A furnace is the most vital element of the HVAC system. When you set the thermostat, the furnace will activate to produce heat air. A blowing fan then distributes the warm air throughout your house. However, heat transfer totally depends on the furnace type.

Now, there are several types of furnaces available on the market and how you can pick up the one that will fulfill your requirements.?

Here, the professional of jetAirCo’s Furnace Repair Services comes to your rescue. In this short passage, we will explain some of the best-recommended furnace types and their functions.

Types of Furnaces:

Bear in mind, furnaces come in different sizes, and users mainly pick up a furnace accoding to their home size.  Keep an eye on the remaining guide as here we have explained some top-notches furnace types and the way they work.

1. Single Stage Furnace:

This furnace type consists of a solo gas valve that allows gas to progress at the highest rate. Besides, if you use a single-stage furnace, you will get total control over the gas flow. This type of furnace is particularly designed to maintain fluency; however, you might often hear unwanted sounds from the single-stage furnace.

This single-stage furnace work at 80 percent of fuel efficiency will perfectly fit small and mild areas. Keep in mind; less technology involves installing this type of furnace, and you don’t need to spend much money to complete the setup process. Also, as minimal furnace repair require, you can use this type of furnace for the longest time.

2. Modulating Furnace:

A modulating furnace is a kind of furnace that permits the user to change how much warmth is delivered at some random time. This implies it generally works at ideal warming. Despite the fact that models change, most are intended to run utilizing 1% increments or diminishes to permit the heater to screen how much warmth is required. A modulating furnace guardedly adjusts the yield by holding the temperature of your house.

A modulating furnace is efficient and gives steady temperatures throughout your home. Do you stay in a place where winters tend to last for a long period of time? Then a modulating furnace will be the best choice for you.

 

3. Electric Furnace:

Don’t want to use a gas furnace? Then buy an electric furnace.  To use a gas furnace, you have to install gas pipelines first. However, some homeowners don’t prefer to set up gas pipes and opt for electric furnaces.

Besides, if you have a tight budget, then utilizing an electric furnace will be ideal. Also, you don’t have to think about toxic fumes and carbon monoxide with an electric furnace, and can install it on your own.

4. Two-Stage Furnaces:

The two-stage furnace gives you more control over the gas flow compared to the single-stage furnace. In order to adjust the heating load power demand, the two-stage furnace can communicate with the thermostat.

During the cold seasons, the furnace’s thermostat will automatically open the gas valves and help the furnace use its full power.  A two-stage furnace also comes with an extended heating cycle, which means absorbing the hot air and replacing it with cold air, making your residence comfortable for summer.

5. Natural Gas Furnace:

This is another prominent furnace you can opt for. One of the unique benefits of utilizing natural gas furnaces is that they don’t breakdown easily and save thousands of repair costs.

Natural furnaces utilize the most limited amount of fuels means using a natural gas furnace in your residence decreases the monthly bills.  The natural furnace is the cleanest. Hence you don’t need to think about pollution.

6. Oil Furnace:

If you decide to use an oil furnace, at first, make sure that you have enough space to store oil. Besides, make contact with a company who will regularly deliver you oil.

This type of furnace releases lots of heat; however, you can easily distribute them into your house. Unfortunately, the dust and soot buildup makes these furnaces high expensive to operate. Besides, if you haven’t changed the air filter regularly as well as cleaned the chimney regularly, you might put yourself and your family members at the risk of fire.

For Further Assistance, Contact JetAirCo

hese are some of the on-demand furnaces that you can install in your home. To complete the installation task, it’s highly recommended to hire professional experts such as JetAirCo. At JetAirCo, we are assembled with a team of experienced technicians who have the ability to install your furnace with no downtime. Therefore, if you stay near Hauppauge, Smithtown, Northport, and Long Island, New York, just make us a call, and JetAirCo’s Furnace Installation and Repair Services will be present at your service.

Your heating system is one of the most crucial components for adjusting a comfortable temperature inside your home. When you have an effective heating system, your life will be much easier and bring comfort to your home infrastructure.

Sitting inside of a hot home in the middle of the summer can be more than unbearable. Besides, it’s also bad for your health. As per the World Health Organization, the temperature inside your house shouldn’t increase above 78 degrees if you wish to avoid the possible health risks that can come along with the summer’s appearance.

