCo and repair your furnace within your budget.

For conventional furnace:

When there is water leakage from your conventional furnace, the reasons are many, including leaky humidifier, improper vent pipe, and leakage while AC is on.

Sometimes, furnaces have an in-built humidifier. If it is clogged or has a leak, it causes water around your furnace. Improperly designed vent pipes are also the reason for the water leakage. These pipes drain away combustion gases from your house. If the pipes get clogged, the gases cool down and turn into moisture.

If you find water while your AC is on, it means that your AC causes it, not your furnace. Since the drainpipe sits top or next to your furnace, it seems your furnace causes the water. JetAirCo is one of the Best Heating Repair Services in Hauppauge, and we help many homeowners to fix their heating system problems. Call us to book your service appointment. Our main branch is located in Long Island, New York.

The maintenance of your heating system is not tough. If you want uninterrupted heating during the winter season, you should pay attention to your system. Hiring a professional for maintenance is the best thing you can do. They know about the technicalities of your system and they perform their job effortlessly without any mistake. JetAirCo is a heating service provider in Hauppauge, Smithtown, Northport, and in more areas.

Replacement of your heating system will make a big hole in your pocket. To avoid the issue, you can opt for the occasional tune-ups. Sometimes, modifying your system will give you better choices for saving. JetAirCo can help you check your system and modify it so that you can save energy as well as electricity consumption. The company has a trusted presence in New York as an HVAC service provider.

Combustion testing is one of the major processes for the maintenance of your heating system. You need an experienced name to carry out the process. Your hired professional will test your combustion efficiency two times – one before the tune-ups and another is after the tune-ups.  The result will be shown to you. Professional will check whether the combustion efficiency is 75% or not. If the tune-ups do not provide the same efficiency, you must replace your system.

The two main low combustion efficiency measures are – incomplete combustion of fuel and excessive-high flue gas temperature. When you are told that your system has a high flue gas temperature, it means that heat is lost without any use.

The affiance of your heating system also depends on the percentage of carbon monoxide or oxygen. Carbon monoxide is the end product of fossil-fuel combustion. Too little carbon monoxide denotes incomplete combustion. For the oil burner, the percentage should be 10 to 12. For gas, it is 7 to 9%.

Smoke also means a lack of combustion, and it is not present in the gas system. For the oil system, the smoke does not rank higher than 1 in a 0 to 10 scale.

Remember that carbon monoxide gas is harmful to your health and the recommended limit for the flue gas should not exceed 400 parts per million.

Only a professional can check all of these things for your heating system. So, Hire JetAirCo and let them figure out important things for your systems.

Cleaning needs special attention because different types want different handling from a professional. You need to choose a name that has years of knowledge in installing, repairing, and maintenance of different types of heating systems. When it is an oil-based heating system, an HVAC company cleans the burner, combustion chamber, oil line filter, and flue pipe. Other systems need cleaning for the heat exchanger surface. Oil nozzles and filters are replaced with the new one, and these parts are hardly cleaned by professionals.

JetAirCo can easily maintain your system. If you live in New York, the company will not take much time to reach your place. They analyze your system and fix the issue immediately. Call JetAirCo or visit Long Island, New York for your heating service.

Choosing the right size of a boiler is important when it comes to your comfort and luxury. Call a professional to guide you since you are not aware of different parts of the boilers. JetAirCo is an experienced name that understands different types of heating systems and they can guide you to buy the most needed system for your home. Since it is an investment, you must consult a professional for this. The company is offering oil furnace and boiler furnace repair services in Hauppauge, Smithtown, Northport, and more.

Heating size matters a lot to offer you a comfortable environment. The system heats the temperature when the outside air remains cold. Here, the size of the boiler does not talk about the physical size of it; rather it defines the power of the unit that is known as the output rating.

The output rating of a boiler is measured with the kilowatts (kW) unit. If you have a too big size, it increases energy consumption and leads to the wastage of fuel. A too-small boiler will not provide you with a comfortable temperature.

If you are confused about which boiler size fits your house, you can contact us. JetAirCo has a branch in Long Island but is a popular name in areas like Hauppauge, Smithtown, Northport, and in more areas.  Hire our boiler installer in Hauppauge.

You can seek help from an expert for your boiler system. But knowing different types will help you make the right decision even more prominently.

There are types of boilers are common in the market and they are:

  1. Combi Boilers
  2. System Boilers
  3. Regular Boilers

Combi boilers:

Combi boilers are a single unit and it is perfect for the small to medium size homes with one or two bathrooms. It is the most cost-effective solution for your home. It offers the central heating and hot water supply as per your demands. It does not need an additional tank or cylinder that saves space in your house.

System Boilers:

System boilers are similar to combi boilers that get water from the mains. They provide a heating system along with storing domestic hot water in a cylinder. It does not need additional space for the cylinder, although.

