Whether you use a boiler or furnace heating system, you will experience several issues with your system after a certain period. When this happens, the first thing that might come to your mind is to call an oil Furnace & Boiler Repair service provider like JetAirCo. As one of the leading Furnaces and Boilers system providers in the regions of Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA, JetAirCo’s professionals are always available to handle Oil Burner Service quickly, Boiler repair service, Furnace Repair Services, and Boiler Installation issues. Therefore, you can rely upon us at any time of the day.

But do you know? There are specific tasks that you can perform on your own. Here, for your help, JetAirCo’s professionals come with some pocket-friendly steps that you can attempt to prevent the costly repair cost.

Step 1:- Completely Shut Down your System

Before you move further, first ensure that your heating system is turned off completely. Hence, switch off the fuel/boiler electrical power and fuel supply. This way, you can protect yourself and perform any heating system maintenance and repair.

As per JetAirCo Gas Furnace Repair Services, you will see the electrical power switch at the top of the cellar stairs or the bottom. Locating it will be easy as the electrical power switch comes with bright red color light.

Step 2:- Take Out Loosen Particles & Carbon Soot

After successfully turning off the heating system, you should take out loose particles and debris from the heating system’s combustion chamber. Remember that the procedure might take some time; however, you need to repeat the step until you completely remove carbon dioxide, water vapor, carbon soot, and other debris from the combustion chamber.

Cleaning the heating system combustion chamber will stop debris build-up on the chamber wall or any other area.

Step 3:- Inspect the Flue Pipe

To make sure your heating system’s combustion products exit from your place correctly, give special attention to the flue pipes. Besides, with It, you will quickly determine any leaks, holes, or cracks.

Hence, thoroughly inspect the flue pipe. Precisely where the lines meet the heating system. In case you experience a small leak or hole, you can wrap it with foil tape for a temporary solution. However, large leaks or holes require professional experts such as JetAirCo Heating System Repair Services.

Step 4:- Change the Oil Filter

Have you remembered when you last replace the oil filter of your heating system? No? Then instantly purchase a new oil filter and replace it with the existing one. Remember that replacing the oil filter ensures that your system will operate at its peak efficiency and prevent short pollutants from clogging the oil-burner nozzle.

Step 5:- Change the Air Filter

Once you have successfully replaced the oil filter, it’s time to consider the air filter. However, before you change the air filter, be sure you brought the perfect air filter for your heating system. Keep in mind; every air filter is unique; hence it’s crucial to choose the right one that will adequately fit your heating system. We advise you to change the air filter; it’s always better to hire a professional expert and let them perform the task on your behalf.

Step 6:- Test the Burner Efficiency

By testing the burner efficiency, you will understand the boiler’s soot level and boiler’s draft pressure.

In order to measure the boiler efficiency, simply put a probe within the exhaust flue to extract the gas sample. Then, with a thermocouple, you can easily calculate the boiler efficiency.

 Conclusion

We have full faith that you can perform the Heating Installation & Repair on your own. However, where is the harm to hire the Best Heating Repair Services for your purpose? Besides, the heating system operates at a high temperature. Hence, if, without taking necessary precautions, you want to do this on your own, you might put yourself at big risk. Henceforth, opt for the assistance of JetAirCo Furnace & Boiler Installation, Maintenance, and Repair service center. Grab our help if you stay near Hauppauge, Smithtown, Northport, and Long Island, located in New York, USA

A furnace is the most vital element of the HVAC system. When you set the thermostat, the furnace will activate to produce heat air. A blowing fan then distributes the warm air throughout your house. However, heat transfer totally depends on the furnace type.

Now, there are several types of furnaces available on the market and how you can pick up the one that will fulfill your requirements.?

Here, the professional of jetAirCo’s Furnace Repair Services comes to your rescue. In this short passage, we will explain some of the best-recommended furnace types and their functions.

Types of Furnaces:

Bear in mind, furnaces come in different sizes, and users mainly pick up a furnace accoding to their home size.  Keep an eye on the remaining guide as here we have explained some top-notches furnace types and the way they work.

1. Single Stage Furnace:

This furnace type consists of a solo gas valve that allows gas to progress at the highest rate. Besides, if you use a single-stage furnace, you will get total control over the gas flow. This type of furnace is particularly designed to maintain fluency; however, you might often hear unwanted sounds from the single-stage furnace.