Hence, if your house seems too hot this summer, it indicates that you need to have heating system repair done instantly and maintain a comfortable temperature within your house.

Signs your Place Might Require Heating System Repair:

Identifying, whether your heating system needs repairs or not, isn’t rocket science. However, it will be challenging for the normal homeowner to identify a flaw in the heating system. Remember that most of these signs are hidden and can be easily overlooked. These are the top 5 signs that indicate your heating system needs repairs instantly.

1.   High Utility Bills:

When your utility bills increase beyond your imagination, then possibly your heating system is the culprit. Besides, if your gas bills increase suddenly,  it could be because of your heating system.

With time, your heating system becomes less efficient and reduces efficiency. This means your system might take longer to provide your house the right temperature. Hence, check the last 3-4 months bills, and if you found that bills increase drastically, then it’s the perfect time to call a professional technician to repair your system.

2.   Burner Flame Turns Yellow:

We hope you notice that your heating system comes with a blue gas burner flame. If the burner flame suddenly turns yellow, it indicates that something happens wrong with your heating system. A yellow flame indicates the carbon monoxide present in your house. Carbon monoxide gas is very dangerous-especially for your children and pets. Therefore, when you see the furnace flame turning yellow, stop using your system and instantly contact a heating system service provider.

3.   Hear Unwanted Noise from your System:

Do you ever hear unwanted noise from your heating system whenever you want to start it? If yes, that’s not a good sign. It indicates there’s something wrong inside your system that’s causing this noise, and you have to call a technician to come and stop this unwanted sound.

4.   Thermostat Fluctuate Constantly:

If you have to adjust the thermostat too many times, it means something happens wrong. Also sometimes you might face difficulties adjusting some rooms temperature. Unfortunately, if you cannot adjust the thermostat after several attempts, leave the thermostat and pay attention to your heating system. There’s a possibility that the system might not equally distribute temperature to every room and due to this some room feels hot and others a bit cold.

You should quickly address the problem in order to prevent things from getting worse.

5.   Age of your System:

Like other appliances, a heating system also offers its service for a certain period of time. Generally, you can use your heating system for 7 to 8 years. However, if you maintain it well, the longevity can be up to 10 years. Not more than that.

Also, a pilot light is an amazing way to notify whether your heating system is old. If your system contains a pilot light, it means you use an old heating system. If this is the circumstance, then replacing your heating system with a new one will always be fruitful for you.

Grab the Best heating System Repair Service with JetAirCo

We hope till now you have understood the possible signs of heating system replacement. Looking for the best heating system repair service in  Hauppauge, Smithtown, Northport, and Long Island, New York? Your search can be ended with JetAirCo. By providing quality services to our customers, we acquire a strong reputation in the same field. Rely upon us and enjoy this summer with an effective heating system.

As the environment changes and gets warmer, it’s the perfect time to focus on your heating system maintenance and get ready for the extreme heat of summer that surely lies ahead. And if you wish to get high-quality indoor air and feel relax, you must maintain your heating system each spring. Besides, daily maintenance can improve your system’s efficiency, save your precious time, money, and easily avoid the need for emergency repairs.

To well-maintain your heating system, you can take help from this guide and keep your family member comfortable and cool this summer.

1. Change the Air Filters:

If you continuously use your heating system, the air filter will fill with debris and dirt after a certain period of time. If this happens then, the air filter will clog up and decrease the airflow. As a result, your heating system will work harder in order to adjust your required temperature. Besides, a clogged filter will also increase the utility bills. On the other hand, if you replace the clogged filter, your system will consume less energy, save your money on energy cost, and improve the indoor air quality. In case you are not sure how to detect and change the air filter, stay on the safe side and call a professional technician.

Besides, you are advised to take off the AC unit to the outside. However, it’s a small step, but you have to do it. Keep in mind if the AC cover is left on, your heating system won’t be able to produce much air.

