As one of the costly & energy-hungry aspects of your house, your heating system needs careful installation, maintenance, and control in order to operate at the highest efficiency. Common Heating System installation mistakes lead to inefficiencies and unable to provide you with the desired temperature.
So if you are new in the heating system installation market, you probably want to know the best possible way to install the heating system without any hassle. Continue reading the guide as here we bring something unique for you.
Common Installation Mistakes and their Solutions :
Following are the mistakes the people make during the Heating system installation procedure. Let’s understand them one by one.
1. Implementing a Poor Drainage System
If the drainage system hasn’t filtered properly, it creates a fairly substantial amount of moisture in the heating system operating. This can lead to backed-up pipes and even mold growth.
Unfortunately, a poor drainage system is one of the most common heating systems installation mistakes. Hence, it will always be better to call a professional service provider and hand over the task to them. They will install the drainage system properly and make sure that everything is in its right place.
2. Wrongly Installation of Thermostat
Many people don’t know that thermostat has a huge effect on the Heating system performance. However, improperly installing the thermostat is another common mistake that people make while installing their system. As a result, you have to put extra pressure to start your system.
Now you might think, what will be the ideal place to install the thermostat? The thermostat’s perfect location will be far away from the air vents and in a place where the sunlight hardly reaches. Remember that a properly installed thermostat will provide an accurate temperature.
3. Inappropriately Sealing the Air Ducts
Improperly sealing the air ducts is another common mistake that most users made while trying to install the Heating system on their own. Always remember there should not be any cracks in the ductwork. Also, it would help if you closed up all the other cracks with a permanent sealer.
If you need any assistance, then immediately contact your local Heating system service provider. They will make sure that the air ducts are snugly secured in their position.
4. Improperly Placing the Condenser
The condenser is the most crucial part of the heating system. The less it works, the more efficiently your system will run. Not only condenser save the optimal energy, but it increases the lifecycle of your system as well.
How to decrease strain on your Heating system? Regular clean it. Apart from this, you have to make sure that you put the condenser in the right place.
5. Picking the Wrong Size Unit
Another common mistake people make when installing the heating system in their home or office. If your unit is small for your house, this will cause your system to work harder. As a result, you have to pay higher energy bills. On the other hand, if you select a big size unit, it means you spent unnecessary extra money.
There are multiple unit sizes available in the market, and you should pick up the one that matches your place’s need.
6. Ignore the Air Flow
If you wish to get your system’s peak performance, ensure that there is unrestricted airflow within the system. If the airflow becomes restricted or blocked, this can stain the system to a large degree and lost its ability to adjust your home temperature.
Therefore while planning for a heating system installation, give special attention to the airflow system and provide your family members with a friendly environment.
7. Place Air Vents in Wrong Areas
The air vent’s location is important to the functionality of your heating system. If you install them in the wrong areas, you will struggle to get adequate airflow, and unfortunately, this is also a common mistake.
So how to avoid this mistake? Simple spread the air vents throughout your house and place them in areas where they won’t be wrapped up with other objects.
8. Not Regularly Clean the Condenser
To run your system efficiently, the condenser needs to have at least 2 to 2.5 feet of clearance on each side. If you don’t do so, your system might break down completely. Hence, keep this thing in mind and then start installing your heating system.
Want to Avoid these Common Mistakes? Contact us today
Heating system installation and maintenance mistakes can cost you hugely. Wist, to avoid huge expenses? If yes, we here at JetAirCo are the people you can rely upon. Our HVAC installation and maintenance service center is located in Hauppauge, Smithtown, Northport, and Long Island. We have installed countless heating systems over the years. Regardless of your heating system installation needs, our teams of dedicated professionals can accommodate you.