This single-stage furnace work at 80 percent of fuel efficiency will perfectly fit small and mild areas. Keep in mind; less technology involves installing this type of furnace, and you don’t need to spend much money to complete the setup process. Also, as minimal furnace repair require, you can use this type of furnace for the longest time.

2. Modulating Furnace:

A modulating furnace is a kind of furnace that permits the user to change how much warmth is delivered at some random time. This implies it generally works at ideal warming. Despite the fact that models change, most are intended to run utilizing 1% increments or diminishes to permit the heater to screen how much warmth is required. A modulating furnace guardedly adjusts the yield by holding the temperature of your house.

A modulating furnace is efficient and gives steady temperatures throughout your home. Do you stay in a place where winters tend to last for a long period of time? Then a modulating furnace will be the best choice for you.

 

3. Electric Furnace:

Don’t want to use a gas furnace? Then buy an electric furnace.  To use a gas furnace, you have to install gas pipelines first. However, some homeowners don’t prefer to set up gas pipes and opt for electric furnaces.

Besides, if you have a tight budget, then utilizing an electric furnace will be ideal. Also, you don’t have to think about toxic fumes and carbon monoxide with an electric furnace, and can install it on your own.

4. Two-Stage Furnaces:

The two-stage furnace gives you more control over the gas flow compared to the single-stage furnace. In order to adjust the heating load power demand, the two-stage furnace can communicate with the thermostat.

During the cold seasons, the furnace’s thermostat will automatically open the gas valves and help the furnace use its full power.  A two-stage furnace also comes with an extended heating cycle, which means absorbing the hot air and replacing it with cold air, making your residence comfortable for summer.

5. Natural Gas Furnace:

This is another prominent furnace you can opt for. One of the unique benefits of utilizing natural gas furnaces is that they don’t breakdown easily and save thousands of repair costs.

Natural furnaces utilize the most limited amount of fuels means using a natural gas furnace in your residence decreases the monthly bills.  The natural furnace is the cleanest. Hence you don’t need to think about pollution.

6. Oil Furnace:

If you decide to use an oil furnace, at first, make sure that you have enough space to store oil. Besides, make contact with a company who will regularly deliver you oil.

This type of furnace releases lots of heat; however, you can easily distribute them into your house. Unfortunately, the dust and soot buildup makes these furnaces high expensive to operate. Besides, if you haven’t changed the air filter regularly as well as cleaned the chimney regularly, you might put yourself and your family members at the risk of fire.

For Further Assistance, Contact JetAirCo

hese are some of the on-demand furnaces that you can install in your home. To complete the installation task, it’s highly recommended to hire professional experts such as JetAirCo. At JetAirCo, we are assembled with a team of experienced technicians who have the ability to install your furnace with no downtime. Therefore, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, just make us a call, and JetAirCo’s Furnace Installation and Repair Services will be present at your service.

Your HVAC systems make your living comfortable and beautiful. But, when you have invested in the wrong system, it will make your experience disappointed. You may not get the right temperature, and your expenses go higher and higher every month. If you are not happy with your system, you can consult with an HVAC professional near you. They will guide you buy the right heating system for your work. JetAirCo can help you find the right answer for your heating system. We have been in the service for many years, and we offer HVAC service in Northport, Hauppauge, Smithtown, and more.

When you install the correct size, it benefits you in many ways. You will get proper functions and can cut down the energy cost also. When it comes to the comfort level, your product will offer you the best support.

Noise is another factor that your HVAC system makes. But, when you have the right size system, you can reduce the noise level also. The only way to know the right heating system for your house is by hiring an experienced heating system service provider. You can contact any name near you and have them by your side when planning for your system. We suggest you go for the experienced name because it needs the knowledge to analyze the heating system and installation.

Professionals do the measure in the square footage. Besides, other things are also important to know your system’s right size, and they are windows, insulation, and age of the home. Do not buy a too large system for your heating. It does not benefit you.

When you invest in the oversized furnace, it goes on and off frequently. This short cycle causes hot and cold spaces in your home. Besides, it causes too much noise which disturbs your peace.

Check the AFUE rating when buying a heating system. AFUE is Annual Fuel Utilization Efficiency. It measures the efficiency of your furnace. The minimum rating is 80%. But, you can opt for the higher efficiency rating also. The high-efficiency rating is between 90%-98%. Its upfront charges are higher, but you can save money in the long run.

Let a professional decide which option is the best for you. JetAirCo has always been there to meet your demands. You can contact us anytime to fix the HVAC issues. If you want the best heating system for your home, we are ready to serve your demands.