2. Clean the System Unit:

Always remember grime, dust, and dirt can accumulate around the heating system unit throughout the winter. This is another vital task that you should do before summer knocks on your door. Hence, clean the coils and remove all dust and debris from areas surrounding the unit. Keep an eye on the condenser unit and ensure there are no nests around the unit. You are also advised to register and sehedule for maintenance so the professional technician can check the condenser unit for any damage and perform the necessary repairs. You can thoroughly check out the outside part of the unit, and don’t ever try to open the unit on your own to avoid possible injuries. In addition, if you want to clean the condenser unit, the task must be performed by a professional.

3. Upgrade the Thermostat:

If your heating system won’t have a programmable thermostat, spring is the ideal time to buy. Also, when you set the thermostat to 78 degrees for 8 hours a day, you can even save up to 15 % on your heating and cooling bills per year. The purpose of the thermostat is to keep the temperature more comfortable during the day. In order to upgrade your thermostat, hire a professional and don’t walk into a hothouse anymore.

4. Seal the Air Duct Work:

Remember that if the air ducts are cleaned and sealed properly, your heating system will provide its peak performance in the warmer months and save you money.

5. Add a Heat Pump or air conditioner to your Heating System in Spring:

If you are searching for adding cooling to your heating system, the ideal time to do in spring. In the summer months, there will be a huge demand for heating systems. Hence the price will be higher at that time. Besides, you might have to wait for a couple of days as summer is the busiest season for the heating and cooling system. Hence, if you want to add an air conditioner or heat pump to your system, instantly call out a professional and install it on your device.

6. Inspect the Boiler and Furnace:

Due to numerous reasons, your boiler can stop working. Most of the time, if dirt and dust gather over the heating system, your boiler might stop responding. In order to properly maintain your furnace or boiler, first check if the issue can be repaired or not. If yes, then hire a professional technician and leave the rest of the task to them.

If you use the boiler for more than 10 years, we suggest replacing it with a new one. Spring is the best time to replace the boiler as, during the spring months, the prices will low, and you can easily afford the expenses.

7. Inspect Ventilation and Radiation:

Ventilation delivers heat to your house. On the other hand, radiation will heat the surrounding air. Sometimes, it might tap air within the radiation, and if it happens, the heating system unit doesn’t fill up with water. As a result, your system will consume more fuel and expend more energy to adjust the temperature.

In these circumstances, hire a heating system specialist who will check every point from which air enters your house. Besides, they will also make sure that ventilation and radiation work smoothly and the electronic system will thoroughly communicate with the rest of the system.

8. Make a Schedule for your Heating System Maintenance:

Always remember spring is the best season for heating system maintenance. When you work on your system on hot days, you are going to take risks. Therefore, book an appointment for your heating system maintenance and hire a professional technician to maintain your system well.

JetAirCo is here to help

At JetAirCo, we will maintain, repair, and replace any part of your heating system. Our technicians will analyze your problem first and give you the best solution to your problem. We provide our heating system maintenance service in Hauppauge, Smithtown, Northport, and Long Island. Call us today and get the best heating system maintenance and repair service in New York.

As one of the costly & energy-hungry aspects of your house, your heating system needs careful installation, maintenance, and control in order to operate at the highest efficiency. Common Heating System installation mistakes lead to inefficiencies and unable to provide you with the desired temperature.

So if you are new in the heating system installation market, you probably want to know the best possible way to install the heating system without any hassle. Continue reading the guide as here we bring something unique for you.

Common Installation Mistakes and their Solutions :

Following are the mistakes the people make during the Heating system installation procedure. Let’s understand them one by one.

1.   Implementing a Poor Drainage System

If the drainage system hasn’t filtered properly, it creates a fairly substantial amount of moisture in the heating system operating. This can lead to backed-up pipes and even mold growth.

Unfortunately,  a poor drainage system is one of the most common heating systems installation mistakes. Hence, it will always be better to call a professional service provider and hand over the task to them. They will install the drainage system properly and make sure that everything is in its right place.

2.   Wrongly Installation of Thermostat

Many people don’t know that thermostat has a huge effect on the Heating system performance. However, improperly installing the thermostat is another common mistake that people make while installing their system. As a result, you have to put extra pressure to start your system.