Regular boiler:

A regular boiler is the oldest heating system and this type of heating system is found in the traditional properties. It comes up with an extension tank and a cylinder.

These are the common types of heating system you have. Consult with JetAirCo and choose the right quality heating boiler for your house. When it comes to size, you need an expert to pick the right size. Find out the best solution from JetAirCo. Get the best boiler service in Northport and in other areas of New York. Call our service.  

A radiant heating system delivers heat to the floor or the panels installed in the wall or ceiling. This system uses the infrared radiant process to transfer heat from the hot floor to the other corner of a room. This is an interesting heating system and it is a cost-effective solution for your house also. If you want to know more about the system, you can contact JetAirCo. The company has a wide presence in New York, and you will also get the best services for your HVAC systems from us.

The radiant heating system has many advantages when it is compared to the other types of systems, including forced-air heating and baseboard heating. Those who are experiencing allergies due to the heating system can shift their attention to the radiant heating from the baseboard or forced air heating system. It does not spread allergens because it heats your home scientifically. A hydronic heating system is another common name for heating a house. This system is very popular in areas with high electricity costs since it consumes less energy. But, the radiant floor heating system has advantages over it.

The radiant heating system depends on the convection or the natural circulation of the heat. The air warmed by the floor rises above. When we talk about the radiant floor heating, you must remember that radiant floor heating is different from the radiant panel heating.

You need to call an experienced professional for installing your heating system. A professional can handle the technical parts of the system and can install it in the right way. When you take responsibility, the chances of faults will be higher. Call JetAirCo and find the best solution for your heating system. You will also get heating services in Hauppauge.

There are three types of heating systems – radiant air floor, electric radiant floor, and hot water radiant floor. The system can also be named after the installation process. For example, a wet installation needs a large thermal mass of a concrete slab. When an installer sandwiches the system between two layers of Polywood, it is called a dry installation.

Let your HVAC company decides which option proves to be the best for your house. JetAirCo is an experienced name for the HVAC systems, and we offer heating services in Smithtown and Northport. We have a branch in Long Island, New York.

Different types of heating system:

It is a cost-effective solution for those who want to keep the energy consumption within the budget. You can also use the solar air heating system, but you cannot get heating at night.

Electric radiant floor:

It uses the electric cables built in the floor and it is a costly solution for your heating. Consult with a professional for your heating system.

Hydronic heating system:

It needs heated water from a boiler that flows through the tubs installed under your floor. You can use a thermostat to regulate the temperature.

Contact JetAirCo and find out the best solution for your heating system. We repair furnace and boilers in Smithtown. Contact us for more details.   

If you use a gas furnace for heating your house, you should stay alert because it can cause dangerous situations for you and your family. The first thing that you need to do is to find the best and professional gas furnace fitters for you. They are experienced enough to install your heating system in the right way. Don’t try to fix the installation work on your own. One mistake can put you and your family in danger. JetAirCo is an experienced name for your heating system. It offers services in Long Island, Hauppauge, Smithtown, Northport, and in more areas.

When it comes to the gas furnace, an experienced name will always provide you with the right support. Remember that when you try to fix the installation, you know nothing about the technicalities. The chances of a faulty heating system become higher. It can catch fire in your house or can produce pollutant like carbon monoxide that is known as the silent killer. 

When you experience health issue while your heating system is on or your health issue gets worse, you must check your heating system to avoid any mishap. It can be the reason for the carbon monoxide released from your faulty heating system

Carbon Monoxide is a dangerous gas that does not have any color and odor. When you have a high level of carbon monoxide in the environment, it is so dangerous that it can take your life too. Children, pregnant women, aged people, and everyone exposed to the gas show serious health issues. If you are in such an environment, it shows you some signs, including:

  1. Tiredness
  2. Shortness of breath
  3. Dizziness 
  4. Headache
  5. Weakness
  6. Confusion
  7. Chest pain

If you have any symptoms mentioned above, your heating system may release carbon monoxide. Consult a doctor and get to know that whether your symptoms have any connection to the carbon monoxide or not. 

Gas heaters are essential as a home appliance. Always find an expert for installing your heating system. JetAirCo will help you install your system properly. We have an experienced team that reaches your house and analyzes your home environment. Then, we choose the right place for the installation. 

To protect you from any danger from the gas furnace, we mention some common signs of faults.

  1. You can find a yellow flame
  2. The pilot light bangs or goes out completely
  3. The discoloration of walls due to the heat damage
  4. The adjacent walls become too hot to touch
  5. Soot strains around the heater

All of these signs tell you that hire a professional heating service for your house. If you haven’t serviced your system for two years, you must immediately contact a heating system service provider near you. If you are in New York, we are with you. We are offering excellent heating system services in Long Island, Smithtown, Northport, and in many areas.