Knowing your furnace always helps you take care of your system in a better way. Not all furnaces work the same. This is why you need to check the AFUE (Annual Fuel Utilization Efficiency) of your system. The higher the efficiency, the better your system works. If you need any help for maintaining your heating system, JetAirCo offers you the most satisfying service that quickly solves your heating system problems. We have an experienced team for your system maintenance. Since we have been in the fields for many years, we have earned the knowledge of handling different technologies. You will get the best heating system maintenance service in Smithtown, Long Island, Northport, and other areas.

Nearly every furnace has similar features, and the numbers go high or down as per the price. If you use a gas furnace, we have mentioned your furnace’s key factors and how they work. This detail will help you know more about your furnace.

Variable speed blowers:

Variable speed defines the furnace’s fan motor, which has a different speed to control the furnace’s heat.

Blower motor:

The blower motor helps the warm air passes through the ducts. It takes care of the cycling air process.

Air filtration:

With air filtration, you can improve the air quality coming from your furnace. An electrostatic filter is attached to your system to trap particles.

Heat exchanger:

In a heat exchanger, the air gets heated.

Venting:

Venting is a significant part of your furnace. It has pipes from the furnace to the outside, allowing the gases to go out of your house.

Zoned heating:

This heating system creates different zones or areas in your house for the heating. You can control these zones separately by using a thermostat. If you have a large home, the zone heating proves to very effective for you.

Your HVAC system enhances your comfort inside your house. So, they have a role to play in your happy life. If you experience any problem with your system, call JetAirCo. Issues in your HVAC systems can put your life in danger.

JetAirCo offers heating maintenance service in Smithtown, Northport, and in other areas of New York. Consult with our experienced professionals about your heating and cooling system.

Sometimes, your system just wants a replacement. You cannot detect the need because you are not aware of the problems your system may go through. An aging system is better to be replaced than repaired. There are some signs that your system gives before its complete breakdown. If your system needs frequent repairs, you can search for new systems.

If the energy bills are increasing every month, it denotes a problem with your heating system. You can have us checked the system to find out problems. Call JetAirCo for more details. We are always ready to serve your demands.

If your furnace starts blowing cold air, this is genuinely the situation that makes you worried. The comfort of heating in the freezing weather gets disturbed completely, and you need the right solutions immediately to restore your peace and comfort. JetAirCo has always been there with you for serving you the proper heating solutions. We have experienced professionals who visit your place and check your furnace to fix the issue. We offer heating services in Hauppauge, Smithtown, Northport, and other areas of New York. If you have any problems with your HVAC systems, you will always have us beside you.

If your furnace is blowing cold air, there are a few things that could cause this problem. Here, we have mentioned all possible reasons for your furnace blowing cold air instead of the warm, comfortable breeze.

Incorrect thermostat setting:

Sometimes, people set their thermostats wrongly, which causes this problem. Keep your thermostat always in the AUTO setting. Your furnace will run correctly. Check the battery of your thermostat also. If the battery is dead, your furnace will stop working.

Sometimes, you bought the wrong thermostat for your system. This incompatible issue causes heating problems. Check your thermostat or hire a professional who will check your thermostat and the compatible issue.

Dirty air filter:

Your air filter gets blocked due to the lack of maintenance. It disturbs the airflow, and you do not get satisfied with heating for your comfort. It also increases the chances of overheating in the system. The safety switch will shut off the burners to prevent any dangerous situation.

If you are using a disposable filter, you can change it. If it the permanent, then you can clean your air filter. But, hiring a heating professional is the safest option to fix the issue. It involves checking technical parts, which you cannot do.

Clogged condensate line:

High-efficiency furnaces generate condensed liquid, which the system drains away. But, if the condensate drains line gets clogged, the furnace will start blowing cold air. JetAirCo has always been ready to meet your requirements. Visit our branch in Long Island, New York. We are actively serving in areas like Hauppauge, Smithtown, Northport, and other areas.

No Pilot light:

You will not get a pilot light if it is blown out or not lighting correctly. Due to blockage, the pilot light may not be lighting correctly. You can relight the pilot light carefully. If it is not lightened or goes out again in a minute, call an HVAC service provider. Your system needs an expert solution.

Leaky ducts:

If you have an old system, leaky ducts are a very common problem. Leaky ducts cause heat loss, increasing energy consumption. JetAirCo can protect you from the growing energy bills. Our solution is effective and affordable also.