Now you might think, what will be the ideal place to install the thermostat? The thermostat’s perfect location will be far away from the air vents and in a place where the sunlight hardly reaches. Remember that a properly installed thermostat will provide an accurate temperature.

3.   Inappropriately Sealing the Air Ducts

Improperly sealing the air ducts is another common mistake that most users made while trying to install the Heating system on their own. Always remember there should not be any cracks in the ductwork. Also, it would help if you closed up all the other cracks with a permanent sealer.

If you need any assistance, then immediately contact your local Heating system service provider. They will make sure that the air ducts are snugly secured in their position.

4.   Improperly Placing the Condenser

The condenser is the most crucial part of the heating system. The less it works, the more efficiently your system will run. Not only condenser save the optimal energy, but it increases the lifecycle of your system as well.

How to decrease strain on your Heating system? Regular clean it. Apart from this, you have to make sure that you put the condenser in the right place.

5.   Picking the Wrong Size Unit

Another common mistake people make when installing the heating system in their home or office. If your unit is small for your house, this will cause your system to work harder. As a result, you have to pay higher energy bills. On the other hand, if you select a big size unit, it means you spent unnecessary extra money.

There are multiple unit sizes available in the market, and you should pick up the one that matches your place’s need.

6.   Ignore the Air Flow

 If you wish to get your system’s peak performance, ensure that there is unrestricted airflow within the system. If the airflow becomes restricted or blocked, this can stain the system to a large degree and lost its ability to adjust your home temperature.

Therefore while planning for a heating system installation, give special attention to the airflow system and provide your family members with a friendly environment.

7.   Place Air Vents in Wrong Areas

The air vent’s location is important to the functionality of your heating system. If you install them in the wrong areas, you will struggle to get adequate airflow, and unfortunately, this is also a common mistake.

So how to avoid this mistake? Simple spread the air vents throughout your house and place them in areas where they won’t be wrapped up with other objects.

8.   Not Regularly Clean the Condenser

To run your system efficiently, the condenser needs to have at least 2 to 2.5 feet of clearance on each side. If you don’t do so, your system might break down completely.  Hence, keep this thing in mind and then start installing your heating system.

Want to Avoid these Common Mistakes? Contact us today

Heating system installation and maintenance mistakes can cost you hugely. Wist, to avoid huge expenses? If yes, we here at JetAirCo are the people you can rely upon. Our HVAC installation and maintenance service center is located in Hauppauge, Smithtown, Northport, and Long Island. We have installed countless heating systems over the years. Regardless of your heating system installation needs, our teams of dedicated professionals can accommodate you.

A heating system is a device for adjusting temperatures at a satisfactory level; by utilizing thermal energy inside a home, office, or another dwelling. It’s a part of the HVAC (heating, ventilation, air conditioning ) system. The heating system can either be a central heating system or distributed.

If you continuously use your heating system for a couple of years, you might have to repair one or more components of your heating system after a certain time. Or even need to replace them. Besides, if you haven’t well-maintain your heating system, dirt, dust, and debris might stop your system from functioning properly.

Keep reading the guide as here we are about to discuss the possible signs of heating system repairs and maintenance and the precautions to avoid further damage.

Signs, It’s the Ideal  time for Repairing your Heating System

If you encounter any one of the following issues with your heating system, then it’s the right time to repair or service your heating system from a professional expert.

Inadequate Air Flow:

One of the most significant heating problems is a dirty or clogged air filter. Remember that depending on your home or office size, you have to change the air filter. Besides, to function properly, your system requires proper ventilation. And a dirty and clogged air filter might increase the temperature of your place. Therefore, if you change the air filter at least once a year, it will increase your system’s efficiency and lifespan.

Faulty Pilot Light:

A faulty pilot light makes it harder for you to start your heating system, and it can even cause a fire hazard. The heating system must have a blue pilot light that indicates your system receives enough oxygen. If blue light turns yellow, it means there’s something happens wrong. In such circumstances, you are advised to immediately call out a technician to fix the problem at the earliest time.

Faulty Thermostat:

If the thermostat is installed inappropriately or faulty, your system will stop working. Also, if you feel a temperature variation or your system seems to be cycling more than usual, it’s time to repair your heating system.