Insufficient gas supply:

If your gas supply gets disturbed, you will not get heating from your furnace. Check your gas supply and check the valve also.

In the winter, do not spend a day without your furnace. We give you the right solution for you. Call JetAirCo, and you will get immediate service for your heating system. We offer heating services in Hauppauge, Smithtown, Northport, and other areas of New York.

You need a proper function from your furnace in the winter when the outside temperature is freezing. But, if you think your furnace is always ready to meet the peak demands, you are wrong. If it is not maintained, your furnace works hard to raise the temperature, increasing your energy consumption bills. JetAirCo shares tips with you to make your furnace ready for the winter. We offer heating system services in Smithtown, North Port, Hauppauge, Long Island, and in other areas of New York.

Your furnace will work without any faults when you pay attention to the maintenance. While an annual servicing of your furnace improves the system’s performance, you can check a few things on your own to make the system work finely.

Turn on your thermostat:

Set your thermostat in the heating mode and raise the temperature higher than your room temperature. If your system does not turn on, check your thermostat’s inside by opening up the cover. If everything is perfect there, check the power source of your heating system. If you still do not find anything wrong there, call a professional. Do not check the technical things of your furnace as it can be dangerous.  We offer Heating Systems Services in Smithtown and other areas of New York. Give us a call to know more about our services.

Clean your air filters:

Air filters are an important part of your furnace. Since it filters the air, it can be clogged by dust and dirt. Cleaning your filter improves the functions of your furnace. Replace your furnace every few months. If you use a permanent electrostatic filter, you clean the filter and use it.

Cover the AC Condenser:

If your heating system is not a heat pump, cover up your AC condenser to avoid icicle build up in the system. Do not use a moisture-trapping plastic trap to wrap it up.

Clean the system’s heat exchanger:

You cannot perform this task because it needs technical knowledge. Hire an HVAC service provider near you to clean your heat exchanger. JetAirCo is a renowned name for maintaining HVAC systems in New York. We have a team of experienced professionals who visit your place and check your systems. They will quickly fix the issues to restore your comfort inside your house. Don’t spend a day without your furnace in the winter. Call us soon.

Lubricate and clean the blower motor:

Read your manufacturer’s manual, and if it permits you for the lubrication, you can do this. Turn off the power and clean and open the caps of bearings. Lubricate the bearings to get a smooth function.

Check your igniter switch:

If you have an old furnace, you may need to relight the pilot. The modern systems have electronic ignitors. If the ignitor is not working, press the reset button of your system. If it is still not working, call JetAirCo. We will reach your place and will offer you the best service.

Check your carbon monoxide detectors:

Your furnace produces carbon monoxide gas that throws away from your house through the ventilation.  A carbon monoxide detector detects the presence of the gas and alerts you. This is a dangerous gas for your health. So, make sure that your carbon monoxide detector always performs perfectly. If you want to know more about our services, give us a call. We are a popular HVAC service provider in New York. Connect with us for more details.

Changing air filters does not cost you high, but ignoring this can lead you to big and expensive furnace repair in the future. So, routinely check your air filter and do the necessary steps to keep it clean. When it gets clogged, you can opt for replacing the filter with the new one. An air filter is an important part of your furnace. It has a direct connection with the quality of the air inside your house. So, to keep your health happy, check the air filter of your furnace. You can call a professional to get the best advice on it. JetAirCo is a trusted name when it comes to HVAC system maintenance. It has a team of professionals who visit your place and solve all problems with your system. Visit Long Island, New York, to communicate with us.

We are active in areas like Hauppauge, Smithtown, North Port, and other New York places. When your air filter is working properly, your system remains perfect without any chance of dirt build-up inside the system. Our experts recommend changing the filter once in three months. Here are some of the facts that you might ignore when considering the value of your air filter.

The heating and cooling efficiency:

The performance of your heating system will go high when you have a cleaned air filter. For the efficiency of your furnace, concentrate on the filter quality. When the particles start building up in your furnace, it needs a costly repair. 

If you need any consultation for your HVAC system, JetAirCo is always ready to offer a quick solution. Do not compromise with your comfort since we are always available for your service.

Avoid unnecessary repair cost:

a clean air filter also saves your money. A dirty filter disturbs a proper airflow in the system, causing overheating and sudden shutdown like issues. You can avoid expensive repairs with a clean air filter.