Dirty Air Vents:

Over time, the air vents collect lots of debris or dust. Dirty or clogged, air vents not only wear down your system but provide dirty air throughout your place. Therefore, if you notice that the air vents are dirty or clogged it will be best to hire a professional to avoid further damage.

Why Rely Upon Professional Experts?

We know you have full confidence that you will repair your heating system on your own. However, there are many tasks that only a professional can perform. These are some of the points that will make you understand the importance of hiring a professional expert.

Don’t Compromise with your Safety:

 The heating system generally operates on very high current values, and if you want to repair your system on your own, you might get a fatal shock. On the other hand, professionals always wear safety gear while working around these systems. Hence, don’t take the risk of your and your family member’s life and hire a professional to complete the task.

Save your Valuable Time and Money:

Even if you have enough knowledge in the same field, it will take your lot of time to learn the repairing physically. Besides, you need to purchase several tools and equipment to repair the system. When you call out the best repair service provider, they will visit your house with the necessary tools. Also, they have years of experience in repairing and servicing, so they know how to deal with the situation.

Contact Us and Get the best Heating Repair Service

So the next time when you experience troubles regarding your heating system, consider all the damage you might cause in a DIY repair and hire a professional technician. JetAirCo is a famous name in heating system repair service, and we will deliver our service at an affordable price. We are assembled with a team of experienced technicians who will thoroughly analyze your issue and provide the best way to repair it. If you live near Hauppauge, Smithtown, Northport, and Long Island areas, you can contact our heating system repair and maintenance service center. Start working with us and take advantage of our services.

With a heating mechanic, you can adjust the temperature as per the season.  Home owners continue to rely upon the heating system to get comfortable throughout the year. Now imagine the situation, there’s so much cold outside and inside you want to use your heating machine, raise the temperature, and discover that your heating system stops working. What will happen? Definitely, you will be frustrated. But do you know, with regular maintenance, you can avoid this hassle?

Continue reading as here going to discuss the key benefits of maintaining a heating system and how you can will-maintain it.

Why It’s Essential to Maintain Heating System?

According to experts, the easiest way to make sure your heating system’s reliability, efficiency, and performance are to maintain it regularly. The given points will help you to understand the necessity of heating system maintenance.

Lower the Utility Bill:

If you well-maintained heating system, your system will consume lower energy and reduce your energy bill.

Prevent the Costly Repairs:

This is probably the biggest reason for which you should daily maintain your heating system. Remember that if you are not maintaining your heating system regularly, minor issues can quickly turn into big problems. One of many reasons for heating system maintenance is identifying and fixing the problem areas before the system failure.

Increase the Air Quality:

If you clean the air filters regularly and remove dust and mold from the filters,  the indoor air quality will improve. So, regular maintenance will keep you and your family members healthy and happy.

Rise Safety:

A well-maintained heating system will protect you and your family from carbon monoxide poisoning. Hence, you are suggested to thoroughly check your heating system and search for any carbon monoxide leakage that can be harmful to your loved ones. Besides, regular maintenance can also help you to keep the temperature under control.

Add Years to your Hearting System’s LifeCycle:

Undoubtedly regular maintenance will extend the life of your heating system. According to experts, normally, a heating system can last for 7 to 8 years. However, with proper maintenance, you can use it for up to 10 years.

The Way you can Maintain Your Heating System:

Here’s a summary of how to well-maintain your heating system.

Inspect the Heat Pump:

In order to make sure that the heating system is working fine, it’s essential to maintain the heat pump. It can be more essential during the winter season. Hence, in the winter months, you must thoroughly check the heat pump and ensure that it does not have ice-gathering.

Clean & Replace the Filter:

This is another effective way to maintain your system. You must replace the air filter inside the heating system once a month.

Clean the Ducts:

Cleaning the ducts is something that needs to be done on a daily basis. If you avoid the air ducts, dust and mold might gather over the ducts, and your heating system will stop responding.

Besides all these things, the best way to well-maintain your heating system is to hire a professional. An expert has enough knowledge and can deal with any problem, whether it’s major or minor. For this, you can get in touch with the experts of JetAirCo. If you stay near Hauppauge, Smithtown, and Long Island areas you can contact any one of our services center. Contact us today and grab the best heating system maintenance service in New York.

As the name says, space heaters can heat a single room or a small area. Whereas central heating heats different rooms of your house, space heaters have very limited use and are perfect for zone heating.  You have many options to fuel your heating systems, including electricity, natural gas, propane, fuel oil, and more. Portable heaters are mainly electric. The home heating system is a vast area, which includes different systems for heating the temperature of your house. Depending on the weather, climate, area, and preferences, you can buy a home heating system for your needs. You can also consult with a home heating system service provider near you. They are experts in the field and come up with the right solution that will meet your requirement perfectly.

Operation:

Space heaters can run on electricity or flammable fuel, such as natural gas, kerosene, propane, or wood. Electric space heaters are very common, and they come in different categories – convection heaters, infrared heaters, and heat pumps.

Convection heaters make the heating element hot by passing the electricity through it. The heating elements are made of metal or ceramic. Using convection, the system transfers heat to the air. Some systems use a fan to distribute the heat in a better way.

Infrared heaters also heat the conductive wire by passing electricity through it. It is mostly based on radiant heating, where hot wires warm the solid surface by emitting infrared rays. It does not warm the air directly.

Heat pumps do not produce heat; rather, it moves heat from outside to inside for warming the temperature. It cools down the temperature also by reversing the process.

Radiant heater:

It produces infrared radiation, which is easily absorbed by your skin before heating the air in the space. This type of heating system works perfectly for a poorly insulated home.

When you are using a heating system, safety is an unavoidable thing to consider. The space heater has the risk of fire, burns, and carbon monoxide poisoning.

You can follow some safety tips to keep your home environment safe and secure from any mishap.

Safety:

  1. Plug space heaters directly into the wall outlet instead of an extension cord.
  2. Check the plugs and cords to identify periodical damages.
  3. Keep the flammable material at least 3 feet away from the heater.
  4. Turn off your heater when you are away from home, or you are sleeping.

You can hire a heating expert to take care of your systems. They have wide knowledge in the area and will solve your problem quickly. JetAirCo is a coveted name for your heating system repair and maintenance. We have an experienced team who will visit your place and analyze the problem to figure out the right solution. If you live near Hauppauge, Smithtown, Northport, and Long Island areas, we can efficiently serve your demands. Please call us if you need urgent help with your HVAC systems.

Electric resistance heating is another way for your home heating systems, especially when electricity is the only choice for you. This system converts electricity into useable heat for your home. Due to the too much consumption of electricity, this heating system is costly to maintain. The combustion heating choices are a better option if you are looking for a cost-effective solution.  JetAirCo brings this topic to you for your information purpose. You can contact us anytime for your heating system maintenance and repair. We have an experienced team who will visit your place to fix your heating system issues.

Types of electric resistance heating system:

Electric furnace:

It is similar to your gas or oil-fired furnace. The only difference is that the system runs on electricity. You can also improve the efficiency of your heating system just like you do with your forced-air system by sealing ducts and replacing the filters.

Electric baseboard heaters:

This heating system comes up with electric heating elements enclosed in a metal pipe. They run through the baseboard of each room for heating your home. If you are looking for a zoning system, this proves to be the best option for you. Install a thermostat for each room for controlling the temperature. It will offer you the most customized option for your heating system.

Electric wall heater:

An electric wall heater is another form of electric resistance heating. It includes an electric heating element that has a fan to move the air in the heating element. This system is installed in the interior wall of your house.

Electric thermal storage:

This type of heating system is very advantageous where utility company charges higher during the day and lower rate at night. You can store heat at night to cut down the cost.

If you want to know more about the electric heating resistance system, you can contact us. We have the best team of heating system professionals who will take care of your needs pretty well.

In our blog, we tried to educate people about different types of heating and cooling system. Exploring the advantages and disadvantages of your system, you can make a better decision for the maintenance of your HVAC systems.

We are mainly located in Long Island, New York. But our service areas include Hauppauge, Smithtown, Northport, and more. You can contact us to learn more about your system. If you are not satisfied with your heating and cooling systems, you can contact us to enhance the efficiency. We have been in this field for many years, and we earn knowledge in handling different types of your heating system. Contact us for more details.