Improve air quality:

The quality of the air will enhance when you invest time and money in the air filter. The filter keeps the dust and dirt away from you, offering a healthier environment to live in.

The benefits of changing air filters are many when you think about your health. If you are confused about which filter to buy, JetAirCo extends its helping hands to you. The customer support team is always available for your queries. You can also directly contact us by visiting our branch. We are located in Long Island, New York. For any HVAC system related problems, we will be happy to help you.  

A furnace in the winter season gives you real relief from the chilling weather. The performance of your furnace depends on the maintenance. If you follow the experts, they recommend bi-annual maintenance for your HVAC maintenance. If you have already followed all the guidelines and still find problems in your furnace, we are providing you with some easy tips so that you can check your furnace and fix the problems without anyone’s help. If you do not have the technical knowledge, let an expert handle it.

JetAirCo is offering the best HVAC maintenance service in Smithtown, Northport, Hauppauge, and in other areas of New York. If you need quick help with your HVAC systems, contact us and stay relaxed. We will offer the right solution for you. 

For your furnace troubleshooting tips, we tried to cover as many details as possible below:

1.A thermostat is set properly:

Sometimes, the main problem is in the thermostat itself. So, before calling a professional, check your thermostat and ensure that it is set in the ‘heat’ mode. The temperature may be accidentally turned down a few degrees. Set the temperature as per your comfort. If the set temperature does not provide you the needed comfort, turn the temperature high. 

2. Change the thermostat batteries:

If your thermostat runs on batteries, you need to check whether the batteries go dead or not. Most of the time house owners do not check it and they call a professional to fix furnace problems.

3. Check circuit breaker:

Sometimes, your furnace stops working because you may have blown a fuse. Check the fuse box and find out the problems to fix. 

4. Fuel source:

When you are handling your furnace, you must maintain the safety issue. Sometimes, the fuel source gets turned off by accident. If you smell gas, contact JetAirCo immediately because only professionals can handle the issue rightly. 

These are the things that you can do by yourself. But, some problems need only experts and you must call a reliable name for your HVAC that can fix the issue properly. Choose the experienced HVAC company near you. We are offering the best HVAC maintenance in Smithtown, Northport, and Hauppauge. 

When you need to call JetAirCo:

  1. If your furnace causes clanging, banging, and other noises, you must call a professional service for your HVAC systems.
  2. If there is any gas line issue, it should be handled by an expert.
  3. If your furnace has a faulty pipe light or furnace flame, this situation also needs a professional.

Call JetAirCo and let them handle your furnace issue if the problem is too technical. We have a branch in Long Island, New York. 

The furnace filter is one of the important parts of a furnace and it also improves the air quality. You cannot overlook the maintenance of the filter because it can cause so many health issues. Since experts always recommend change furnace filter, many people are asking questions about how they can reuse the furnace filter without lowering the air quality. You can contact JetAirCo to know the right way for the maintenance of your heating service. You will get the heating installation service in Long Island, Hauppauge, Smithtown, and in more areas.

A dirty filter causes a dangerous atmosphere:

When your filter is dirty, it does not filter the pollutants from the air. Even a little bit dirty also interrupts the airflow and your heating system also works hard to keep the space warm. So, it will increase your energy-consuming costs because of the reduced airflow.

The real problem is also associated with a filter that is clogged. In that case, no air can pass through it. The heated air overheats the heat exchanger and your furnace will stop performing.

Types of furnace filter:

If you are worried about the cleaning of the filter, you can seek help from professionals. JetAirCo will offer heating system repair and maintenance service. The company has a wide presence in Hauppauge, Smithtown, Northport, and in other areas.

Before you pick the maintenance, you have to be aware of the type of system you have. There are two types of filters used in the furnace – disposable and permanent filters. If your furnace runs with the disposable filter, you need to change it in every 2 to 3 months. It depends on the size and type of filter.

If you are using a permanent filter, you can reuse your filter after a proper cleaning. You can follow some easy tips to clean your filter. You need to check the part and clean it. You need to ensure that the filter should not be too dirty.

Cleaning the permanent filer does not take too much time, anyone can do this. Just remover the filter from the furnace and rinse it to clean the dust. Dry it completely and insert it the furnace again.

How to improve air quality:

If you are concerned about the indoor air quality, you can choose the filter with the MERV rating. The higher the rating, the finer the filtration will be. The rating decides the size of the particles the filter is capable of filtering.

So, this can help you a lot. If you want more detailed information, you can call JetAirCo. The company is offering heating services for your systems in Hauppauge, Smithtown, Northport, and in more areas. 

Furnaces are one of the most-used products in homes. It gives you warm during the winter and makes cozy weather for you. If your furnace does not produce the needed temperature, you must call a professional and get your system repaired by an expert. Don’t do it yourself unless you have professional training. JetAirCo is a very renowned company offering the HVAC maintenance service and repair in Smithtown, Northport, and long Island.

Here, we discuss some serious issues that need professional service.

Electrical issue:

An electrical issue is a major issue and it can put you and your family’s life in danger. You need to make sure that your home electrical system can carry the load of the systems you are using in your houses. If your light flickers when you turn on your system, it means that you need to recheck your electricity.

Your furnace is unusually loud:

If your furnace releases strange noises, you must call a professional and let him/her check the issues. Generally, furnaces cause a bit of sound while performing. It is because of the air blow in the system. Insulate the duct to cut down the noise of the system. If the noise doesn’t seem common to you, call JetAirCo or an HVAC service provider near you. JetAirCo is an experienced HVAC service provider in areas like Smithtown, Hauppauge, and Northport. Our professionals will visit your place and provide you with the right support.

If the furnace sound relates to pinging or popping, rattling, grinding, and more, you must hire a professional. It needs technical knowledge, and a professional service provider is the best person.

HVAC system turns on and off:

If your system frequently turns on and off, it can be a sign of a fault. There are many things associated with the problem. It can be your air filter or something else. Call JetAirCo and they will handle everything. They are offering HVAC maintenance and repair services in Smithtown.

If there is an odd smell:

When you get a strange smell, something like rotten eggs, you must leave your home immediately and take a safe place. You cannot smell natural gas, and this is why a substance adds to it to make us alert about the presence of the gas. If you smell smoothing like the rotten eggs, leave your home immediately. Don’t turn your lights on or off. Electricity can ignite the gas. Do not turn on the stove and try to keep the window open. Call a service to fix.

Your furnace is blowing cold air:

If you are getting cold air from your furnace, it must be a problem with your blower. It needs cleaning. Check the flashing light to identify the problem. If the blower light is green, it is okay. If it is red, you need to call a professional.

Your heating system gives you many hints before it completely stops. The above-mentioned details are the signs that help you know your system is running with the faults. You can call us immediately if you feel something is wrong with your system.

JetAirCo is a renowned company in New York and they are offering the right support for your heating system.

If your furnace is leaking water, there is a reason to be worried. But, don’t panic because we are always ready to reach your place and fix the issue. But, if the problem is minor, you can check it yourself and can solve the issues easily. Don’t worry! We are guiding you on this journey. If you think that it is too technical, call our professional heating service providers and they repair the issue in no time. Don’t keep the problem unattended because it can turn into bigger and dangerous issues. Call JetAirCo or visit our branch in Long Island, New York.

To fix the water leakage issue from your furnace, you need to determine first what type of furnace you have. They are mainly two types – high-efficiency condensing furnace and a conventional furnace.

Now, you are probably thinking about how to check which type of furnace you have. We are helping you with this.

If your furnace has a white PVC vent pipe on its side or its top, you have a high-efficiency furnace. If your furnace has metal pipes, you have a conventional furnace. For any furnace and boiler repairing in Smithtown, JetAirCo is near to you. Call us and get the service in no time.

The leakage repairing process will change according to your furnace. We are describing it here in brief.

For high-efficiency condensing furnace:

If you have a high efficiency condensing furnace and it leaks, it is a very common thing and is not leading to serious issues. The leakage can be caused by blocked condensate drains, condensate pump problems, or problems with the condensation line.

High-efficiency furnaces have two heat exchangers, unlike a conventional furnace that has one. These heat exchangers absorb too much heat that converts exhaust gas into the liquid state. The condensation then drains out through the condensate line. When your furnace is maintained properly, the water drains out properly without any leakage.

If your furnace system has any clog or leakage, the water accumulates around your furnace. If your high efficiency condensing furnace is leaking, call JetAirCo. Our experienced team can handle everything perfectly.

You must check the drain trap to fix the issue on your own. But if anything is broken in the system, you need professional help. Call JetAirCo and repair your furnace within your budget.

For conventional furnace:

When there is water leakage from your conventional furnace, the reasons are many, including leaky humidifier, improper vent pipe, and leakage while AC is on.

Sometimes, furnaces have an in-built humidifier. If it is clogged or has a leak, it causes water around your furnace. Improperly designed vent pipes are also the reason for the water leakage. These pipes drain away combustion gases from your house. If the pipes get clogged, the gases cool down and turn into moisture.

If you find water while your AC is on, it means that your AC causes it, not your furnace. Since the drainpipe sits top or next to your furnace, it seems your furnace causes the water. JetAirCo is one of the Best Heating Repair Services in Hauppauge, and we help many homeowners to fix their heating system problems. Call us to book your service appointment. Our main branch is located in Long Island, New York.

If you use a gas furnace for heating your house, you should stay alert because it can cause dangerous situations for you and your family. The first thing that you need to do is to find the best and professional gas furnace fitters for you. They are experienced enough to install your heating system in the right way. Don’t try to fix the installation work on your own. One mistake can put you and your family in danger. JetAirCo is an experienced name for your heating system. It offers services in Long Island, Hauppauge, Smithtown, Northport, and in more areas.

When it comes to the gas furnace, an experienced name will always provide you with the right support. Remember that when you try to fix the installation, you know nothing about the technicalities. The chances of a faulty heating system become higher. It can catch fire in your house or can produce pollutant like carbon monoxide that is known as the silent killer. 

When you experience health issue while your heating system is on or your health issue gets worse, you must check your heating system to avoid any mishap. It can be the reason for the carbon monoxide released from your faulty heating system

Carbon Monoxide is a dangerous gas that does not have any color and odor. When you have a high level of carbon monoxide in the environment, it is so dangerous that it can take your life too. Children, pregnant women, aged people, and everyone exposed to the gas show serious health issues. If you are in such an environment, it shows you some signs, including:

  1. Tiredness
  2. Shortness of breath
  3. Dizziness 
  4. Headache
  5. Weakness
  6. Confusion
  7. Chest pain

If you have any symptoms mentioned above, your heating system may release carbon monoxide. Consult a doctor and get to know that whether your symptoms have any connection to the carbon monoxide or not. 

Gas heaters are essential as a home appliance. Always find an expert for installing your heating system. JetAirCo will help you install your system properly. We have an experienced team that reaches your house and analyzes your home environment. Then, we choose the right place for the installation. 

To protect you from any danger from the gas furnace, we mention some common signs of faults.

  1. You can find a yellow flame
  2. The pilot light bangs or goes out completely
  3. The discoloration of walls due to the heat damage
  4. The adjacent walls become too hot to touch
  5. Soot strains around the heater

All of these signs tell you that hire a professional heating service for your house. If you haven’t serviced your system for two years, you must immediately contact a heating system service provider near you. If you are in New York, we are with you. We are offering excellent heating system services in Long Island, Smithtown, Northport, and in many areas. 

When your heater suddenly stops, it is a reason for worry. You are probably searching for a possible answer to this problem. If you are not a technical person, you must call a professional heating service and solve your problem. Contact JetAirCo and find the right solution for your heating system. They are offering services in Hauppauge, Smithtown, Northport, and more.

A sudden stop of your heating system is a common problem and you can contact your nearest heating service provider for this. We discuss here some of the important notes for taking care of your system.

Furnaces manufactured after the 1990s have a safety switch or safety shut out. Whenever there is a technical error, your furnace will shut off. You have to solve the technical errors to turn on your heating system.

Here are some common technical errors that your system may have:

  1. Dirty evaporator coil
  2. Clogged pipes
  3. Full air filter
  4. Broken wires
  5. Dead blower motor

You need to contact the best HVAC company for solving the errors. JetAirCo is a renowned company and you can call them for repairing your system. They are offering heating services in areas – Hauppauge, Smithtown, Northport, and Long Island.

If there is no gas, your heater will not work. We all know that the central heating system can be run with different fuels, including gas, electricity, and water. People sometimes forget to turn on the power breaker switch. If the problem still persists, call JetAirCo and get a solution for your system. We have a branch in Long Island, New York.

Sometimes, the gas valve of your system gets stuck and this situation, your heating system will not work. You should not skip the maintenance work of your system. You can check the maintenance of your furnace.

Furnace maintenance can be effective. It solves all possible faults that stop your heating system. The maintenance of the furnace includes so many important factors.

JetAirCo offers a comprehensive maintenance process for your heating system.

We take care of every process for your system, including:

  1. Motors spin without resistance
  2. Clogged pipes
  3. Full air filter
  4. Broken wires
  5. Full air filters
  6. Burnt control board

If the entire system does not start properly, you must contact the best HVAC service provider and solve the issue. JetAirCo is an experienced name. The company is offering heating services in Hauppauge, Smithtown, Northport, and more. Book our services.

A power flush is required when your central heating system builds sludge in it and you do not get enough heating for your comfort. Whenever you feel that our system is not working properly, you can opt for the power flush for your central heating system. But, if you are looking for the exact answer to the question, you can opt for the power flush for every 5 to 6 years. Consult with an experienced HVAC service like JetAirCo. The company has a branch in Long Island, New York.

What is a power flush?

A power flush is nothing but a process of cleaning your central heating system. It is done through circulating the high volume of forced water along with the cleaning agents for clearing the debris. Contact JetAirCo and let them handle this process. Experienced professionals are there to take care of your system.

Here, we come up with a set of questions that help you to decide when the right time is for power flush for your central heating.

If you have new radiators, you no need to do the power flush. But, if you feel cold spots on the radiator, it is a sign of corrosion or sludge in your systems. This sludge may travel to your radiator and causes a cold spot. In this case, you need to do power flushing your system.

When your radiator is less than 4 years old:

If your radiator is less than 4 years old and you have a mild steel radiator and you are living in the hard water area, you will experience the normal rate of corrosion.

But when you have a stainless steel radiator and experience cold spots on the bottom of the radiator, it shows you a sign of faults. You can also check the boiler or plumbing of your heating system. Sometimes, the cold spot can be caused by them also. Hire an experienced professional team for heating service.

JetAirCo is offering heating services in Hauppauge, Smithtown, Northport, and in other areas. Contact the professional team and start repairing your system. Professionals, there are experienced in handling different types of systems and they are well aware of both modern and traditional components of the heating and cooling system.

When you have a 5 years old radiator:

If your radiator is 5 years old, you can opt for the power flushing to maintain your system. But, you can need this process of cleaning for every 8 to 10 years and that too depends on the material used in your system.

How do you know your system needs power flushing?

You can feel the bottom of the radiator and if you find a cold spot, you can opt for the power flushing option. Contact JetAirCo and hire an experienced heating system service provider. We offer services in the area of Hauppauge, Smithtown, Northport, and more. Our main branch is located in Long Island, New York.

If you have a heating system and you want to keep it always active, especially in the winter, you need to follow a few tricks. The first thing that helps you to maintain your furnace is to check the faults of a system. Like everything, a furnace also shows a few signs before it gets stopped completely. So, you need to identify them and repair them when you have time. Call JetAirCo and find the right solution for your heating system. We are active in Smithtown, Northport, Long Island, and more areas.

Here, we are discussing the most specific signs that tell – you have a faulty furnace. If you discover any of them, contact JetAirCo.

Your furnace starts blowing cold air:

When your furnace registers blow cold air, you need to concentrate on this and call a heating expert to repair the problem. Your furnace never blows cold air when it is turned on. When you start the system, you may get cold air for a second or two, but it does not last long. If you get cold air from your furnace for a longer time, you must contact JetAirCo. The company is a trusted name for the households in Long Islands.

Your furnace stops blowing air:

When you feel that your heating register does not blow any air, your system needs a repair from an experienced HVAC company. An active and well-maintained furnace always blows the warm air.

The furnace makes strange sounds all day long:

If you hear a strange sound coming from your system, it is a matter of worry and you need to take care of the facts. If the sound is like an airplane is taking off from the ground, you must consult with an experienced professional and get it repaired soon. Sometimes, a furnace may be noisy at the beginning, but if the sound lasts, it has problems.

Water leaking from the furnace:

If you are experiencing water leakage from your furnace, it is a cause of worry and you need to call an HVAC system service provider for repair. You must check your furnace for the water leakage throughout a year to ensure that there is no such problem.

Gas leaking from your furnace:

Gas leaking is one of the serious problems. If you smell the gas leaking from your furnace, you need to open your furnace and find out the gas supply valve. Shut it off immediately and then keep you away from the furnace. Call an expert furnace repairing service for fixing the issue.

So, these are some of the main problems that tell you – the furnace is having faults and it needs repairing. Call JetAirCo and immediately solve the problems for uninterrupted comfort. We are offering services in Long Island, Hauppauge, Smithtown, and Northport. Call us to book our services.